EN 1621-4-2013 en Motorcyclists- protective clothing against mechanical impact - Part 4 Motorcyclists- inflatable protectors - Requirements and test methods《摩托车手的防护服对机械影响 骑摩托车充气保护者.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 1621-4:2013Motorcyclists protectiveclothing against mechanicalimpactPart 4: Motorcyclists inflatable protectors Requirements and test methodsBS EN 1621-4:2013 BRITISH STAND

2、ARDNational forewordThis British Standard is the UK implementation of EN 1621-4:2013.The UK participation in its preparation was entrusted to TechnicalCommittee PH/3/9, Motorcyclists Personal Protective Equipment.A list of organizations represented on this committee can beobtained on request to its

3、secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 70556 4ICS 13.340.10Compliance with a British Standard cann

4、ot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 28 February 2013.Amendments issued since publicationDate Text affectedBS EN 1621-4:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1621-4 January

5、 2013 ICS 13.340.10 English Version Motorcyclists protective clothing against mechanical impact - Part 4: Motorcyclists inflatable protectors - Requirements and test methods Vtements de protection contre les chocs mcaniques pour motocyclistes - Partie 4 : Protecteurs gonflables pour motocyclistes -

6、Exigences et mthodes dessai Motorradfahrer-Schutzkleidung gegen mechanische Belastung - Teil 4: Aufblasbare Protektoren fr Motorradfahrer - Anforderungen und Prfverfahren This European Standard was approved by CEN on 3 November 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regu

7、lations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN memb

8、er. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. C

9、EN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

10、 Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and

11、 by any means reserved worldwide for CEN national Members. Ref. No. EN 1621-4:2013: EBS EN 1621-4:2013EN 1621-4:2013 (E) 2 Contents Page Foreword 4Introduction .51 Scope 62 Normative references 63 Terms and definitions .64 Requirements .84.1 General 84.2 Innocuousness .94.2.1 Colour .94.2.2 Hard com

12、ponents 94.2.3 Temperature exposure evaluation .94.3 Zones of protection .94.4 Intervention time 94.5 Duration time 94.6 Retention of the inflatable protector 94.7 Impact attenuation 104.8 Sizing and size marking . 104.9 Ergonomic requirements . 104.10 Trigger system function . 104.10.1 Activation f

13、orce . 104.10.2 Activation energy 104.10.3 Connection of airbag system to motorcycle 105 Sampling 106 Test methods . 116.1 Preconditioning and testing atmosphere . 116.2 Innocuousness 116.2.1 Colour fastness to water 116.2.2 Protection from hard components 116.2.3 Temperature exposure evaluation (ap

14、plicable only for hot gas generators) . 116.3 Measurement and marking of zones of protection . 116.4 Intervention time . 116.4.1 General . 116.4.2 Determination of the activation time. 116.4.3 Determination of the inflation time . 136.5 Determination of duration of inflated status 136.6 Impact atten

15、uation 136.7 Ergonomic tests 136.7.1 General . 136.7.2 Tests . 146.8 Evaluation of the function of the mechanism of activation 146.8.1 Evaluation of activation force 146.8.2 Evaluation of the activation energy 146.8.3 Connection to the motorcycle . 146.9 Uncertainty 147 Test results 158 Test report

16、. 169 Marking 16BS EN 1621-4:2013EN 1621-4:2013 (E) 3 10 Information supplied by the manufacturer . 17Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC 18Figures Figure 1 Trigger cable fixed to the motorbike behind the biker

17、. 12Figure 2 Trigger cable is fixed to the motorbike in front of the biker 12Figure 3 Example of graphical symbol 16Tables Table 1 Summary of the requirements 8Table 2 Transmitted force and performance levels . 10BS EN 1621-4:2013EN 1621-4:2013 (E) 4 Foreword This document (EN 1621-4:2013) has been

18、prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the l

19、atest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such

20、 patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this docume

21、nt. EN 1621 consists of the following parts, under the general title “Motorcyclists protective clothing against mechanical impact“: Part 1: Motorcyclists limb joint impact protectors Requirements and test methods Part 2: Motorcyclists back protectors Requirements and test methods Part 3: Motorcyclis

22、ts chest protectors Requirements and test methods1) Part 4: Motorcyclists inflatable protectors Requirements and test methods According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Bel

23、gium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switz

24、erland, Turkey and the United Kingdom. 1) Under development BS EN 1621-4:2013EN 1621-4:2013 (E) 5 Introduction Motorcyclists inflatable protectors are devices either embedded within or worn on top of other clothing, which aim to reduce the severity of injuries in case of motorcycle accidents. The pr

25、otectors covered by this standard give protection only when inflated. The performance requirements have been selected to provide the best practical compromise between protection, comfort, and ergonomic requirements. Protectors that are too stiff or heavy will not be worn. The test methods are design

26、ed to provide information on protection against mechanical impacts. The force levels in the tests do not relate directly to the forces riders are exposed to in accidents, but experiences have shown that products meeting the requirements of this European Standard may reduce the severity of injuries c

27、aused by impacts. In order to encourage the adoption of certified protection by the highest possible number of users, two performance levels are specified for inflatable protectors. These are level 1 for protectors designed to give protection whilst having low ergonomic penalties associated with its

28、 use and level 2 for protectors providing an increased protection with respect to level 1. There may be, however, weight and restriction penalties associated with level 2 protection. BS EN 1621-4:2013EN 1621-4:2013 (E) 6 1 Scope This European Standard covers requirements and test methods for mechani

