EN 14304-2015 en Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification《应用于建筑设备和工业设.pdf

1、BSI Standards PublicationBS EN 14304:2015Thermal insulation productsfor building equipmentand industrial installations Factory made flexibleelastomeric foam (FEF)products SpecificationBS EN 14304:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 14304:2015. I

2、t supersedes BS EN 14304:2009+A1:2013 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This

3、 publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 88444 3 ICS 91.100.60 Compliance with a British Standard cannot confer

4、immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 14304:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14

5、304 December 2015 ICS 91.100.60 Supersedes EN 14304:2009+A1:2013English Version Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification Produits isolants thermiques pour lquipement du btiment et les insta

6、llations industrielles - Produits manufacturs en mousse lastomre flexible (FEF) - Spcification Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus flexiblem Elastomerschaum (FEF) - Spezifikation This European Standard

7、 was approved by CEN on 24 October 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning suc

8、h national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own

9、 language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, G

10、reece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUN

11、G CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14304:2015 EBS EN 14304:2015EN 14304:2015 (E) 2 Contents Page European foreword . 4 1 Scope 6 2 Normative refer

12、ences 6 3 Terms, definitions, symbols, units and abbreviated terms . 8 3.1 Terms and definitions . 8 3.1.1 Terms and definitions as given in EN ISO 9229:2007 8 3.1.2 Additional terms and definitions 8 3.2 Symbols, units and abbreviated terms 9 3.2.1 Symbols and units used in this standard 9 3.2.2 Ab

13、breviated terms used in this standard 10 4 Requirements 10 4.1 General . 10 4.2 For all applications 10 4.2.1 Thermal conductivity . 10 4.2.2 Dimensions and tolerances 11 4.2.3 Dimensional stability 12 4.2.4 Reaction to fire of the product as placed on the market 12 4.2.5 Durability characteristics

14、. 12 4.3 For specific applications 13 4.3.1 General . 13 4.3.2 Maximum service temperature . 13 4.3.3 Minimum service temperature . 13 4.3.4 Water absorption . 14 4.3.5 Water vapour diffusion resistance 14 4.3.6 Trace quantities of water soluble ions and the pH-value 14 4.3.7 Structure-borne sound t

15、ransmission . 14 4.3.8 Sound absorption . 14 4.3.9 Release of dangerous substances . 15 4.3.10 Continuous glowing combustion 15 5 Test methods . 15 5.1 Sampling 15 5.2 Conditioning . 15 5.3 Testing 15 5.3.1 General . 15 5.3.2 Thermal conductivity . 17 5.3.3 Reaction to fire 18 6 Designation code 18

16、7 Assessment and Verification of the Constancy of Performance (AVCP) . 19 7.1 General . 19 7.2 Product Type Determination (PTD) 19 7.3 Factory Production Control (FPC) 19 8 Marking and labelling . 19 Annex A (normative) Factory production control . 21 Annex B (normative) Determination of minimum ser

17、vice temperature 23 BS EN 14304:2015EN 14304:2015 (E) 3 B.1 Definitions . 23 B.2 Principle . 23 B.3 Apparatus 23 B.4 Test specimens 23 B.5 Procedure 24 B.6 Calculation and expression of results . 24 B.7 Test report 25 Annex C (normative) Thermal conductivity measurement 26 Annex D (informative) Addi

18、tional properties . 27 D.1 General . 27 D.2 Water vapour diffusion resistance . 27 D.3 Fire resistance of penetrations 27 D.4 Density 27 D.5 Compressive Strength . 28 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 29 ZA

19、.1 Scope and relevant characteristics 29 ZA.2 Procedures for AVCP of factory made flexible elastomeric foam (FEF) products . 31 ZA.3 CE Marking and labelling . 37 Bibliography . 39 BS EN 14304:2015EN 14304:2015 (E) 4 European foreword This document (EN 14304:2015) has been prepared by Technical Comm

20、ittee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards

21、shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14304:

22、2009+A1:2013. This document is identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The main technical changes that have been made in this new edition of EN 14304 are the following: a) an addition to t

23、he foreword; b) an addition in Clause 3; c) a new 4.3.9; d) modification of 5.3.2; e) modification of Clause 7; f) modification of Clause 8; g) modification of Annex A; h) a new Annex ZA. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Tr

24、ade Association, and supports essential requirements of Regulation (EU) No. 305/2011. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting entities, who are bound by EU Directives to

25、specify their requirements using European harmonized product standards, are allowed to demand additional properties outside the provisions of this standard if this is technically necessary because of prevailing operational conditions of the building equipment or the industrial installation projected

26、 or because of safety regulations. This European Standard contains five annexes: Annex A (normative), Factory production control; Annex B (normative), Determination of minimum service temperature; Annex C (normative), Thermal conductivity measurement; BS EN 14304:2015EN 14304:2015 (E) 5 Annex D (inf

27、ormative), Additional properties; Annex ZA (informative), Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation. This document includes a bibliography. This European Standard is one of a series of standards for insulation products used in building equ

28、ipment and industrial installations, but this standard can be used in other areas, where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of standards, setting (21 months after availability) as the date of w

29、ithdrawal (dow) of national standards which conflict with the European standards of this package. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 1

30、4303, Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equipment and industrial installations Factory made flexible elastomeric foam (FEF) products Specification EN

31、 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for building equipment and industrial installations Factory made calcium silicate (CS) products Specification EN 14307

32、, Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN 14308, Thermal insulation products for building equipment and industrial installations Factory made rigid polyurethane foam (PUR) and polyisocyanur

33、ate foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specification EN 14313, Thermal insulation products for building equipment and industrial installations Factory made pol

34、yethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification EN 15501, Thermal insulation products for building equipment and industrial installations Factory made expanded

35、 perlite (EP) and exfoliated vermiculite (EV) products Specification According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark,

36、 Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 14304:2015EN

37、 14304:2015 (E) 6 1 Scope This European Standard specifies the requirements for factory made flexible elastomeric foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 200 C to + 175 C.

38、 Below an operating temperature of - 50 C, tests regarding the suitability of the products in the intended application should be performed. Manufacturers advice should be heeded in all cases. The products are manufactured in the form of sheets, tubes, rolls and tapes with or without coating and/or s

39、elf-adhesive backing and/or different closure systems. This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and compos

40、ite panels; the performance of systems incorporating these products is not covered. This European Standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given appl

41、ication can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,050 W/(mK) at 10 C are not covered by this standard. This European Standard does not cover products for the insulation of the building structure. The normative part of this Eur

42、opean Standard does not cover compressive stress (see D.5). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the la

43、test edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications - Determination of length and width EN 823, Thermal insulating products for building applications - Determination of thickness EN 824, Thermal insulating products

44、 for building applications - Determination of squareness EN 1604, Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions EN 1609, Thermal insulating products for building applications - Determination of short

45、 term water absorption by partial immersion EN 12085, Thermal insulating products for building applications - Determination of linear dimensions of test specimens EN 12086:2013, Thermal insulating products for building applications - Determination of water vapour transmission properties EN 12667, Th

46、ermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance BS EN 14304:2015EN 14304:2015 (E) 7 EN 12939, Thermal performance of building materials and products -

47、 Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance EN 13172:2012, Thermal insulation products - Evaluation of conformity EN 13467, Thermal insulating products for building equipment and industrial inst

48、allations - Determination of dimensions, squareness and linearity of preformed pipe insulation EN 13468, Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH EN 13469, The

49、rmal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation EN 13472, Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation EN 13501-1:2007+A1:2009, Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests EN 13823,