EN 14064-1-2010 en Thermal insulation products for buildings - In-situ formed loosefill mineral wool (MW) products - Part 1 Specification for the loose-fill products before install.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 14064-1:2010Thermal insulation productsfor buildings In-situ formedloose-fill mineral wool (MW)productsPart 1: Specification for the loose-fillproducts before installationB

2、S EN 14064-1:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 14064-1:2010.The UK participation in its preparation was entrusted to TechnicalCommittee B/540/6, Fibrous and inorganic thermal insulationmaterials.A list of organizations represented on this comm

3、ittee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 54929 8ICS 91.100.60Compliance with a British Standard cannot confer immunity fromlegal ob

4、ligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2010.Amendments issued since publicationDate Text affectedBS EN 14064-1:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14064-1 February 2010 ICS 91.100.60 English Ve

5、rsion Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation Produits isolants thermiques pour le btiment - Isolation thermique forme sur chantier base de laine minrale (MW) - Partie 1 :

6、 Spcification des produits en vrac avant linstallation Wrmedmmstoffe fr Gebude - An der Verwendungsstelle hergestellte Wrmedmmung aus Mineralwolle (MW) - Teil 1: Spezifikation fr Schttdmmstoffe vor dem Einbau This European Standard was approved by CEN on 9 January 2010. CEN members are bound to comp

7、ly with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Managem

8、ent Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the

9、 official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania

10、, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved wor

11、ldwide for CEN national Members. Ref. No. EN 14064-1:2010: EBS EN 14064-1:2010EN 14064-1:2010 (E) 2 Contents Page Foreword 51 Scope 72 Normative references 73 Terms, definitions, symbols and abbreviations .83.1 Terms and definitions .83.2 Symbols and abbreviations 84 Requirements .94.1 General 94.2

12、For all applications . 104.2.1 Thermal conductivity Thermal resistance. 104.2.2 Weight of the sale unit . 104.2.3 Settlement 104.2.4 Reaction to fire 124.2.5 Durability characteristics . 124.3 For specific applications 134.3.1 General . 134.3.2 Airflow resistivity 134.3.3 Water absorption 134.3.4 Wa

13、ter vapour diffusion resistance 134.3.5 Reaction to fire of product in standardized assemblies simulating end-use applications. 134.3.6 Release of dangerous substances 134.3.7 Continuous glowing combustion 145 Test methods . 145.1 Sampling 145.2 Conditioning 145.3 Testing . 145.3.1 General . 145.3.2

14、 Thermal resistance and thermal conductivity . 155.3.3 Reaction to fire 166 Designation code 167 Evaluation of conformity 167.1 General . 167.2 Initial type testing . 177.3 Factory production control 178 Marking and labelling . 17Annex A (normative) Determination of the declared values of thermal re

15、sistance and thermal conductivity . 20A.1 Introduction . 20A.2 Input data . 20A.3 Declared values. 20A.3.1 General . 20A.3.2 Case where thermal resistance and thermal conductivity are declared . 21A.3.3 Case where only thermal resistance is declared . 22Annex B (normative) Factory production control

16、 23Annex C (normative) Specimen preparation method for thermal resistance and thermal conductivity test . 25BS EN 14064-1:2010EN 14064-1:2010 (E) 3 C.1 Principle 25C.2 Procedure . 25C.2.1 Specimen preparation method for ventilated roof spaces application. 25C.2.2 Specimen preparation method for clos

17、ed cavities application. . 26Annex D (normative) Specimen preparation method for water absorption test . 27D.1 Principle 27D.2 Procedure . 27Annex E (normative) Specimen preparation method for airflow resistivity test . 28E.1 Principle 28E.2 Procedure . 28Annex F (normative) Testing for reaction to

18、fire of products . 29F.1 Scope 29F.2 Product and installation parameters 29F.3 Standardized Mounting and fixing . 30F.3.1 Test specimens for EN ISO 11925-2 (Ignitability) and EN 13823 (SBI) . 30F.3.2 EN ISO 11925-2 (Ignitability) . 30F.3.3 EN 13823 (SBI) . 30Annex G (normative) Testing for reaction

19、to fire of products in standardised assemblies simulating end-use application(s) . 31G.1 Scope 31G.2 Product and installation parameters . 31G.3 Standardized Mounting and fixing . 32G.3.1 Test specimens for EN ISO 11925-2 (Ignitability) and EN 13823 (SBI) . 32G.3.2 EN ISO 11925-2 (Ignitability) . 32

20、G.3.3 EN 13823 (SBI) . 32Annex H (normative) Rules for creating performance charts for loose-fill insulation and examples of performance charts . 33H.1 General . 33H.2 Performance chart for loft insulation 33H.3 Performance chart for masonry cavity wall insulation and frame constructions insulation

21、34Annex I (normative) Verification of performance chart according to Annex H (normative) 36I.1 Principle 36I.2 Procedure . 36Annex J (normative) Specimen preparation method for coverage and density measurement . 37J.1 Principle 37J.2 Procedure for ventilated roof space application 37J.3 Procedure fo

