EN 1539-2015 en Dryers and ovens in which flammable substances are released - Safety requirements《释放可燃物质的烘干机和微波炉 安全要求》.pdf

1、BSI Standards PublicationBS EN 1539:2015Dryers and ovens, in whichflammable substancesare released SafetyrequirementsBS EN 1539:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 1539:2015. It supersedes BS EN 1539:2009 which is withdrawn.The UK participation

2、in its preparation was entrusted to TechnicalCommittee MCE/3/8, Thermoprocessing equipment - Safety.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are respo

3、nsible for its correctapplication. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 77937 4ICS 25.180.01Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards

4、 Policy and Strategy Committee on 31 October 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 1539:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1539 October 2015 ICS 25.180.01 Supersedes EN 1539:2009English Version Dryers and ovens, in which flammable

5、substances are released - Safety requirements Schoirs et fours dans lesquels se dgagent des substances inflammables - Prescriptions de scurit Trockner und fen, in denen brennbare Stoffe freigesetzt werden - Sicherheitsanforderungen This European Standard was approved by CEN on 27 June 2015. CEN memb

6、ers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicati

7、on to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Managem

8、ent Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

9、Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17

10、, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1539:2015 EBS EN 1539:2015EN 1539:2015 (E) 2 Contents Page European foreword . 5 Introduction 7 1 Scope 8 2 Normative references 8 3 Terms and definitions 10 4

11、Significant hazards 16 5 Safety requirements and/or protective measures 22 5.1 General . 22 5.2 Safety requirements against mechanical hazards . 22 5.2.1 Shearing, crushing, drawing-in . 22 5.2.2 Means of escape 22 5.2.3 Safety requirements against slip and fall hazards . 23 5.3 Safety requirements

12、against electrical hazards 23 5.3.1 General . 23 5.3.2 Electrical equipment . 23 5.3.3 External influences on the electrical equipment 23 5.4 Safety requirements against thermal hazards 23 5.5 Safety requirements against noise hazards 24 5.6 Safety requirements against radiation hazards 24 5.7 Safet

13、y requirements against health hazardous substances . 25 5.8 Fire protection and prevention . 25 5.8.1 General . 25 5.8.2 Materials and construction . 25 5.8.3 Heating systems 26 5.8.4 Prevention of ignition by hot surfaces . 26 5.8.5 Prevention of ignition by overheating 26 5.8.6 Prevention of auto-

14、ignition 26 5.9 Explosion protection and prevention requirements 27 5.9.1 General . 27 5.9.2 Type A-dryers 27 5.9.3 Type B-dryers 33 5.10 Control systems 38 5.10.1 General . 38 5.10.2 Requirements for type A-dryers . 38 5.10.3 Requirements for type B-dryers . 41 6 Verification of the safety requirem

15、ents and/or measures . 43 7 Information for use . 45 7.1 General . 45 7.2 Instruction handbook . 46 7.2.1 General . 46 7.2.2 Information related to installation 47 7.2.3 Information related to operation . 47 7.2.4 Information related to maintenance . 48 7.3 Marking 49 BS EN 1539:2015EN 1539:2015 (E)

16、 3 Annex A (normative) Basis for air flow calculation of chamber dryers and continuous flow dryers 50 A.1 Calculation basis for chamber dryers . 50 A.1.1 General . 50 A.1.2 Calculation of chamber dryers in case of rapid evaporation - Method A . 50 A.1.3 Determination in case of slow evaporation Meth

17、od B . 54 A.2 Calculation basis for continuous flow dryers . 55 Annex B (informative) Examples of calculation . 57 B.1 Chamber dryers . 57 B.1.1 Example 1: Calculation of the required minimum exhaust flow (see 3.20) 57 B.1.2 Example 2: Calculation of the maximum admissible amount of varnish 58 B.2 C

18、ontinuous flow dryers 60 B.2.1 Example 3: Calculation of the minimum exhaust flow rate . 60 B.2.2 Example 4: Calculation of the minimum exhaust flow rate . 62 B.2.3 Example 5: Calculation of the maximum admissible throughput of flammable substances . 63 Annex C (normative) Concentration measurement

19、in dryers . 65 C.1 Measurement of flammable substances . 65 C.1.1 General . 65 C.1.2 Requirements for concentration monitoring systems 65 C.2 Monitoring of oxygen concentration . 66 C.2.1 General . 66 C.2.2 Requirements for oxygen monitoring systems 66 Annex D (normative) Calculation of the lower ex

20、plosion limit at drying temperature . 68 D.1 General . 68 D.2 Influence of temperature on the indicated value of concentration (physical influence) . 68 D.3 Influence of the temperature of mixture on the kinetics of reaction (chemical influence) . 69 D.4 Consideration of chemical and physical influe

21、nces . 69 Annex E (normative) Explosion reliefs 70 Annex F (informative) Sensors for measurement of the volume flow 71 F.1 Pitot-static tubes . 71 F.2 Venturi nozzles 71 F.3 Wind vanes and plate anemometers . 71 F.4 Hot-wire anemometers. 71 F.5 Ultrasonic anemometers 71 F.6 Windmill anemometer 72 BS

22、 EN 1539:2015EN 1539:2015 (E) 4 Annex G (normative) Requirements for energy-efficiency and reduction of environmental impact . 73 G.1 General . 73 G.2 Acquisition 73 G.3 Production 73 G.4 Use . 73 G.4.1 General . 73 G.4.2 Energy usage 73 G.4.3 Minimizing of emissions to air 74 G.4.4 Minimizing of no

