EN 14118-2-2003 en Reinforcement Specifications for textile glass mats (chopped strand and continuous filament mats) Part 2 Methods of test and general requirements《增强材料 玻璃丝毡(切短玻璃丝.pdf

1、BRITISH STANDARD BS EN 14118-2:2003 Reinforcement Specifications for textile glass mats (chopped strand and continuous filament mats) Part 2: Methods of test and general requirements The European Standard EN 14118-2:2003 has the status of a British Standard ICS 59.100.10 BS EN 14118-2:2003 This Brit

2、ish Standard was published under the authority of the Standards Policy and Strategy Committee on 20 February 2003 BSI 20 February 2003 ISBN 0 580 41293 8 National foreword This British Standard is the official English language version of EN 14118-2:2003. Together with BS EN 14118-1:2003 and BS EN 14

3、118-3:2003 this publication supersedes BS 3496:1989 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/42, Fibre reinforced thermosetting plastics and prepregs, which has the responsibility to: A list of organizations represented on this committee ca

4、n be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search”

5、facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obliga

6、tions. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of

7、 pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPE

8、ANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN141182 February2003 ICS59.100.10 Englishversion ReinforcementSpecificationsfortextileglassmats(chopped strandandcontinuousfilamentmats)Part2:Methodsoftest andgeneralrequirements RenfortSpcificationsdesmatsdeverretextile(mats filscoupsetmatsfilscontinus)Part

9、ie2:Mthodes dessaietexigencesgnrales VerstrkungsprodukteSpezifikationfrTextilglasmatten (GlasseidenundEndlosmatten)Teil2:Prfverfahrenund allgemeineAnforderungen ThisEuropeanStandardwasapprovedbyCENon28November2002. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatethecondi

10、tionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Ave

11、rsioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Hungary,Iceland,Ireland

12、,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,SwitzerlandandUn ited Kingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2003CEN Allrightsofexploitationinanyformandbyanymeansres

13、erved worldwideforCENnationalMembers. Ref.No.EN141182:2003EEN141182:2003(E) 2 Contents page Foreword3 1 Scope 4 2 Normativereferences 4 3 Termsanddefinitions . 4 4 Properties .5 5 Labelling,Packaging,Storageconditions 6EN141182:2003(E) 3 Foreword Thisdocument(EN141182:2003)hasbeenpreparedbyTechnical

14、CommitteeCEN/TC249“Plastics“, thesecretariatofwhichisheldbyIBN. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofan identicaltextorbyendorsement,atthelatestbyAugust2003,andconflictingnationalstandardsshall bewithdrawnatthelatestbyAugust2003. ThisstandardisonepartofEN

15、14118whichisstructuredasfollows: ReinforcementSpecificationsfortextileglassmats(choppedstrandandcontinuousfilament mats)Part1:Designation ReinforcementSpecificationsfortextileglassmats(choppedstrandandcontinuousfilament mats)Part2:Methodsoftestandgeneralrequirements ReinforcementSpecificationsfortex

16、tileglassmats(choppedstrandandcontinuousfilament mats)Part3:Specificrequirements AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthe followingcountriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic, Denmark,Finland,France,Germany,Greece,Hungary,

17、Iceland,Ireland,Italy,Luxembourg,Malta, Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,SwitzerlandandtheUnitedKingdom.EN141182:2003(E) 4 1Scope ThisEuropeanStandardprovidesthelistoftestmethodsandgeneralrequirementsforchoppedstrand andcontinuousfilamentmatscoveredbypart1. 2 Normativereferences Thi

18、sEuropeanStandardincorporatesbydatedorundatedreference,provisionsfromother publications.Thesenormativereferencesarecitedattheappropriateplacesinthetextandthe publicationsarelistedhereafter.Fordatedreferences,subsequentamendmentstoorrevisionsofany ofthesepublicationsapplytothisEuropeanStandardonlywhe

19、nincorporatedinitbyamendmentsor revision.Forundatedreferencesthelatesteditionofthepublicationreferredtoapplies(including amendments). EN141183:2003,ReinforcementSpecificationsfortextileglassmats(choppedstrandand continuousfilamentmats)Part3:Specificrequirements ENISO472:2001, PlasticsVocabulary(ISO4

20、72:1999). ENISO1043, PlasticsSymbolsandabbreviatedterms ENISO1889, ReinforcementyarnsDeterminationoflineardensity(ISO1889:1997) ENISO2078, TextileglassYarnsDesignation(ISO2078:1993) ENISO3344 ,ReinforcementproductsDeterminationofmoisturecontent(ISO3344:1997) ISO1887,TextileglassDeterminationofcombus

