EN 14035-28-2004 en Fireworks - Part 28 Roman candles - Specification and test methods (Incorporating Corrigendum May 2006 Remains Current)《焰火 第28部分 罗马蜡烛 规范和试验方法》.pdf

1、BRITISH STANDARD BS EN 14035-28:2004 Incorporating corrigendum May 2006 Fireworks Part 28: Roman candles Specification and test methods ICS 71.100.30 BS EN 14035-28:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 13 December 2004 BSI 200

2、8 ISBN 978 0 580 64461 0 National foreword This British Standard is the UK implementation of EN 14035-28:2004, incorporating corrigendum May 2006. It partially supersedes BS 7114-2:1988 and BS 7114-3:1988, which have been declared obsolescent. NOTE BS 7114-2:1988 and BS 7114-3:1988 are cited in The

3、Fireworks (Safety) Regulations 1997. The start and finish of text introduced or altered by corrigendum is indicated in the text by tags. Text altered by CEN corrigendum May 2006 is indicated in the text by . The UK participation in its preparation was entrusted to Technical Committee CII/47, Firewor

4、ks. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity

5、 from legal obligations. Amendments/corrigenda issued since publication Date Comments Implementation of CEN corrigendum May 2006 30 November 2008EUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN1403528 August2004 ICS71.100.30 Englishversion FireworksPart28:RomancandlesSpecificationandtest methods Ar

6、tificesdedivertissementPartie28:Chandelles romainesSpcificationsetmthodesdessai FeuerwerkskrperRmischeLichterTeil28: AnforderungenundPrfverfahren ThisEuropeanStandardwasapprovedbyCENon14June2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisE

7、uropean Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcerningsuchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlang

8、uagemadebytranslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusastheofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Ita

9、ly,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal,Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitat

10、ioninanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN1403528:2004:E Incorporating corrigendum May 2006EN 14035-28:2004 (E) 2 Contents page Foreword4 1 Scope 6 2 Normative references 7 3 Terms and definitions .7 4 Construction.7 4.1 Means of ignition .7 4.2 Attachment of initial

11、 fuse7 4.3 Protection of initial fuse7 4.3.1 General7 4.3.2 Initial fuse protected by fuse cover .7 4.3.3 Initial fuse protected by primary pack or selection pack 8 4.3.4 Protruding fuse designed to resist side ignition8 4.4 Materials of firework case.8 4.5 Integrity.8 4.6 Net explosive content8 4.7

12、 Mass of report charge .8 4.8 Vertical stability .8 5 Performance .9 5.1 Initial fuse .9 5.2 Invisible burning 9 5.3 Principal effects .9 5.4 Functioning 9 5.5 Sound pressure level 9 5.6 Height of explosions and bursting (if applicable) 9 5.7 Burning matter .10 5.8 Stability .10 5.9 Integrity of the

13、 firework case after functioning 10 6 Primary pack or selection pack10 7 Minimum labelling requirements10 7.1 General10 7.2 Type name, category and number of shots 10 7.3 Safety information .11 7.3.1 General11 7.3.2 Category 2 Roman candles.11 7.3.3 Category 3 Roman candles.11 7.3.4 Placing instruct

14、ions: .12 7.4 Name, address and telephone number of manufacturer or distributor or importer.12 7.5 Reference to this standard .12 7.6 Printing .13 7.6.1 Labelling .13 7.6.2 Type size.13 7.7 Marking of very small Roman candles 13 7.7.1 Reduced size13 7.7.2 Reduced information.13 7.8 Additional inform

15、ation on the primary pack (if applicable).13 8 Test methods13 8.1 Attachment of protruding fuse (type test and batch test) .14 8.1.1 Apparatus .14 BS EN 14035-28:2004EN 14035-28:2004 (E) 3 8.1.2 Procedure.14 8.2 Vertical stability test (type test) .14 8.2.1 Apparatus.14 8.2.2 Procedure.14 8.3 Perfor

16、mance (type test and batch test).14 8.3.1 Test environment.14 8.3.2 Apparatus.15 8.3.3 Procedure.17 8.4 Determination of net explosive content (type test)18 8.4.1 Apparatus.18 8.4.2 Procedure.18 8.5 Side ignition of initial fuse (type test) .18 8.5.1 Material .18 8.5.2 Test area.19 8.5.3 Apparatus.1

