1、BRITISH STANDARD BS EN 14225-3:2005 Diving Suits Part 3: Actively heated or cooled suits (systems) Requirements and test methods The European Standard EN 14225-3:2005 has the status of a British Standard ICS 97.220.40 BS EN 14225-3:2005 This British Standard was published under the authority of the
2、Standards Policy and Strategy Committee on 18 April 2005 BSI 18 April 2005 ISBN 0 580 45861 X National foreword This British Standard is the official English language version of EN 14225-3:2005. The UK participation in its preparation was entrusted by Technical Committee PH/3, Protective clothing, t
3、o Subcommittee PH/3/6/2, Diving suits, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may
4、 be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users a
5、re responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, an
6、d keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 28, an inside back cover and a back cover. The BSI copyright notice di
7、splayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN142253 March2005 ICS97.220.40 Englishversion DivingsuitsPart3:Activelyheatedorcooledsuits(systems) Requirementsandtestmetho
8、ds VtementsdeplongePartie3:Vtementsavecsystme dechauffageouderefroidissementactif(ensembles) Prescriptionsetmthodesdessai TauchanzgeTeil3:AktivbeheizteodergekhlteAnzge (Systeme)AnforderungenundPrfverfahren ThisEuropeanStandardwasapprovedbyCENon14February2005. CENmembersareboundtocomplywiththeCEN/CEN
9、ELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsint
10、hreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmar
11、k,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG Manage
12、mentCentre:ruedeStassart,36B1050Brussels 2005CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN142253:2005:EEN 14225-3:2005 (E) 2 Contents Page Foreword3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Requirements.7 4.
13、1 General7 4.2 Mechanical performance of the whole suit .7 4.3 Mechanical performance of the material, seams and attachments8 4.4 Mechanical performance of underwear material 10 4.5 Construction.10 4.6 Thermal requirements .11 4.7 Special safety requirements for electrical systems.11 4.8 Practical p
14、erformance requirements .11 4.9 Optional features .12 5 Test methods13 5.1 General13 5.2 Test sequence13 5.3 Visual inspection .14 5.4 Leakage test for dry suits .14 5.5 Cold and hot storage and inflation resistance test14 5.6 Sea water resistance test16 5.7 Cleaning, disinfection and decontaminatio
15、n 16 5.8 Active system functional test.16 5.9 Pull test of connectors 16 5.10 Practical performance test16 5.11 Testing optional features 20 6 Marking .21 7 Information to be supplied by the manufacturer22 7.1 Information to be supplied with the suit .22 7.2 Customer information to be supplied at th
16、e point of sale.22 7.3 Instructions for use .22 Annex A (normative) Ratings of practical performance, thermal comfort and perceived exertion 24 A.1 Practical Performance: Scale .24 A.2 Thermal Comfort: Scale and Questionnaire .24 A.3 Perceived Exertion: Scale and Questionnaire 24 Annex ZA (informati
17、ve) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC26 Bibliography 28 EN 14225-3:2005 (E) 3 Foreword This document (EN 14225-3:2005) has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and li
18、fejackets”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2005, and conflicting national standards shall be withdrawn at the latest by Septembe
19、r 2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/686/EEC. For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
20、document. This standard for actively heated suits or actively cooled diving suits (Systems) is Part 3 of 4. The other parts are: - Diving Suits Part 1: Wet suits Requirements and test methods. - Diving Suits Part 2: Dry suits Requirements and test methods. - Diving Suits Part 4: One atmosphere suits
21、 (ADS) Human factors requirements and test methods. This document includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denma
22、rk, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 14225-3:2005 (E) 4 Introduction This document for actively heated or coo
23、led diving suits (systems) has been prepared to meet the needs of persons engaged in underwater activities where the user is breathing underwater, and where the water temperature and exposure duration are such that the persons thermal status only can be maintained at a safe level by means of active
24、heating or cooling. Actively heated suits and actively cooled suits are designed to reduce the risk of the diver suffering hypothermia and hyperthermia, respectively. The performance of the suit can be altered by a number of factors including any additional equipment carried by the diver. A suit may
25、 be comprised of one or more pieces. EN 14225-3:2005 (E) 5 1 Scope This document specifies the construction and performance of actively heated suits and actively cooled suits for wear by divers for underwater activities where the user is breathing underwater. Marking, labelling, information to be pr
26、ovided at the point of sale, and instructions for use are also specified. The document applies to the actively heated or cooled suits (systems) of the two types, dry and wet. It is only required that the suit should fulfil this Part 3, not the Parts 1 or 2 unless specified. Laboratory and practical
27、performance tests are specified. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) ap
28、plies. EN 250:2000, Respiratory equipment Open circuit self-contained compressed air diving apparatus Requirements, testing marking EN 340:2003, Protective clothing General requirements EN 1809:1997, Diving accessories Buoyancy compensators Functional and safety requirements, test methods EN 14126:2
29、003, Protective clothing Performance requirements and test methods for protective clothing against infective agents EN 14225-2:2005, Diving suits Part 2: Dry suits Requirements and test methods EN 23758:1993, Textiles Care labelling code using symbols (ISO 3758:1991) EN ISO 105-E02:1996, Textiles Te
