EN 14304-2009 1875 Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification (Incorpor.pdf

1、BS EN 14304:2009ICS 91.100.60NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDThermal insulationproducts for buildingequipment andindustrial installations Factory madeflexible elastomericfoam (FEF) products SpecificationCopyright European Committee for Standardiz

2、ation Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 May2010. BSI 2010ISBN 978 0 580 53416 4Amendments/corrigenda issued

3、since publicationDate CommentsBS EN 14304:2009National forewordThis British Standard is the UK implementation of EN 14304:2009.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/72, Rigid cellular materials.A list of organizations represented on this committee can be obt

4、ained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Copyright European Committee for Standardization

5、Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14304:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14304 November 2009 ICS 91.100.60 English Version Thermal insulation products for building equipment and indus

6、trial installations - Factory made flexible elastomeric foam (FEF) products - Specification Produits isolants thermiques pour lquipement du btiment et les installations industrielles - Produits manufacturs en mousse lastomre flexible (FEF) - Spcification Wrmedmmstoffe fr die technische Gebudeausrstu

7、ng und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus flexiblem Elastomerschaum (FEF) - Spezifikation This European Standard was approved by CEN on 29 September 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the con

8、ditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in th

9、ree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of

10、 Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN

11、 COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14304:2009: ECopyright European

12、Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14304:2009EN 14304:2009 (E) 2 Contents Page Foreword 31 Scope 52 Normative references 53 Terms, definitions, symbols, units and abbreviated ter

13、ms .74 Requirements .95 Test methods . 146 Designation code 177 Evaluation of conformity 188 Marking and labelling . 18Annex A (normative) Factory production control . 20Annex B (normative) Determination of minimum service temperature 22Annex C (normative) Thermal conductivity measurement 25Annex D

14、(informative) Additional properties . 26Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive 28Bibliography . 37Figures Figure ZA.1 Example of CE marking information 36Tables Table 1 Dimensional tolerances 11 Table 2 Test method

15、s, specimens and conditions 15 Table A.1 Minimum product testing frequencies . 20 Table A.2 Minimum product testing frequencies for the reaction to fire characteristics 21 Table D.1 Test methods, specimens and conditions 27 Table ZA.1 Relevant clauses 29 Table ZA.2 System(s) of attestation of confor

16、mity 31 Table ZA.3 Assignment of evaluation of conformity tasks for products under system 1 . 32 Table ZA.4 Assignment of evaluation of conformity tasks for products under system 3 or system 3 combined with system 4 for reaction to fire 33 Copyright European Committee for Standardization Provided by

17、 IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14304:2009EN 14304:2009 (E) 3 Foreword This document (EN 14304:2009) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of

18、which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by August 2011. Attention is drawn to the possib

19、ility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade As

20、sociation, and supports essential requirements of EU Directive 89/106/EEC. For relationship with EU Directive 89/106/EEC, see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting entities, who are bound by EU Directives to specify their re

21、quirements using European harmonized product standards, are allowed to demand additional properties outside the provisions of this standard if this is technically necessary because of prevailing operational conditions of the building equipment or the industrial installation projected or because of s

22、afety regulations. This European Standard contains five annexes: Annex A (normative), Factory production control Annex B (normative), Determination of minimum service temperature Annex C (normative), Thermal conductivity measurement Annex D (informative), Additional properties Annex ZA (informative)

23、, Clauses of this European Standard addressing the provisions of the EU Construction Products Directive This document includes a bibliography. This European Standard is one of a series of standards for insulation products used in building equipment and industrial installations, but this standard can

24、 be used in other areas, where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of standards, setting (21 months after availability) as the date of withdrawal (dow) of national standards which conflict with

25、the European standards of this package. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 14303, Thermal insulation products for building equipment a

26、nd industrial installations Factory made mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equipment and industrial installations Factory made flexible elastomeric foam (FEF) products Specification Copyright European Committee for Standardization Provided by

27、 IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14304:2009EN 14304:2009 (E) 4 EN 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306

28、, Thermal insulation products for building equipment and industrial installations Factory made calcium silicate (CS) products Specification EN 14307,Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN

29、14308, Thermal insulation products for building equipment and industrial installations Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made products of

30、expanded polystyrene (EPS) Specification EN 14313, Thermal insulation products for building equipment and industrial installations Factory made polyethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenol

31、ic foam (PF) products Specification According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece

32、, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo rep

33、roduction or networking permitted without license from IHS-,-,-BS EN 14304:2009EN 14304:2009 (E) 5 1 Scope This European Standard specifies the requirements for factory made flexible elastomeric foam products which are used for the thermal insulation of building equipment and industrial installation

34、s with an operating temperature in the range of approximately - 200 C to + 175 C. NOTE Below an operating temperature of - 50 C, tests regarding the suitability of the products in the intended application shall be performed. Manufacturers advice should be heeded in all cases. The products are manufa

35、ctured in the form of sheets, tubes, rolls and tapes with or without coating and/or self-adhesive backing and/or different closure systems. This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered

36、by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This European Standard does not specify the required level of a given property that shall be achieved by a product to demonstrate f

37、itness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,050 W/(mK) at 10 C are not covered by this standard. This European Standard does not cover p

38、roducts for the insulation of the building structure. The normative part of this standard does not cover compressive stress (see Annex D, D.5). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cit

39、ed applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickne

40、ss EN 824, Thermal insulating products for building applications Determination of squareness EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1609, Thermal insulating products for building app

41、lications Determination of short term water absorption by partial immersion EN 12085, Thermal insulating products for building applications Determination of linear dimensions of test specimens EN 12086, Thermal insulating products for building applications Determination of water vapour transmission

42、properties EN 12667, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance Copyright European Committee for Standardization Provided by IHS under license with

43、 CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14304:2009EN 14304:2009 (E) 6 EN 12939, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Thick products of

44、high and medium thermal resistance EN 13172, Thermal insulating products Evaluation of conformity EN 13467, Thermal insulating products for building equipment and industrial installations Determination of dimensions, squareness and linearity of preformed pipe insulation EN 13468, Thermal insulating

45、products for building equipment and industrial installations Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH EN 13469, Thermal insulating products for building equipment and industrial installations Determination of water vapour transmission proper

46、ties of preformed pipe insulation EN 13472, Thermal insulating products for building equipment and industrial installations Determination of short term water absorption by partial immersion of preformed pipe insulation EN 13501-1, Fire classification of construction products and building elements Pa

47、rt 1: Classification using test data from reaction to fire test EN 13823, Reaction to fire tests for building products Building products excluding flooring exposed to the thermal attack by a single burning item EN 14366:2004, Laboratory measurement of noise from waste water installations EN 14706, T

48、hermal insulating products for building equipment and industrial installations Determination of maximum service temperature EN 14707, Thermal insulating products for building equipment and industrial installations Determination of maximum service temperature for preformed pipe insulation EN 15715:2009, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products EN ISO 354, Acoustics Measurement of sound absorption in a reverberation room (ISO