1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 1609:2013Thermal insulating productsfor building applications Determination of short termwater absorption by partialimmersionBS EN 1609:2013 BRITISH STANDARDNational forewo
2、rdThis British Standard is the UK implementation of EN 1609:2013. Itsupersedes BS EN 1609:1997 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/540, Energy performance of materials components andbuildings.A list of organizations represented on this com
3、mittee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 78048 6ICS 91.100.6
4、0Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2013.Amendments issued since publicationDate Text affectedBS EN 1609:2013EUROPEAN STANDARD NORME EUROPENN
5、E EUROPISCHE NORM EN 1609 March 2013 ICS 91.100.60 Supersedes EN 1609:1996English Version Thermal insulating products for building applications - Determination of short term water absorption by partial immersion Produits isolants thermiques destins aux applications du btiment - Dtermination de labso
6、rption deau court terme: essai par immersion partielle Wrmedmmstoffe fr das Bauwesen - Bestimmung der Wasseraufnahme bei kurzzeitigem teilweisem EintauchenThis European Standard was approved by CEN on 15 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which s
7、tipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Europe
8、an Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are
9、the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Roma
10、nia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means r
11、eserved worldwide for CEN national Members. Ref. No. EN 1609:2013: EBS EN 1609:2013EN 1609:2013 (E) 2 Contents Page Foreword . 3 1 Scope 5 2 Normative references . 5 3 Terms and definitions 5 4 Principle 5 5 Apparatus . 5 6 Test specimens 5 6.1 Dimensions of test specimens 5 6.2 Number of test speci
12、mens . 6 6.3 Preparation of test specimens . 6 6.4 Conditioning of test specimens. 6 7 Procedure . 6 7.1 Test conditions . 6 7.2 Test procedure . 6 7.2.1 General . 6 7.2.2 Method A (drainage) . 6 7.2.3 Method B (deduction of initial water uptake) 7 8 Calculation and expression of results 8 9 Accurac
13、y of measurement . 9 10 Test report 9 BS EN 1609:2013EN 1609:2013 (E) 3 Foreword This document (EN 1609:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a
14、 national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subjec
15、t of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1609:1996. The revision of this standard contains no major changes, only minor corrections and clarifications of an editorial nature. This European Standard
16、 is one of a series of standards which specify test methods for determining dimensions and properties of thermal insulating materials and products. It supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on t
17、he approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements. This European Standard has been drafted for applications in building, but it may also be used in
18、other areas where it is relevant. This European test standard is one of the following group of interrelated standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which fall within the scope of CEN/TC 88: EN 822, Thermal insulating pr
19、oducts for building applications Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building appli
20、cations Determination of flatness EN 826, Thermal insulating products for building applications Determination of compression behaviour EN 1602, Thermal insulating products for building applications Determination of the apparent density EN 1603, Thermal insulating products for building applications D
21、etermination of dimensional stability under constant normal laboratory conditions (23 C/50 % relative humidity) EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating produc
22、ts for building applications Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep BS EN 1609:2013EN 1609:2013 (E) 4 EN 1607, Thermal insulating products for building
23、applications Determination of tensile strength perpendicular to faces EN 1608, Thermal insulating products for building applications Determination of tensile strength parallel to faces EN 1609, Thermal insulating products for building applications Determination of short-term water absorption by part
24、ial immersion EN 12085, Thermal insulating products for building applications Determination of linear dimensions of test specimens EN 12086, Thermal insulating products for building applications Determination of water vapour transmission properties EN 12087, Thermal insulating products for building
25、applications Determination of long-term water absorption by immersion EN 12088, Thermal insulating products for building applications Determination of long-term water absorption by diffusion EN 12089, Thermal insulating products for building applications Determination of bending behaviour EN 12090,
26、Thermal insulating products for building applications Determination of shear behaviour EN 12091, Thermal insulating products for building applications Determination of freeze-thaw resistance EN 12429, Thermal insulating products for building applications Conditioning to moisture equilibrium under sp
27、ecified temperature and humidity conditions EN 12430, Thermal insulating products for building applications Determination of behaviour under point load EN 12431, Thermal insulating products for building applications Determination of thickness for floating floor insulating products EN 13793, Thermal
28、insulating products for building applications Determination of behaviour under cyclic loading EN 13820, Thermal insulating materials for building applications Determination of organic content According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following cou
29、ntries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, P
