EN 14209-2017 en Preformed plasterboard cornices - Definitions requirements and test methods.pdf

1、Preformed plasterboard cornices Definitions, requirements and test methodsBS EN 14209:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14209 July 2017 ICS 91.100.10 Supersedes EN 14209:2005English Version Prefor

2、med plasterboard cornices - Definitions, requirements and test methods Corniches prformes en pltre revtues de carton - Dfinitions, exigences et mthodes dessai Hohlkehlleisten aus kartonummanteltem Gips - Begriffe, Anforderungen und Prfverfahren This European Standard was approved by CEN on 29 July 2

3、016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained

4、 on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CE

5、NELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, It

6、aly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Ce

7、ntre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14209:2017 ENational forewordThis British Standard is the UK implementation of EN 14209:2017. It supersedes BS EN 14209:2005, which is wit

8、hdrawn.The UK participation in its preparation was entrusted to Technical Committee B/544, Plastering, rendering, dry lining.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of

9、a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 92277 0ICS 91.100.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under t

10、he authority of the Standards Policy and Strategy Committee on 31 July 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 14209:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14209 July 2017 ICS 91.100.10 Supersedes EN 14209:2005English Version Prefo

11、rmed plasterboard cornices - Definitions, requirements and test methods Corniches prformes en pltre revtues de carton - Dfinitions, exigences et mthodes dessai Hohlkehlleisten aus kartonummanteltem Gips - Begriffe, Anforderungen und Prfverfahren This European Standard was approved by CEN on 29 July

12、2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtaine

13、d on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-C

14、ENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, I

15、taly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management C

16、entre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14209:2017 EBS EN 14209:2017EN 14209:2017 (E) 2 Contents Page European foreword . 3 Introduction 4 1 Scope 5 2 Normative references 5 3 T

17、erms and definitions, symbols and abbreviations . 5 3.1 Terms and definitions . 5 3.2 Symbols and abbreviations . 6 4 Requirements . 6 4.1 Reaction to fire . 6 4.2 Flexural strength (expressed as bending behaviour) 6 4.3 Dangerous substances . 7 4.4 Composition 7 4.5 Profile and dimensions . 7 5 Tes

18、t methods 8 5.1 Sampling . 8 5.2 Dimensional measurements . 8 5.3 Determination of accuracy of profile . 9 5.4 Determination of bending behaviour 9 6 Assessment and verification of constancy of performance AVCP 10 6.1 General . 10 6.2 Type testing 10 6.3 Factory production control (FPC) 11 7 Designa

19、tion of preformed plasterboard cornices 12 8 Marking, labelling and packaging 12 Annex A (informative) Sampling procedure for testing 13 A.1 General . 13 A.2 Sampling procedure 13 Annex B (normative) Mounting and fixing in the test according to EN 13823 (SBI test) 14 Annex ZA (informative) Relations

20、hip of this European Standard with Regulation (EU) No.305/2011 15 ZA.1 Scope and relevant characteristics 15 ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) 15 ZA.3 Assignment of AVCP tasks . 16 Bibliography . 18 BS EN 14209:2017EN 14209:2017 (E) 3 European foreword Thi

21、s document (EN 14209:2017) has been prepared by Technical Committee CEN/TC 241 “Gypsum and gypsum based products”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the

22、latest by January 2018, and conflicting national standards shall be withdrawn at the latest by April 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent ri

23、ghts. This document supersedes EN 14209:2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) No. 305/2011. For relationship with Regulation (EU) No. 305/2011, see

24、informative Annex ZA, which is an integral part of this document. The main technical changes that have been made in this new edition of EN 14209 are the following: a) normative references have been updated; b) new clause symbols and abbreviations has been introduced; c) Annex ZA and Clause 6 have be

25、en revised to be in line with the Construction Products Regulation (CPR); d) document has been editorially revised. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulg

26、aria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzer

27、land, Turkey and the United Kingdom. BS EN 14209:2017EN 14209:2017 (E) 4 Introduction Preformed plasterboard cornices are composed of gypsum plaster encased in and firmly bonded to strong durable paper liners in the shape of narrow lengths with various face profiles. The composition and finish is id

28、entical to that of gypsum plasterboard which makes them particularly suitable for use in situations where a compatible product is required to aesthetically enhance the junction between gypsum plasterboard lined or gypsum plastered walls and ceilings. As well as concealing unsightly cracks, they can

29、be used to provide a permanent and effective seal. They can also be used for decorative and acoustic purposes. Preformed plasterboard cornices are installed with gypsum adhesive or mechanically fixed and can be finished with direct surface decoration. BS EN 14209:2017EN 14209:2017 (E) 5 1 Scope This

30、 European Standard specifies the characteristics and performance of preformed plasterboard cornices intended to be used in building construction works either as part of the original specification or subsequently for improved decorative enrichment of the wall/ceiling angle in rooms. This standard cov