23、ise emissions 74 G.5 End of Life 74 Annex H (informative) Guide for implementation of control system requirements for explosion protection for type A dryers 75 H.1 General . 75 H.2 Example for chamber dryer . 76 H.3 Example for continuous flow dryer . 77 Annex ZA (informative) Relationship between t

24、his European Standard and the Essential Requirements of EU Directive 2006/42/EC . 80 Bibliography . 81 BS EN 1539:2015EN 1539:2015 (E) 5 European foreword This document (EN 1539:2015) has been prepared by Technical Committee CEN/TC 271 “Surface treatment equipment - Safety”, the secretariat of which

25、 is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2016, and conflicting national standards shall be withdrawn at the latest by April 2016. This document supersedes EN 1539:200

26、9. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the EU Directive 2006/42/EC. For relationship with the EU Directive, see informative Annex ZA, which is an integral part of this

27、document. This European Standard is part of a series of standards in the area of safety for development and construction of machines and plants for the coating of surfaces with organic substances (paints, lacquers and similar products). This European Standard was prepared with contribution of the fo

28、llowing TCs: TC 186 “Industrial thermoprocessing - Safety“; TC 198 “Printing and paper machinery - Safety“; TC 200 “Tannery machinery - Safety“; TC 202 “Foundry machinery“. NOTE 1 Although a dryer as a whole is not subject to the ATEX Directive 94/9/EC in a formal way, this document is based on a fu

29、ndamental risk assessment according to this Directive. NOTE 2 This European Standard is based on an explosion protection concept which does not define zones for areas with potentially explosive atmosphere. In relation to the previous version of the standard, the following main modifications have bee

30、n made the scope has been adjusted to meet the fields of application of the standard; the requirements for safety related controls have been modified for clarification; guidance for implementation of safety related control systems has been included; requirements for monitoring of heating system have

31、 been implemented; requirements for type B dryers have been detailed; requirements for minimization of energy usage and environmental impact have been included. BS EN 1539:2015EN 1539:2015 (E) 6 Attention is drawn to the possibility that some of the elements of this document may be the subject of pa

32、tent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, C

33、roatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey an

34、d the United Kingdom. BS EN 1539:2015EN 1539:2015 (E) 7 Introduction This document is a type C standard as stated in EN ISO 12100. This document is of relevance in particular for the following stakeholder group representing the market players with regard to machinery safety: machinery manufacturers

35、(small, medium and large enterprises); health and safety bodies (regulators, accident prevention organisations, market surveillance). The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this European Standard. W

36、hen provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C stan

37、dard. BS EN 1539:2015EN 1539:2015 (E) 8 1 Scope This European Standard deals with all significant hazards, hazardous situations and hazardous events relevant to ovens and dryers in which flammable substances are released by evaporation from and curing of coating materials. The specific significant r

38、isks related to the use of this machinery with foodstuff and pharmaceutical products are not dealt with in this European Standard. This European Standard is only applicable to machines which are used as intended and under the conditions which are foreseeable as malfunction by the manufacturer (see C

39、lause 4). For ovens and dryers in which flammable substances are released by evaporation from and curing of coating materials, in which the concentration of these flammable substances shall not, under no circumstances, exceed 3 % of the LEL, EN 746-1 and EN 746-2 may be applied instead of this Europ

40、ean Standard. This European Standard is not applicable to: ovens for hardening metals; enamelling plants; portable heating systems for drying (for instance infrared radiant heaters, hot-air blowers, blow-dryers); solvent recovery plants; distillation and/or refraction plants; textile dry-cleaning sy

41、stems. This European Standard is not applicable to machinery manufactured before the date of its publication as EN. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only t

42、he edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 547-1, Safety of machinery Human body measurements Part 1: Principles for determining the dimensions required for openings for whole body access into machinery EN 61

43、9, Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of unit loads EN 746-1, Industrial thermoprocessing equipment Part 1: Common safety requirements for industrial thermoprocessing equipment EN 746-2, Industrial thermoprocessing equipment -

44、Part 2: Safety requirements for combustion and fuel handling systems EN 953, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards BS EN 1539:2015EN 1539:2015 (E) 9 EN 1127-1, Explosive atmospheres - Explosion prevention and protection - Part 1:

45、Basic concepts and methodology EN 12198-1:2000+A1:2008, Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles EN 12198-2, Safety of machinery Assessment and reduction of risks arising from radiation emitted by machinery Part

46、2: Radiation emission measurement procedure EN 12433-1, Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors EN 12433-2, Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors EN 12445, Industrial, commercial and garage doors and

47、gates - Safety in use of power operated doors - Test methods EN 12453, Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements EN 12635, Industrial, commercial and garage doors and gates Installation and use EN 12978, Industrial, commercial and garage

48、 doors and gates Safety devices for power operated doors and gates Requirements and test methods EN 13023, Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment Accuracy grades 2 and 3 EN 13463-1, Non-electrical equipment for use in potentially explo

49、sive atmospheres - Part 1: Basic method and requirements EN 14462, Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 EN 14994, Gas explosion venting protective systems EN 15061, Safety of machinery safety requirements for strip processing line machinery and equipment EN 50104, Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods EN 60079-0, Explosive atmospheres