30、oland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1609:2013EN 1609:2013 (E) 5 1 Scope This European Standard specifies the equipment and procedures for determining the short-term water absorption of test specimens by partial immersion. It
31、is applicable to thermal insulating products. NOTE It is intended to simulate the water absorption caused by a 24 h raining period during construction work. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its
32、application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12085, Thermal insulating products for building applications Determination of linear dimensions of test specimens ISO 5725-2
33、, Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method 3 Terms and definitions This European Standard contains no terms and definitions. 4 Principle A test specimen is pla
34、ced with its lower part in water, for a period of 24 h, and its change in mass is measured. The excess water adhering to the surface but not absorbed by the test specimen is removed by drainage (method A) or taken into account by deduction of the initial water uptake (method B). 5 Apparatus 5.1 Bala
35、nce, capable of determining the mass of a specimen to an accuracy of 0,1 g. 5.2 Water tank, with a device for keeping the water level constant to within 2 mm, and a device to keep the test specimen in position. The device to keep the test specimen in position shall not cover more than 15 % of the cr
36、oss-sectional area of the test specimen, which is exposed to water. An example is shown in Figure 1. 5.3 Tap water, adjusted to a temperature of (23 5) C. In case of dispute, deionised water shall be used. 5.4 Equipment for drainage. Examples are shown in Figures 2a) and 2b). 6 Test specimens 6.1 Di
37、mensions of test specimens The thickness of test specimens shall be the original product thickness. The test specimens shall be prisms of square cross section having a side length of (200 1) mm. BS EN 1609:2013EN 1609:2013 (E) 6 6.2 Number of test specimens The number of test specimens shall be as s
38、pecified in the relevant product standard. If the number is not specified, then at least four test specimens shall be used. In the absence of a product standard or any other European Technical Specification, the number of test specimens may be agreed between parties. 6.3 Preparation of test specimen
39、s The test specimens shall be cut so that they do not include product edges. The test specimens shall be prepared by methods that do not change the original structure of the product. Any skins, facings and/or coatings shall be retained. Special methods of preparation, when needed, are given in the r
40、elevant product standard or any other European Technical Specification. 6.4 Conditioning of test specimens The test specimens shall be conditioned for at least 6 h at (23 5) C. In case of dispute, they shall be conditioned at (23 2) C and (50 5) % relative humidity for the time stated in the relevan
41、t product standard. 7 Procedure 7.1 Test conditions Testing shall be carried out at (23 5) C. In case of dispute, it shall be carried out at (23 2) C and (50 5) % relative humidity. 7.2 Test procedure 7.2.1 General The choice of the method (A or B) shall be as specified in the relevant product stand
42、ard. In the absence of a product standard or any other European Technical Specification, the method may be agreed between parties. The dimensions of the test specimens shall be measured in accordance with EN 12085. 7.2.2 Method A (drainage) Weigh the test specimen to the nearest 0,1 g to determine i
43、ts initial mass, m0. Testing shall be carried out with half the number of specimens with one larger face up and the other half with the same larger face down. Place the test specimen in the empty water tank and apply a sufficient load to keep it partially immersed when water is added. Carefully add
44、the water to the tank until the bottom face of the test specimen is (10 2) mm below the surface of the water (see example in Figure 1). Ensure that the water level remains constant during the test. BS EN 1609:2013EN 1609:2013 (E) 7 After 24 h 30 min, remove the test specimen; drain it for (10 0,5) m
45、in by placing it vertically an a mesh, inclined at 45 as shown in Figure 2a) or 2b). Then weigh the test specimen to determine its mass, m24. Key 1 water tank 2 load to keep the test specimen in position 3 test specimen Figure 1 Examples of partial immersion test device a) b) Key 1 stainless steel m
46、esh 2 test specimen 3 perforated stainless steel Figure 2 Examples of suitable equipment for drainage 7.2.3 Method B (deduction of initial water uptake) Weigh the test specimen to an accuracy of 0,1 g to determine its initial mass, m0. Testing shall be carried out with half the number of specimens w
47、ith one larger face up and the other half with the same larger face down. Place the test specimen in the water tank in such position that it is partially immersed in water with its bottom face (10 2) mm below the water level. Remove the test specimen after 10 s holding it horizontally and place it,
48、within 5 s, in a plastic tray of known mass. Weigh this tray with the test specimen to determine the test specimen mass including the initial water uptake, m1. BS EN 1609:2013EN 1609:2013 (E) 8 Replace the test specimen in the water tank and apply a sufficient load to keep the test specimen partiall
49、y immersed in water with its bottom face (10 2) mm below the water level (see example in Figure 1). Ensure that the water level remains constant during the test. After 24 h 30 min remove the test specimen, holding it horizontally, and place it, within 5 s, in the plastic tray of known mass to determine its mass, m24. Method B is only applicable if the initial water uptake is less than or equal to 0,5 kg/m2, where this is calcula
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1