EN 14305-2009 1875 Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification (Incorporates Amendme.pdf

1、BS EN 14305:2009ICS 91.100.60NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDThermal insulationproducts for buildingequipment andindustrial installations Factory madecellular glass(CG) products SpecificationCopyright European Committee for Standardization Provid

2、ed by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31January 2010 BSI 2010ISBN 978 0 580 53417 1Amendments/corrigenda issued since

3、 publicationDate CommentsBS EN 14305:2009National forewordThis British Standard is the UK implementation of EN 14305:2009. The UK participation in its preparation was entrusted to TechnicalCommittee B/540/6, Fibrous and inorganic thermal insulation materials. A list of organizations represented on t

4、his committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunityfrom legal obligations.Copyright European Commi

5、ttee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14305:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14305 November 2009 ICS 91.100.60 English Version Thermal insulation products for bui

6、lding equipment and industrial installations - Factory made cellular glass (CG) products - Specification Produits isolants thermiques pour lquipement du btiment et les installations industrielles - Produits manufacturs en verre cellulaire (CG) - Spcification Wrmedmmstoffe fr die technische Gebudeaus

7、rstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus Schaumglas (CG) - Spezifikation This European Standard was approved by CEN on 29 September 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for

8、giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official

9、 versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Be

10、lgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE F

11、OR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14305:2009: ECopyright European Committee fo

12、r Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14305:2009EN 14305:2009 (E) 2 Contents Page Foreword 41 Scope 62 Normative references 63 Terms, definitions, symbols, units and abbreviated terms .84 Requi

13、rements 115 Test methods . 186 Designation code 227 Evaluation of conformity 238 Marking and labelling . 23Annex A (normative) Factory production control . 25Annex B (informative) Determination of minimum service temperature 29Annex C (informative) Additional properties . 33Annex D (informative) Pre

14、paration of the flat test specimens to measure thermal conductivity 35Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 36Bibliography . 44Figure Figure ZA.1 Example of CE marking information 43Tables Table 1 Dimensional to

15、lerances 12Table 2 Dimensional stability under specified conditions 13Table 3 Levels for compressive strength . 15Table 4 Levels for bending strength . 16Table 5 Levels for deformation under point load . 16Table 6 Test methods, test specimens and conditions. 20Table A.1 Minimum product testing frequ

16、encies . 25Table A.2 Minimum product testing frequencies for the reaction to fire of the product as placed on the market . 27Table C.1 Test methods, test specimens, conditions and minimum testing frequencies . 34Table ZA. 1 Relevant clauses . 37Copyright European Committee for Standardization Provid

17、ed by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14305:2009EN 14305:2009 (E) 3 Table ZA.2 System(s) of attestation of conformity . 38Table ZA.3 Assignment of evaluation of conformity tasks for products under system 1 . 39Table Z

18、A.4 Assignment of evaluation of conformity tasks for products as placed on the market under system 3 or system 3 combined with system 4 for reaction to fire . 40Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitte

19、d without license from IHS-,-,-BS EN 14305:2009EN 14305:2009 (E) 4 Foreword This document (EN 14305:2009) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a nat

20、ional standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by August 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent r

21、ights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/106/EEC. For

22、relationship with EU Directive 89/106/EEC, see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting entities, who are bound by EU Directives to specify their requirements using European harmonized product standards, are allowed to demand a

23、dditional properties outside the provisions of this standard if this is technically necessary because of prevailing operational conditions of the building equipment or the industrial installation projected or because of safety regulations. This European Standard contains four annexes: Annex A (norma

24、tive), Factory production control Annex B (informative), Determination of minimum service temperature Annex C (informative), Additional properties Annex D (informative), Preparation of the flat test specimens to measure thermal conductivity Annex ZA (informative), Clauses of this European Standard a

25、ddressing the provisions of the EU Construction Products Directive This document includes a bibliography. This European Standard is one of a series of standards for insulation products used in building equipment and industrial installations, but this standard can be used in other areas, where approp

26、riate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of standards, setting 24 months after availability as the date of withdrawal (dow) of national standards which conflict with the European Standards of this package.

27、 The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 14303, Thermal insulation products for building equipment and industrial installations Factory mad

28、e mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equipment and industrial installations Factory made flexible elastomeric foam (FEF) products Specification Copyright European Committee for Standardization Provided by IHS under license with CENNot for Resa

29、leNo reproduction or networking permitted without license from IHS-,-,-BS EN 14305:2009EN 14305:2009 (E) 5 EN 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for build

30、ing equipment and industrial installations Factory made calcium silicate (CS) products Specification EN 14307,Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN 14308, Thermal insulation products for

31、building equipment and industrial installations Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specificatio

32、n EN 14313, Thermal insulation products for building equipment and industrial installations Factory made polyethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification Acc

33、ording to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lat

34、via, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted witho

35、ut license from IHS-,-,-BS EN 14305:2009EN 14305:2009 (E) 6 1 Scope This European Standard specifies the requirements for factory made cellular glass products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approxima

36、tely - 265 C to + 430 C. NOTE Below an operating temperature of - 50 C, special tests regarding the suitability of the product in the intended application are advised (e.g. liquefaction of oxygen). Manufacturers advice should be heeded in all cases. The products are manufactured in the form of faced

37、 or unfaced boards, pipe sections, segments and prefabricated ware. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and co

38、mposite panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given applicatio

39、n can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,065 W/(mK) at 10 C are not covered by this standard. This standard does not cover products for the insulation of the building structure. 2 Normative references The following referenc

40、ed documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications Determina

41、tion of length and width EN 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatness EN 826:1

42、996, Thermal insulating products for building applications Determination of compression behaviour EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1606, Thermal insulating products for buildin

43、g applications Determination of compressive creep EN 1607, Thermal insulating products for building applications Determination of tensile strength perpendicular to faces EN 1608, Thermal insulating products for building applications Determination of tensile strength parallel to faces Copyright Europ

44、ean Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14305:2009EN 14305:2009 (E) 7 EN 1609, Thermal insulating products for building applications Determination of short term water absorption b

45、y partial immersion EN 12085, Thermal insulating products for building applications Determination of linear dimensions of test specimens EN 12086, Thermal insulating products for building applications Determination of water vapour transmission properties EN 12087, Thermal insulating products for bui

46、lding applications Determination of long term water absorption by immersion EN 12089, Thermal insulating products for building applications Determination of bending behaviour EN 12430, Thermal insulating products for building applications Determination of behaviour under point load EN 12667, Thermal

47、 performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance EN 12939, Thermal performance of building materials and products Determination of thermal resistance by means o

48、f guarded hot plate and heat flow meter methods Thick products of high and medium thermal resistance EN 13172, Thermal insulating products Evaluation of conformity EN 13467, Thermal insulating products for building equipment and industrial installations Determination of dimensions, squareness and linearity of preformed pipe insulation EN 13468, Thermal insulating products for building equipment and industrial installations Determination of