30、sts for colour fastness Part E02: Colour fastness to sea water (ISO 105-E02:1994) EN ISO 105-X12:2002, Textiles Tests for colour fastness Part X12: Color fastness to rubbing (ISO 105- X12:2001) EN ISO 4674-2:1998, Rubber- or plastic-coated fabrics Determination of tear resistance Part 2: Ballistic p
31、endulum method (ISO 4674-2:1998) EN ISO 6529:2001, Protective clothing Protection against chemicals Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001) EN ISO 13935-2:1999, Textiles Seam tensile properties of fabrics and made-up textile art
32、icles Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:1999) EN ISO 15027-3:2002, Immersion suits Part 3: Test methods (ISO 15027-3:2002) ISO 105-A02:1993, Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour AODC:1985, Code
33、of practice for safe use of electricity under water (http:/www.imca- ) SOLAS:1974, as amended, Chapter III as amended by IMO Resolution MSC 47(66) and LSA Code. Recommendation on retroreflective tapes on life-saving appliances adopted by Res. A.658(16), Annex 2 EN 14225-3:2005 (E) 6 3 Terms and defi
34、nitions For the purposes of this document, the following terms and definitions apply. 3.1 actively heated suit suit designated to provide heat to the layer of gas or water between the suit and the divers body 3.2 actively cooled suit suit designated to remove heat from the layer of gas or water betw
35、een the suit and the divers body 3.3 connector connecting device between the suits internal distribution system and the umbilical delivering electricity and/or heating/cooling gas/liquid from an external source 3.4 diving environment environment in which the wearer of a diving suit engages in diving
36、 activities 3.5 diving suit suit designed for intended underwater activities, in which the user is breathing underwater 3.6 dry suit diving suit, which covers all or particular regions of the body and which is designed to prevent the ingress of water upon immersion 3.7 heat stress physiological stre
37、ss produced by the heat load on the body NOTE The total heat load is made up of the metabolic heat load and environmental heat loads including that due to clothing. 3.8 hypothermia condition of the human body in which the core temperature is below 35 C 3.9 hyperthermia condition of the human body in
38、 which the core temperature is above 39 C 3.10 suit system combination of diving suit components, undergarments and attachments 3.11 wet suit diving suit, made of thermal insulating material, which covers all or part of the body and that is designed to reduce the flow of the water around the divers
39、body 3.12 umbilical hose or cable system for transferring energy and other services to or from an actively heated or actively cooled suit EN 14225-3:2005 (E) 7 3.13 undergarment garment worn under the diving suit to provide one or more of insulation mechanical protection or thermal control 3.14 risk
40、 likelihood that the harm or damage from a particular hazard is realised NOTE Risk reflects both the likelihood and consequence of the hazard. S L R = where R = Risk L = Likelihood to be exposed to the hazard S = Severity/Consequence if exposed to hazard 3.15 single action release mechanism mechanis
41、m, which can be released with one hand 4 Requirements 4.1 General Actively heated and cooled suits (systems) shall conform to the requirements listed in Table 1, as applicable. Actively heated and cooled suits (systems) incorporating optional features shall also conform to the requirements listed in
42、 Table 2, as applicable. The requirements are for both types of suits (wet and dry) unless otherwise specified. 4.2 Mechanical performance of the whole suit 4.2.1 Resistance to cold and hot storage and inflation Applicable only for dry suits. After the leakage test (5.4) a suit, complete with all at
43、tachments including valves and hose, shall be subjected to hot and cold storage followed by an inflation resistance test, in accordance with 5.5. After each hot and cold storage cycle and after the inflation resistance test the suit shall be visually inspected in accordance with 5.3. There shall be
44、no visible signs of damage. Applicable only for wet suits. A suit and samples of each suit material and each suit material combination shall be subjected to a high temperature resistance test followed by a low temperature resistance test as given in 5.5 and repeated four cycles. The suit and the sam
45、ples shall then be inspected in accordance with 5.3. There shall be no visible signs of damage. 4.2.2 Sea water resistance After the test for resistance to hot and cold storage (5.5), the suit, complete with all attachments including valves and hose, and the samples of suit materials shall be subjec
46、ted to the seawater resistance test in accordance with 5.6 and then visually inspected after each cycle in accordance with 5.3. There shall be no visible signs of damage. EN 14225-3:2005 (E) 8 4.2.3 Resistance to cleaning, disinfection and decontamination The suits, complete with all attachments and
47、 the samples of suit materials and of each material combination shall be subjected to cleaning and disinfection and, where applicable, to decontamination in accordance with 5.7 and shall then be visually inspected in accordance with 5.3. There shall be no visible signs of damage or degradation. 4.3
48、Mechanical performance of the material, seams and attachments 4.3.1 Resistance of material to puncture and dynamic tearing Following preliminary tests of resistance to cold and hot storage (5.5), seawater resistance (5.6) and resistance to cleaning, disinfection and decontamination (5.7) the suit material samples shall be tested in accordance with EN 14225-2:2005, 5.4.3.1 the mean tear length shall be less than 40 mm. 4.3.2 Strength of suit seams Whe
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1