29、cally activated inflatable protectors for motorcycle riders (in the following text called protector“). It specifies the minimum level of protection, the minimum intervention time of inflated bag, and the minimum coverage to be provided by motorcyclists protectors worn by riders. The requirements of

30、this standard are applicable to various design of inflatable protectors and refers to all body areas and their combinations which are claimed to be protected. Inflatable protectors covered by this standard may be incorporated in motorcycle garments or equipped with by appropriate restraint systems a

31、nd worn on their own. This European Standard contains the requirements for the performance of the system during an accident and details of the test methods, requirements for sizing, ergonomics, innocuousness, labelling and the provision of information. Inflatable protectors other than mechanically a

32、ctivated are not covered by this standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of t

33、he referenced document (including any amendments) applies. EN 340, Protective clothing General requirements EN 1621-1:2012, Motorcyclists protective clothing against mechanical impact Part 1: Motorcyclists limb joint impact protectors Requirements and test methods EN 1621-2, Motorcyclists protective

34、 clothing against mechanical impact Part 2: Motorcyclists back protectors Requirements and test methods EN ISO 105-E01, Textiles Tests for colour fastness Part E01: Colour fastness to water (ISO 105-E01) EN ISO 11642, Leather Tests for colour fastness Colour fastness to water (ISO 11642) 3 Terms and

35、 definitions For the purposes of this document, the terms and definitions given in EN 1621-1:2012 and the following apply. 3.1 inflatable motorcyclists protector specific device worn by motorcyclists, which will automatically inflate in the event of an accident 3.2 intervention time sum of the activ

36、ation time plus the inflation time in milliseconds 3.3 activation time period of time used by the triggering system to fire the gas generator, corresponding to the interval of time from the beginning of the accident to the start of the inflation of the protector 3.4 inflation time time period requir

37、ed for the airbag to be fully inflated BS EN 1621-4:2013EN 1621-4:2013 (E) 7 3.5 mechanical triggering system system which is fired by the severance of a physical connection between motorbike and protector 3.6 trigger cable mechanical connection between the inflatable device and the motorbike 3.7 ac

38、tivation force force transmitted by the trigger cable to start the inflation process 3.8 activation energy energy required by the mechanical trigger system to start the inflation process 3.9 duration time time period whereby the operating pressure inside the airbag remains above the minimum operatin

39、g pressure declared by the manufacturer BS EN 1621-4:2013EN 1621-4:2013 (E) 8 4 Requirements 4.1 General Motorcyclists protectors shall meet an overall requirement that they are safe to use, comfortable to wear and fit for their purpose. Table 1 gives a summary of the requirements. Unless otherwise

40、specified all values and linear dimensions shall be provided with a deviation of 2 %. Table 1 Summary of the requirements Clause Requirements Test Values 4.2 Innocuousness Colour fastness to water 6.2.1 At least grade 4 of the Grey scale Protection from any hard components 6.2.2 35 kN Temperature ex

41、posure evaluation (where applicable) 6.7 Average value 48 C. No single value shall exceed 55 C 4.3 Minimum zone of protection 4.4 Intervention time 6.4 200 ms 4.5 Duration time 6.5 5 s 4.6 Retention of protective bag 4.7 Impact attenuation 6.6 Level 1: Overall mean value 4,5 kN Single strike 6 kN Le

42、vel 2: Overall mean value 2,5 kN Single strike 3 kN 4.8 Sizing and size marking 4.9 Ergonomic requirements 6.7 All answers shall be “yes” 4.10 Trigger system function Activation force of mechanical triggering system 6.8.1 30 N 250 N Activation energy of mechanical triggering system 6.8.2 5 J Breakin

43、g strength of the physical connection between bike and protector 6.8.3 four times the activation force; in any case 400 N BS EN 1621-4:2013EN 1621-4:2013 (E) 9 4.2 Innocuousness 4.2.1 Colour The materials of the protectors shall comply with the requirements for innocuousness of materials in EN 340,

44、with the exception of the requirement concerning the colour fastness to perspiration. The colour fastness to water of the constituent materials which likely could come into contact with the skin of the user shall be determined in accordance with 6.2.1 and shall be at least grade 4 of the Grey scale

45、for the staining of any component of the multi-fibre reference fabric 4.2.2 Hard components No sharp edge shall be present in the protector. A layer of impact attenuation material shall be present between any hard components present in the inflation or actuation systems and the body of the user. Thi

46、s requirement is applicable to mechanical parts of the inflation system; it is not applicable to zips, studs, fasteners and other elements not linked to the specific function of the inflating system. The protection shall be the same size of the component or its projected area plus a minimum border o

47、f 1 cm. The transmitted force level shall not be more than 35 kN. The impact attenuation protecting the user from hard components shall be tested in accordance with 6.2.2. 4.2.3 Temperature exposure evaluation Certain gas generators, which contain pyrotechnic components, can generate hot gases when

48、fired. These products shall be subjected to an evaluation heat exposure in accordance with 6.7. The average temperature recorded over the duration of the test shall not exceed 48 C. No single value shall exceed 55 C. NOTE Gas generators containing pyrotechnic composition are considered by Directive

49、2007/23/CE. 4.3 Zones of protection The body areas claimed to get protected shall be covered by the protector when inflated. The protector shall cover at least one of the zones of protection as described in any specific part of the EN 1621 series of standards. In case the protector covers larger than the required and/or additional body parts, the manufacturer shall su