17、9 8.5.4 Test specimen19 8.5.5 Procedure.19 8.6 Labelling (type test and batch test) .21 Annex A (normative) Type testing 22 A.1 General .22 A.2 Number of Roman candles to be tested22 A.3 Loose pyrotechnic composition 23 A.4 Thermal conditioning23 A.5 Mechanical conditioning.24 A.5.1 Apparatus.24 A.5

18、.2 Procedure.28 A.6 Number of primary packs to be examined28 A.7 Test report28 Annex B (normative) Batch testing 31 B.1 General .31 B.2 Sampling plans 31 B.3 Unit of product.31 B.4 Nonconformities 31 B.5 Test report33 B.6 Acceptance or rejection of a batch33 B.6.1 Nonconforming units 33 B.6.2 Critic

19、al nonconforming units .34 B.6.3 Major nonconforming units34 B.6.4 Minor nonconforming units34 B.6.5 Roman candles supplied in primary packs or selection packs34 Annex C (normative) Method for determination of smouldering rate of cigarette 35 Annex D (informative) A-Deviations .36 BS EN 14035-28:200

20、4EN 14035-28:2004 (E) 4 Foreword This document (EN 14035-28:2004) has been prepared by Technical Committee CEN/TC 212 “Fireworks”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endors

21、ement, at the latest by February 2004, and conflicting national standards shall be withdrawn at the latest by February 2004. This European Standard is one of a series of standards as listed below. EN 14035-1, Fireworks - Part 1: Terminology. EN 14035-2, Fireworks - Part 2: Categorisation. EN 14035-3

22、, Fireworks - Part 3: Aerial wheels - Specification and test methods. EN 14035-4, Fireworks - Part 4: Bangers and banger batteries - Specification and test methods. prEN 14035-5, Fireworks - Part 5: Batteries and combinations - Specification and test methods. EN 14035-6, Fireworks - Part 6: Bengal f

23、lames - Specification and test methods. EN 14035-7, Fireworks - Part 7: Bengal matches - Specification and test methods. EN 14035-8, Fireworks - Part 8: Bengal sticks - Specification and test methods. EN 14035-9, Fireworks - Part 9: Crackling granules - Specification and test methods. EN 14035-10, F

24、ireworks - Part 10: Double bangers - Specification and test methods. EN 14035-12, Fireworks - Part 12: Flash bangers and flash banger batteries - Specification and test methods. EN 14035-13, Fireworks - Part 13: Flash pellets - Specification and test methods. EN 14035-15, Fireworks - Part 15: Founta

25、ins - Specification and test methods. EN 14035-17, Fireworks - Part 17: Ground spinners - Specification and test methods. prEN 14035-18, Fireworks - Part 18: Hand-held fountains - Specification and test methods. EN 14035-19, Fireworks - Part 19: Hand-held sparklers - Specification and test methods.

26、prEN 14035-20, Fireworks - Part 20: Jumping crackers - Specification and test methods. prEN 14035-21, Fireworks - Part 21: Jumping ground spinners - Specification and test methods. EN 14035-22, Fireworks - Part 22: Mines - Specification and test methods. EN 14035-23, Fireworks - Part 23: Non-hand-he

27、ld sparklers - Specification and test methods. EN 14035-24, Fireworks - Part 24: Novelty matches - Specification and test methods. BS EN 14035-28:2004EN 14035-28:2004 (E) 5 prEN 14035-25, Fireworks - Part 25: Party poppers - Specification and test methods. EN 14035-27, Fireworks - Part 27: Rockets -

28、 Specification and test methods. EN 14035-28, Fireworks - Part 28: Roman candles - Specification and test methods. EN 14035-29, Fireworks - Part 29: Serpents - Specification and test methods. prEN 14035-31, Fireworks - Part 31: Shell-in-mortars - Specification and test methods. prEN 14035-32, Firewo

29、rks - Part 32: Snaps - Specification and test methods. prEN 14035-33, Fireworks - Part 33: Spinners - Specification and test methods. EN 14035-34, Fireworks - Part 34: Table bombs - Specification and test methods. prEN 14035-35, Fireworks - Part 35: Throwdowns - Specification and test methods. EN 14

30、035-36, Fireworks - Part 36: Wheels - Specification and test methods. prEN 14035-37, Fireworks - Part 37: Whistlers - Specification and test methods. prEN 14035-38, Fireworks - Part 38: Shot tubes - Specification and test methods. According to the CEN/CENELEC Internal Regulations, the national stand