22、r closed construction 38Annex K (normative) Thermal insulating products for lofts - Determination of settlement for blown loose fill insulation. 39K.1 Principle 39K.2 Apparatus . 39K.3 Test specimens 39K.4 Test procedure . 39K.5 Calculations and expression of results 40K.6 Test report 40Annex L (inf

23、ormative) Masonry cavity walls - Method for determining suitable spacings for blowing holes . 42L.1 Test house 42L.2 Test method . 42L.3 Observations 42L.4 Installation procedure . 42Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Di

24、rective . 45ZA.1 Scope and relevant characteristics . 45BS EN 14064-1:2010EN 14064-1:2010 (E) 4 ZA.2 Procedures for attestation of conformity of in-situ formed loose-fill mineral wool (MW) products . 46ZA.2.1 Systems of attestation of conformity . 46ZA.2.2 EC certificate and declaration of conformit

25、y . 49ZA.3 CE Marking and labelling . 51Bibliography . 54BS EN 14064-1:2010EN 14064-1:2010 (E) 5 Foreword This document (EN 14064-1:2010) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard sh

26、all be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2010, and conflicting national standards shall be withdrawn at the latest by November 2011. Attention is drawn to the possibility that some of the elements of this do

27、cument may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirem

28、ents of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 14064, Thermal insulation products for buildings In-situ formed loose-fill mineral wool (MW) products, consists of two parts which form a package. The first part (

29、this European Standard), which is the harmonised part satisfying the mandate, the CPD and is the basis for the CE marking, covers the products, which are placed on the market. The second part, which is the non-harmonised part, covers the specification for the installed products. Both parts need to b

30、e used for the application of the insulation product in the end-use applications covered by EN 14064. This European Standard contains thirteen annexes: Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity Annex B (normative) Factory production contr

31、ol Annex C (normative) Specimen preparation for thermal resistance and thermal conductivity test Annex D (normative) Specimen preparation for water absorption test Annex E (normative) Specimen preparation for airflow resistivity test Annex F (normative) Testing for reaction to fire of products Annex

32、 G (normative) Testing for reaction to fire of products in standardised assemblies simulating end-use applications Annex H (normative) Rules for creating performance charts for loose-fill insulation and examples of performance charts Annex I (normative) Verification of performance chart according to

33、 Annex H (normative) Annex J (normative) Specimen preparation method for coverage measurement Annex K (normative) Thermal insulating products for lofts Determination of settlement for blown loose fill insulation Annex L (informative) Masonry cavity walls Method for determining suitable spacing for b

34、lowing holes BS EN 14064-1:2010EN 14064-1:2010 (E) 6 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive This European Standard is one of a series for mineral wool, expanded clay, expanded perlite, exfoliated vermiculite, polyu

35、rethane/polyisocyanurate, cellulose and bound expanded polystyrene in-situ formed insulation products used in buildings, but this standard may be used in other areas where appropriate. The reduction in energy used and emissions produced during the installed life of insulation products exceeds by far

36、 the energy used and emissions made during the production and disposal processes. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repub

37、lic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 14064-1:2010EN 14064-1:2010 (E) 7 1 Scope This

38、 European Standard specifies the requirements for blown loose-fill mineral wool products for in-situ installation in lofts, masonry cavity walls and frame constructions. This European standard is a specification for the insulation products before installation. It describes the product characteristic

39、s and includes procedures for testing, marking and labelling. This document does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations o

40、r non-conflicting standards. NOTE To avoid water penetration in masonry walls special tests adjusted to local climate might be needed. This document does not cover factory made mineral wool (MW) insulation products or in-situ products intended to be used for the insulation of building equipment and

41、industrial installations. Products with a declared thermal resistance lower than 0,25 m2K/W or a declared thermal conductivity greater than 0,060 W/(mK) at 10 C are not covered by this document. This document does not cover products intended for airborne sound insulation and for acoustic absorption

42、applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 823, Ther

43、mal insulating products for building applications Determination of thickness EN 1609:1996, Thermal insulating products for building applications Determination of short term water absorption by partial immersion EN 12667, Thermal performance of building materials and products Determination of thermal

44、 resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance EN 13172:2008, Thermal insulation products Evaluation of conformity EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using data fr

45、om reaction to fire tests EN 13820, Thermal insulating materials for building applications Determination of organic content EN 13823, Reaction to fire tests for building products Building products excluding floorings exposed to the thermal attack by a single burning item EN 15715:2009, Thermal insul

46、ation products Instructions for mounting and fixing for reaction to fire testing Factory made products EN 29053:1993, Acoustics Materials for acoustical applications Determination of air flow resistance (ISO 9053:1991) EN ISO 1182, Reaction to fire tests for building products Non-combustibility test

47、 (ISO 1182:2002) BS EN 14064-1:2010EN 14064-1:2010 (E) 8 EN ISO 1716, Reaction to fire tests for building products Determination of the heat of combustion (ISO 1716:2002) EN ISO 11925-2, Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 2: Single-

48、flame source test (ISO 11925-2:2002) 3 Terms, definitions, symbols and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 mineral wool insulation material having a woolly consistency, manufactured from molten rock, slag or glass 3.1.2 blowing hole hole, cut or formed, in a masonry cavity wall or frame construction, through which the mineral wool is bl