EN 1756-2-2004 en Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2 Tail lifts for passengers (Incorporates Amendment A1 2009)《尾部提升机 轮式车辆上.pdf

1、BRITISH STANDARDBS EN 1756-2:2004Tail lifts Platform lifts for mounting on wheeled vehicles Safety requirements Part 2: Tail lifts for passengersICS 53.020.99g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g5

2、5g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58+A1:2009National forewordThis British Standard is the UK implementation of EN 1756-2:2004+A1:2009. It supersedes BS EN 1756-2:2004, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by

3、 tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee MHE/12, Lifting platforms.A list of organizations represented on this commit

4、tee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 1756-2:2004+A1:2009This

5、 British Standard was published under the authority of the Standards Policy and Strategy Committee on 22 July 2004 BSI 2009Amendments/corrigenda issued since publicationDate Comments 31 October 2009 Implementation of CEN amendment A1:2009ISBN 978 0 580 61613 6EUROPEAN STANDARD NORME EUROPENNE EUROPI

6、SCHE NORMEN 1756-2:2004+A1 July 2009 ICS 53.020.99 Supersedes EN 1756-2:2004English Version Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers Hayons lvateurs - Hayons lvateurs monter sur vhicules roulants - Prescriptions de scurit

7、- Partie 2: Hayons lvateurs pour passagers Hubladebhnen - Plattformlifte fr die Anbringung an Radfahrzeugen - Sicherheitsanforderungen - Teil 2: Hubladebhnen fr Passagiere This European Standard was approved by CEN on 5 May 2004 and includes Amendment 1 approved by CEN on 19 June 2009. CEN members a

8、re bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to

9、the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the sam

10、e status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Ro

11、mania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserve

12、d worldwide for CEN national Members. Ref. No. EN 1756-2:2004+A1:2009: EEN 1756-2:2004+A1:2009 (E) 2Contents pageForeword . 5Introduction 61 Scope 72 Normative references . 73 Terms and definitions . 84 List of hazards . 115 Safety requirements and/or measures 215.1 General requirements . 215.1.1 Si

13、zes and capacities of tail lifts . 215.2 Working area . 225.2.1 Lighting 225.2.2 Hand rails . 225.3 Manual effort 235.4 Operating speeds 235.4.1 General . 235.4.2 Vertical speed 235.4.3 Opening and closing speeds . 235.4.4 Tilting speed 235.5 Passenger stability . 235.5.1 Rotary lifts . 235.5.2 Stop

14、 devices 235.6 Limitations of travel 245.7 Layout of wires and pipes 245.8 Unauthorised operation 245.9 Isolation of energy sources . 245.10 Tail lift stowage . 255.10.1 Indication . 255.10.2 Security 255.11 Crushing and shearing . 255.12 Structure working coefficients 255.13 Platform 255.13.1 Surfa

15、ce . 255.13.2 Tail lift used as a link bridge 265.13.3 Visibility of platform 265.13.4 Protection of pedestrians . 265.14 Drive systems 265.14.1 Unintentional movements 265.14.2 Mechanical suspension systems 275.14.3 Hydraulic systems 285.15 Safety devices . 295.15.1 Safety mechanisms . 295.15.2 Spr

16、ings inside safety devices 305.16 Loading control . 305.16.1 Prevention of lifting excessive loads 305.16.2 Excessive moment 305.17 Control devices . 305.17.1 Controls for the use of disabled passengers . 305.17.2 Hold-to-run principle . 305.17.3 Logic . 305.17.4 Unintentional operation 305.17.5 One

17、 control device for several movements . 31BS EN 1756-2:2004+A1:2009EN 1756-2:2004+A1:2009 (E) 35.17.6 Several control devices for one movement . 315.18 Control positions 315.18.1 Multiple control positions 315.18.2 Location of control positions 316 Compatibility of lift and vehicle . 317 Verificatio

18、n of the safety requirements and/or measures 328 Information for use . 348.1 General . 348.2 Tail lift used as a link bridge 348.3 Inherent risks associated with improper use . 358.4 Location and nature of information for use . 358.4.1 Marking on the tail lift . 358.4.2 Handbooks . 358.4.3 Inspectio

19、n record 38Annex A (informative) Tail lift mechanisms and types . 39A.1 Mechanisms . 39A.1.1 Parallelogram 39A.1.2 Column . 41A.1.3 Telescopic 41A.2 Types 42A.2.1 Rotary . 42A.2.2 Inset 42A.2.3 Step. 43A.2.4 Internally mounted 43Annex B (normative) Crushing and shearing 44B.1 General . 44B.2 Platfor

20、m lifting and lowering . 44B.2.1 Minimum safety distances . 44B.2.2 Hinged foot protector . 44B.2.3 Safety cut-out 46B.2.4 Reversing mechanism 47B.3 Platforms capable of lifting above vehicle floor level . 48B.4 Platform closure 48Annex C (informative) Prevention of wheelchairs rolling unintentional

21、ly 49Annex D (normative) Drive systems - Steel wire ropes and chains 51D.1 Recommended specifications of steel wire ropes 51D.2 Dimensions of pulley grooves . 51D.3 Flare angle . 52D.4 Fleet angles . 53D.5 Pitch circle . 54Annex E (informative) Marking 55Annex F (normative) Verification by the insta

22、ller . 56F.1 Compatibility between the lift and the vehicle . 56F.2 Static test . 56F.2.1 Deformation . 56F.2.2 Drift . 56F.3 Dynamic test 56F.4 Test of operation and safety functions . 56F.5 Test to verify that the tail lift cannot lift excessive load . 57Annex G (informative) Overloads onto a plat