31、ards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, S

32、lovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 14035-28:2004EN 14035-28:2004 (E) 6 1 Scope This document specifies requirements for the construction, performance, primary packaging and labelling of Roman candles and the corresponding test methods. It is applicable to firewor

33、ks which are classified as Roman candles in categories 2 and 3 in EN 14035-2. It is not applicable to Roman candles containing pyrotechnic composition which includes any of the following substances: arsenic or arsenic compounds; mixtures containing a mass fraction of chlorates greater than 80 %; mix

34、tures of chlorates with metals; mixtures of chlorates with red phosphorus; mixtures of chlorates with potassium hexacyanoferrate(II); mixtures of chlorates with sulfur; mixtures of chlorates with sulfides; lead or lead compounds; mercury compounds; white phosphorus; picrates or picric acid; potassiu

35、m chlorate with a mass fraction of bromates greater than 0,15 %; sulfur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 %; zirconium with a particle size of less than 40 m. NOTE In EN 14035-2, Roman candles are classified as follows: - Brief description: tube contai

36、ning alternate propellant charges, pyrotechnic units and transmitting fuse(s). - Principal effects: ejection of pyrotechnic units in succession, producing a series of visual and/or aural effects, in the air. Schemes for type testing of Roman candles and batch testing of Roman candles are specified i

37、n annex A and annex B respectively. BS EN 14035-28:2004EN 14035-28:2004 (E) 7 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the refe

38、renced document (including any amendments) applies. EN 14035-1:2003, Fireworks Part 1: Terminology. EN 14035-2, Fireworks Part 2: Categorisation. EN 61672-1, Electroacoustics - Sound level meters - Part 1: Specifications (IEC 61672-1:2002). EN 61672-2, Electroacoustics - Sound level meters - Part 2:

39、 Pattern evaluation tests (IEC 61672-2:2003). EN ISO 845, Cellular plastics and rubbers Determination of apparent (bulk) density (ISO 845:1988). EN ISO 868, Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003). EN ISO 2439, Flexible cel

40、lular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:1997, including Technical Corrigendum 1:1998). ISO 2859-1, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection. 3 Terms an

41、d definitions For the purposes of this document, the terms and definitions given in EN 14035-1:2003 apply. 4 Construction 4.1 Means of ignition The means of ignition shall be identified by a protruding fuse. Conformity to this requirement shall be verified by visual examination. 4.2 Attachment of in

42、itial fuse The attachment of the protruding fuse to the Roman candle shall be secure when tested in accordance with 8.1. 4.3 Protection of initial fuse 4.3.1 General The initial fuse shall be protected in one of the ways specified in 4.3.2, 4.3.3 or 4.3.4. 4.3.2 Initial fuse protected by fuse cover

43、An orange fuse cover shall be in place over the initial fuse. Conformity to this requirement shall be verified by visual examination. BS EN 14035-28:2004EN 14035-28:2004 (E) 8 4.3.3 Initial fuse protected by primary pack or selection pack The Roman candle shall be contained in a primary pack or sele

44、ction pack conforming to 6. Conformity to this requirement shall be verified by visual examination. 4.3.4 Protruding fuse designed to resist side ignition When tested in accordance with 8.5, the protruding fuse shall not ignite. 4.4 Materials of firework case The tube shall be made of paper, cardboa

45、rd or plastics. The base and/or means of fixing shall be made of non-metallic material. Conformity to these requirements shall be verified by visual examination. 4.5 Integrity There shall be no holes, splits, dents or bulges in the tube. There shall be no holes or splits in the end closure. If the e

46、nd closures are separate components, they shall be securely in place. If the base is a separate component, it shall be securely in place. Conformity to these requirements shall be verified by visual examination. 4.6 Net explosive content When determined in accordance with 8.4, a category 2 Roman can

47、dle shall have a net explosive content of not more than 50,0 g. Each pyrotechnic unit shall have a net explosive content of not more than 10,0 g. When determined in accordance with 8.4, a category 3 Roman candle shall have a net explosive content of not more than 300,0 g. Each pyrotechnic unit shall

48、 have a net explosive content of not more than 50,0 g. 4.7 Mass of report charge When determined in accordance with 8.4, a category 2 Roman candle shall not contain more than 5 pyrotechnic units containing report composition and each of these pyrotechnic units shall have a net explosive content of not more than 5,0 g of black powder or 4,0 g nitrate/metal-based report composition or 2,0 g perchlorate/metal-based report composition. 4.8 Vertical stability For Roman candles designed to be placed on the gr