ImageVerifierCode 换一换
格式:PDF , 页数:14 ,大小:608.46KB ,
资源ID:708899      下载积分:10000 积分
快捷下载
登录下载
邮箱/手机:
温馨提示:
快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。 如填写123,账号就是123,密码也是123。
特别说明:
请自助下载,系统不会自动发送文件的哦; 如果您已付费,想二次下载,请登录后访问:我的下载记录
支付方式: 支付宝扫码支付 微信扫码支付   
验证码:   换一换

加入VIP,免费下载
 

温馨提示:由于个人手机设置不同,如果发现不能下载,请复制以下地址【http://www.mydoc123.com/d-708899.html】到电脑端继续下载(重复下载不扣费)。

已注册用户请登录:
账号:
密码:
验证码:   换一换
  忘记密码?
三方登录: 微信登录  

下载须知

1: 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。
2: 试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。
3: 文件的所有权益归上传用户所有。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 本站仅提供交流平台,并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

版权提示 | 免责声明

本文(EN 14278-1-2004 en Textiles - Determination of cotton fibre stickiness - Part 1 Method using a manual thermodetection device《纺织品 棉纤维黏性的测定 第1部分 使用手工热检测设备的方法》.pdf)为本站会员(progressking105)主动上传,麦多课文库仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文库(发送邮件至master@mydoc123.com或直接QQ联系客服),我们立即给予删除!

EN 14278-1-2004 en Textiles - Determination of cotton fibre stickiness - Part 1 Method using a manual thermodetection device《纺织品 棉纤维黏性的测定 第1部分 使用手工热检测设备的方法》.pdf

1、BRITISH STANDARD BS EN 14278-1:2004 Textiles Determination of cotton fibre stickiness Part 1: Method using a manual thermodetection device The European Standard EN 14278-1:2004 has the status of a British Standard ICS 59.060.10 BS EN 14278-1:2004 This British Standard, was published under the author

2、ity of the Standards Policy and Strategy Committee on 8 February 2005 BSI 8 February 2005 ISBN 0 580 45392 8 National foreword This British Standard is the official English language version of EN 14278-1:2004. The UK participation in its preparation was entrusted to Technical Committee TCI/,24, Text

3、iles Physical testing, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BS

4、I Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for

5、its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK inter

6、ests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 11 and a back cover. The BSI copyright notice displayed in this document indicates when t

7、he document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN142781 May2004 ICS59.060.10 Englishversion TextilesDeterminationofcottonfibrestickinessPart1: Methodusingamanualthermodetectiondevice TextilesDeterminationducollage

8、desfibresdecoton Partie1:Mthodeutilisantundispositifmanuelde thermodtection TextilienBewertungderKlebrigkeitvonBauwolleTeil 1:VerfahrenmitdemmanuellenThermodetektionsgert ThisEuropeanStandardwasapprovedbyCENon23February2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipula

9、tetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French

10、,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,G

11、reece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Bru

12、ssels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN142781:2004:EEN 14278-1:2004 (E) 2 Contents Page Foreword3 Introduction .4 1 Scope5 2 Normative references5 3 Terms and definitions .5 4 Principle5 5 Apparatus.6 6 Atmosphere for conditioning

13、 and testing .8 7 Preparation of test specimens .8 8 Procedure.9 9 Calculation and expression of results.10 10 Test report10 Annex A (informative) Statistical analysis11 EN 14278-1:2004 (E) 3 Foreword This document (EN 14278-1:2004) has been prepared by Technical Committee CEN/TC 248 “Textiles and t

14、extile products”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2004, and conflicting national standards shall be withdrawn at the latest by Nov

15、ember 2004. Annex A is informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,

16、 Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 14278-1:2004 (E) 4 Introduction The aim of this method is to determine the stickiness potential of cotton fibres by simulating

17、the negative effects of this characteristic during the spinning process. Origins of stickiness are not studied. Results of this method are not directly related to the determination of sugar content. This standard consists of the following methods, under the general title “Textiles - Determination of