23、form at vehicle floor level . 58BS EN 1756-2:2004+A1:2009EN 1756-2:2004+A1:2009 (E) 4Annex ZA (informative) Relationship of this European Standard with EC Directives . 59Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ . 6

24、0Bibliography . 61BS EN 1756-2:2004+A1:2009EN 1756-2:2004+A1:2009 (E) 5 Foreword This document (EN 1756-2:2004+A1:2009) has been prepared by Technical Committee CEN/TC 98 “Lifting platforms”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national stan

25、dard, either by publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. This document includes Amendment 1, approved by CEN on 2009-06-19. This document supersedes EN 1756-2:2004. The star

26、t and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship wit

27、h EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ This standard comprises two parts: Part 1 relates specifically to tail lifts for goods (whether or not accompanied by an operator); Part 2 covers the special requirements of tail lifts for passengers, i

28、ncluding those with disabilities. This document includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Esto

29、nia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 1756-2:2004+A1:2009EN 1756-2:2004+A1:2009 (E) 6Introduction The mach

30、inery concerned and the extent to which hazards are covered are indicated in the scope of this standard. While producing this standard, it was assumed that: only trained persons operate the machine; components without specific requirements are: a) designed in accordance with the usual engineering pr

31、actice and calculation codes, including all failure modes; b) of sound mechanical and electrical construction; c) made of materials, with adequate strength and of suitable quality; d) free of defects; harmful materials, such as asbestos are not used; components are kept in good repair and working or

32、der, so that the required dimensions remain fulfilled despite wear; by design of the load bearing elements, a safe operation of the machine is assured for loading ranging from zero to 100 % of the rated possibilities and during the tests; a mechanical device built according to good practice and the

33、requirements of the standard, will not deteriorate to a point of creating a hazard without the possibility of detection; the equipment is capable of operating correctly within a temperature range of 15 C to + 40 C; a negotiation takes place between the manufacturer of the tail lift and the installer

34、 for the characteristics of the supporting wheeled vehicle (see also clause 6), the fitting of the tail lift on or in the vehicle and between the installer and the user relating to the specific conditions of the use, places of use of the machinery, also some of the characteristics of the vehicle and

35、 the appropriate language; the working area is adequately lit (if lighting is not provided with the tail lift); if the place of installations allows a vertical falling height of persons of more than 3 m notwithstanding the limited travel height indicated in the scope, means external to the machine a

36、re used to limit this falling height to 3 m. !This European Standard is a type C standard as stated in EN ISO 12100.“When the provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisi

37、ons of the other standards, for machines that have been built according to the provisions of this type C standard. BS EN 1756-2:2004+A1:2009EN 1756-2:2004+A1:2009 (E) 71 Scope Part 2 of standard EN 1756 specifies safety requirements for design of tail lifts as defined in 3.1 for mounting on wheeled

38、passenger vehicles. Vehicles for the loading of disabled passengers onto aircraft and ships are included within the scope of the standard (although dock-mounted lifts are excluded). It also specifies the verification of such tail lifts and the safety information that shall be provided for their use.

39、 This document deals with the technical requirements to minimise the hazards listed in clause 4 which can arise during the operation of tail lifts when carried out in accordance with the specifications as intended by the manufacturer or his authorised representative. It applies to passenger tail lif

40、ts: used for the purpose of embarking and/or disembarking passengers to and from such vehicles; intended to be fitted, temporarily or permanently, either inside or on the front, side or rear of the wheeled vehicle; driven either by hand or by electric power; equipped with a platform to support passe

41、ngers who may be pedestrians or riders in wheelchairs and may be accompanied by an attendant. Embarking and/or disembarking operations include the use of a tail lift to lift and/or lower passengers, and if specifically approved by the manufacturer, for use as a link bridge. The standard covers the s

42、ignificant hazards which could occur when a tail lift is used as intended and under the conditions foreseen by the manufacturer. A list of significant hazards is given in clause 4. This document is not applicable to tail lifts which are manufactured before the date of publication of this document by

43、 CEN. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 574:1996, Safety

44、of machinery Two-hand control devices Functional aspects Principles for designEN 811, Safety of machinery Safety distances to prevent danger zones being reached by the lower limbsEN 982, Safety of machinery Safety requirements for fluid power systems and their components Hydraulics EN 60204-1:1997,

45、Safety of machinery Electrical equipment of machines Part : General requirements (IEC 60204-:997) EN 61310-2, Safety of machinery Indication, marking and actuation Part 2: Requirements for marking (IEC 630-2:995) BS EN 1756-2:2004+A1:2009EN 1756-2:2004+A1:2009 (E) 8EN ISO 12100-1, Safety of machiner

46、y Basic concepts, general principles for design Part :Basic terminology, methodology (ISO 200-:2003)EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2 Technical principles and specifications (ISO 200-2:2003)EN ISO 14122-2, Safety of machinery Permanent mean

47、s of access to machinery - Part 2: Working platforms and walkways (ISO 422-2:200)3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 tail lift lifting device suitable for installation on or in a wheeled passenger vehicle and which is used for emb

48、arking passengers into or disembarking passengers from such a vehicle. Such passengers may in particular be of reduced mobility and include those in wheelchairs The device consists essentially of a platform, a drive system, a support structure and one or more control positions 3.2 link bridge application of a tail lift in which the platform is used to span from its associated vehic