21、tiblemattercontent ISO2558, Textileglass choppedstrandmatsforreinforcementofplasticsDeterminationoftimeofdissolutionofthebinderin styrene ISO3342, TextileglassMatsDeterminationoftensilebreakingforce. ISO3374, ReinforcementproductsMatsandfabricsDeterminationofmassperunitarea. ISO3616,TextileglassChop

22、pedstrandandcontinuousfilamentmatsDeterminationofaverage thickness,thicknessunderloadandrecoveryaftercompression. ISO5025, ReinforcementproductsWovenfabricsDeterminationofwidth and length. 3 Termsanddefinitions ForthepurposesofthisEuropeanStandard,thetermsanddefinitionsgiveninENISO472:2001and thefol

23、lowingapply. 3.1 characteristicsproperties propertiesnotnormallysubjecttoplannedqualitycontrolinthematproductionprocess 3.2 controlledproperties quantitativepropertiesnormallysubjecttoplannedqualitycontrolinthematproductionprocess 3.3 visualproperties qualitativepropertiesnotnecessarilysubjecttoplan

24、nedqualitycontrolinthematproductionprocessEN141182:2003(E) 5 4Properties 4.1 Characteristicsproperties Property Mandatory Optional Testmethod Remark Glasstype all ENISO2078 a Strandlineardensity(tex) all ENISO1889 Bindertype all ENISO1043 a emulsionorpowdertype Recommendedmatrixcompatibility all / S

25、olubilityofthebinder thereare3degreesof solubility: instyrene(s) CSM ISO2558 high(200s) Thickness(mm) CFM ISO3616 Edgesoftheroll all / untrimmedortrimmed ononeorbothsides Nominallengthoftheroll(m) all 3piecesmaximumina roll;5mminimum lengthforeachpiece a givesdefinitionsandcodes,withouttestmethod. 4

26、.2 Controlledproperties Property Mandatory Optional Testmethod Remark massperunitarea(g/m 2 ) all ISO3374 combustiblematter(%) all ISO1887 itincludessizingand bindermaterialsand excludeswater tensilestrength(N) CSM ISO3342 moisturecontent(%) CSM ENISO3344 widthoftheroll(cm) all ISO5025 standardforwo

27、ven fabricsusedformats 4.3 Visualproperties Thematshallbeuniforminappearance.Therollshallbewoundwithappropriatecompactionandthe edgesalignedsothattelescopingdoesnotexceedagiventolerance(see5.3inpart3). Listedbelowareanumberofrecognisedvisiblenonconformitieswhichmayexistinamat,produced duringmanufact

28、ureorduringsubsequenthandling: tears ; holes ; dirtymarks;greasespots;darkstrands;foreignmatter; clumpsofstrandsorstripsofbinder; locallythinareas; poorlybondedareas;EN141182:2003(E) 6 irregular edges. 5 Labelling,Packaging,Storageconditions Eachrollofmatandeachpalletshallbearalabelprovidingthedatat

29、hatwillenablematerial traceability: manufacturersname; matdesignation(shortenedtocommercialname,massperunitarea,widthoftheroll); massoftheroll(net); manufacturersproductionandtraceabilityreferences; nominal lengthoftheroll(optional). Thepackagingshallprotecttheproductduringhandling,storageandtranspo

30、rtation.Toensuretothe materialitsoriginalpropertiesandaminimumshelflifeof12monthsthefollowingstorageconditions aretobemet.Directsunlightorheatsourcesmustbeavoided.Glassfibreproductmustbekeptdry. Theoptimalconditionsforstorageshallbeatatemperaturebetween10Cto35Candarelative humidityoflessthan85%.Toav

31、oidproblemswithhumidityorstaticelectricity,theglassfibreproduct shouldbeconditionedintheworkingareapriortouse.Ifthecontentofapackagingunitisonlypartly used,thepackagingshouldbeclosedagaintomaintaintheproductinitsoriginalpackaging.Afirst in/firstoutstockcontrolsystemisnotstrictlynecessarybutwillhelpt

32、ominimisetheinfluenceof adversestorageproblems.blankBS EN 14118-2:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international

33、level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would b

34、e grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individ

35、ual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001.

36、Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BS

37、I provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre

38、. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44

39、(0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all

40、BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means elec

41、tronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.