18、 cotton fibre stickiness“: Part 1: Method using a manual thermodetection device Part 2: Method using an automatic thermodetection plate device Part 3: Method using an automatic rotating drum device EN 14278-1:2004 (E) 5 1 Scope The standard describes a manual technique to simulate the tendency of co

19、tton fibres to stick to textile working surfaces. Test specimens can be raw cotton fibre (fibre sampled e.g. from a bale), or opened fibre, slivers, etc. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative refe

20、rences are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the

21、 latest edition of the publication referred to applies (including amendments). EN 20139 Textiles - Standard atmospheres for conditioning and testing (ISO 139:1973) 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 3.1 stickiness level numb

22、er of sticky points indicating the incidence of cotton fibre stickiness 3.2 thermodetection action of revealing sticky points through the combined application of heat and pressure 3.3 sticky points entanglement of fibres or individual fibres that are attached to a working surface as a result of the

23、inherent stickiness of the cotton 3.4 ensemble upper and lower aluminium foils enclosing a fibre sample 3.5 remover device to take away the non sticking fibres from the counting surface 4 Principle A fibre web, whose surface area and mass are fixed, is placed between two sheets of aluminium foil and

24、 pressed at two pressure levels applied successively at different temperature settings to reveal sticky points. The sticky points are then counted to evaluate the level of stickiness. EN 14278-1:2004 (E) 6 5 Apparatus 5.1 Manual thermodetection device A manual thermodetection device comprises: NOTE

25、The test method has been developed from practice where values of the major parameters (i.e. applied forces, surface area, temperature and time) have been fixed. Deviation from these values could influence the results. a) one rectangular lower (e.g. wooden or other material with similar thermal insul

26、ating characteristics) board covered with a copper-plated aluminium platen whose surface area is at least 640 mm x 220 mm; b) one rectangular heating plate with dimensions of (640 5) mm x (280 5) mm. Ensure that a force of (780 50) N is evenly distributed on the ensemble. The temperature is set at (

27、84 4)C using an electronic regulator. c) one rectangular upper (e.g. wooden) board, with dimensions of (640 5) mm x (220 5) mm. Ensure that a force of (590 50) N is evenly distributed on the preparation. The devices to apply forces and temperature shall be securely located to ensure even pressure di

28、stribution on the specimen. 5.2 Aluminium foil A sheet of aluminium of minimum width 250 mm, with a thickness of (15 5) um or a mass of (40 13,5) g/m, having at least one matt surface showing no traces of oxidation. EN 14278-1:2004 (E) 7 5.3 Electromechanical opener and accessories Comprising: a) A

29、rotating cylinder covered by a flexible card clothing : wires with a density of 8 teeth per cm (also expressed generally as “50 teeth per square inch“), having a length of 11 mm with angles of 12/30 (Figure 1) and diameter of 0,5 mm, a feeding plate and feeding cylinder. 1 = 12 = 30 1 = Pin Figure 1

30、 - Electromechanical opener and accessories b) The rotating cylinder width and diameter are calculated to obtain a fibre web whose dimensions are (540 20) mm (160 20) mm. c) The feeding cylinder diameter is (35 1) mm. d) The speed of the rotating cylinder is (50 25) r/min. e) Gear ratio between rota

31、ting cylinder and feeding cylinder is of 40/1 to 41/1. NOTE A rotating cylinder (without card clothing) with a diameter of (155 1) mm and a width of (200 1) mm has been found suitable. The feeding table width is (164 1) mm. 5.4 Accessories a) A knitting needle of minimum length 200 mm to extract the

32、 fibre web. b) A brush to clean the flexible card wire clothing of the electromechanical opener. EN 14278-1:2004 (E) 8 5.5 Remover The remover width is (230 10) mm. The cleaner mass is (400 20) g. The remover is covered with a nonwoven fabric to cause the removal of non-sticky fibres. NOTE A non-wov

33、en fabric impregnated with a mineral oil (about 10 %) has been found suitable. The shape and geometry of the cleaner are chosen such that no pressure is exerted during cleaning (see 8.6). 5.6 Light source White light source, whose nominal power is (110 10) W, with 30 geometry, so that oblique light