31、ers the performance characteristics: reaction to fire and flexural strength. This standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Construction Industry and the reference tests for these characteristics. It provides the

32、 assessment and verification of constancy of performance of the products. This standard does not cover plain plaster and gypsum fibrous plasterwork cornices. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its

33、 application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 520:2004+A1:2009, Gypsum plasterboards Definitions, requirements and test methods EN 13501-1:2007+A1:2009, Fire classificat

34、ion of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 13823:2010+A1:2014, Reaction to fire tests for building products Building products excluding floorings exposed to the thermal attack by a single burning item EN 14496:2017, Gypsum base

35、d adhesives for thermal/acoustic insulation composite panels and gypsum boards Definitions, requirements and test methods 3 Terms and definitions, symbols and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 plasterboard corn

36、ice preformed paper covered gypsum section with profiled face supported by shoulders 3.1.2 face exposed surface usually concave, or partially concave with further contours to add embellishment 3.1.3 edge boundary between the face and back angle which defines thickness (AC) Note 1 to entry: See Figur

37、e 1. 3.1.4 back angle return from edge, preset at a nominal 90 to facilitate positioning during application BS EN 14209:2017EN 14209:2017 (E) 6 3.1.5 end cut section of length 3.1.6 girth dimension measured indicating the projection of the profile at 90 (XC) Note 1 to entry: See Figure 1. Figure 1 E

38、xample of profile 3.2 Symbols and abbreviations Table 1 Symbols and abbreviations Requirement Sub-clause Symbol or abbreviation Reaction to fire 4.1 R2F Flexural strength 4.2 F Dangerous substances 4.3 DS 4 Requirements 4.1 Reaction to fire Where subject to regulatory requirements, preformed plaster

39、board cornices shall be tested and classified in accordance with EN 13501-1. Preformed plasterboard cornices tested according to EN 13823 (SBI test) shall be mounted and fixed in accordance with Annex B or when the manufacturer wishes to claim performance for a specific intended use, the mounting an

40、d fixing shall be representative of that intended use. 4.2 Flexural strength (expressed as bending behaviour) Individual lengths shall be capable of being handled and installed using recommended practice. When tested in accordance with 5.4, the cornice shall not fracture. BS EN 14209:2017EN 14209:20

41、17 (E) 7 4.3 Dangerous substances National regulations on dangerous substances may require verification and declaration on release, and sometimes content, when construction products covered by this standard are placed on those markets. In the absence of European harmonized test methods, verification

42、 and declaration on release/content should be done taking into account national provisions in the place of use. NOTE An informative database covering European and national provisions on dangerous substances is available at the Growth website on EUROPA accessed through: https:/ec.europa.eu/growth/too

43、ls-databases/cp-ds 4.4 Composition Preformed plasterboard cornices shall have constituents common to gypsum plasterboard to EN 520. The paper shall be suitable to receive decoration or be pre-finished. The abutting paper edges on the back of the cornice are, usually, concealed and secured by a self-

44、adhesive paper tape. The core may contain additives, aggregates and/or fibres. 4.5 Profile and dimensions 4.5.1 General Preformed plasterboard cornices are manufactured in a variety girths, lengths and profiles to the producers declared nominal dimensions. The lettering in the sub-clauses below refe

45、rs to Figure 1. 4.5.2 Profile Preformed plasterboard cornices shall be manufactured to provide a continuous section of regular profile and thickness to permit, subsequently, cut lengths to match their shape and thickness when ends are placed together. The ends shall be end finished, square and clean

46、 cut. 4.5.3 Face The face and edges shall be free from bumps, grooves, voids, blisters, burrs, scuffing and staining. The distance ED shall lie within the tolerance limits of 1 mm when checked in accordance with 5.3. a) minimum dimensions (“NOT GO”) b) maximum dimensions (“GO”) Figure 2 Silhouette t

47、emplate BS EN 14209:2017EN 14209:2017 (E) 8 4.5.4 Back angle The back angle (CXC) designed to facilitate positioning to the wall/ceiling angle shall be not less than 90 when checked in accordance with 5.3. 4.5.5 Side angle The side angle (DAC) shall be of the specified profile e.g. square, bevelled

48、or rounded when checked in accordance with 5.3. 4.5.6 Face width The face width of the product (AA) shall lie within the tolerance limits of 2 mm when checked in accordance with 5.3. 4.5.7 Thickness Thickness should be related to the constituents, composition and profile which combined shall provide

49、 the desired shape to facilitate handling and fixing. The main section (DF) shall have a minimum thickness of 9,5 mm and may require to be greater than that of section (AC) which shall have a minimum thickness of 5,5 mm when measured in accordance with 5.2.1. 4.5.8 Length The length shall be measured in accordance with 5.2.2 and compared with the nominal length. The deviations shall be200+mm. 4.5.9 Squareness and integrity of ends The sections shall be end-finished, square and clean cut. 5 Test methods 5.1 Sampling A minimum of three