34、illuminates all of the surface area of the aluminium foil. 5.7 Fan A means of blowing a current of air across the surface of the aluminium foil to vibrate adhering fibres. 6 Atmosphere for conditioning and testing The atmosphere for conditioning and testing as defined in EN 20139 shall be used. 7 Pr

35、eparation of test specimens 7.1 General Condition the cotton fibre samples for at least 24 h in the atmosphere specified in clause 6. Prepare three test specimens picking fibre tufts randomly from the laboratory sample. The weight of the fibre test specimen shall be (2,5 0,05) g. 7.2 Electromechanic

36、al opener Clean the card wire cloth using the brush. Open and mix a conditioned fibre sample by hand, to obtain an homogenous pad. Place the sample on the feeding plate of the electromechanical opener. Run the opener to create an homogeneous cotton fibre web on the rotating cylinder. When the rotati

37、ng cylinder stops, use the needle to extract the fibre web. Take one end of the web with one hand (or a folded paper) and remove it carefully from the card wire clothing by pulling it while manually turning the rotating cylinder with the handle, avoiding deformation of the fibre web. The web should

38、be directly laid down on the aluminium foil. The web specimen obtained should be (540 20) mm (160 20) mm. In the case of an alternative specimen preparation method (for instance, sampling from a card web), the specimen should have a mass of (29,5 4) g/m. EN 14278-1:2004 (E) 9 8 Procedure 8.1 Thermod

39、etector set-up Set the hotplate in order to obtain a temperature of (84 4) C across its entire surface. During the heating, place the hot plate over the copper plated aluminium platen but do not secure. 8.2 Specimen positioning on the copper plated aluminium platen Cut an aluminium foil of appropria

40、te length to cover the copper plated aluminium platen. Place it on the platen, presenting its matt face upwards. Place the fibre web specimen on the aluminium foil. Cover the specimen with a second aluminium foil of appropriate length, having its matt face against the specimen. Avoid placing fingert

41、ips on the matt faces of the aluminium foils. 8.3 Heating phase of the test Position the heating plate over the ensemble and block securely. Apply pressure of (780 50) N and maintain a temperature of (84 4) C. Maintain this phase for (12 2) s. 8.4 Ambient phase of the test Unsecure the heating plate

42、 and remove from the ensemble. Immediately secure the upper (e.g. wooden) board and apply a pressure of (590 50) N to the ensemble for (120 10) s. 8.5 Removal of the ensemble Unsecure the upper (e.g. wooden) board. Remove the ensemble and allow to rest for at least (60 5) min. 8.6 Counting the stick

43、y points Carefully remove the upper aluminium foil. Lay it down with the matt face upwards. Without exerting any pressure, apply the cleaner to the lower aluminium foil along its length first in one direction and then in the other direction. Illuminate the lower aluminium foil with the oblique light

44、 source. Light may be applied from any side. Vibrate the adhering fibres using the fan. Count and record the sticky points. Repeat the process for the upper aluminium foil, but apply the cleaner in one direction only. NOTE It is recommended that the sticky points which have already been counted are

45、marked with an adapted pen. This avoids double, or the omission of, counting and allows a later verification without the application of the light source or fan. 8.7 Repetition Repeat the entire procedure from 8.1 to 8.6 with two additional test specimens from the same sample. EN 14278-1:2004 (E) 10

46、9 Calculation and expression of results Add the number of sticky points recorded from the upper or lower aluminium foils for each test specimen. Average the results of the three test specimens. 10 Test report 10.1 General information The report shall contain the following information: a) Reference t

47、o this European Standard. b) Identification of test sample, and sampling procedure if required. c) Any deviation from the given procedure. 10.2 Test results a) Total number of sticky points for each test specimen. b) The average result of the three test specimens. EN 14278-1:2004 (E) 11 Annex A (inf

48、ormative) Statistical analysis A.1 Statistical analysis For research purposes, statistical treatments of the data are generally necessary to determine possible differences between two groups of results. The statistical analysis of the number of sticky points shows that their distribution is not Normal / Gaussian and is more like a Poisson or a negative binomial distribution. Thus, variance increases with the number of sticky points, and its stabilisation is necessary prior to

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1