EN 1780-2-2002 en Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting master alloys and castings - Part 2 Chemical symbol based designation syste.pdf

1、BRITISH STANDARD BS EN 1780-2:2002 Aluminium and aluminium alloys Designation of alloyed aluminium ingots for remelting, master alloys and castings Part 2: Chemical symbol based designation system The European Standard EN 1780-2:2002 has the status of a British Standard ICS 77.150.10 BS EN 1780-2:20

2、02 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 30 October 2002 BSI 30 October 2002 ISBN 0 580 40655 5 National foreword This British Standa

3、rd is the official English language version of EN 1780-2:2002. It supersedes BS EN 1780-2:1997 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee NFE/35, Light metals and their alloys, which has the responsibility to: A list of organizations represented

4、on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by

5、 using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immuni

6、ty from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them i

7、n the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No.

8、 Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN17802 October2002 ICS77.150.10 SupersedesEN17802:2002 Englishversion AluminiumandaluminiumalloysDesignationofalloyed aluminiumingotsforremelting,masteralloysandcastingsPart 2:Chemicalsymbolbaseddesignationsystem Aluminiumetalliagesdalumi

9、niumSystmede dsignationapplicableauxlingotspourrefusionen aluminiumalli,auxalliagesmresetauxproduitsmouls Partie2:Systmededsignationbassurlessymboles chimiques AluminiumundAluminiumlegierungenBezeichnungvon legiertemAluminiuminMasseln,Vorlegierungenund GussstckenTeil2:Bezeichnungssystemmit chemische

10、nSymbolen ThisEuropeanStandardwasapprovedbyCENon2September2002. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational s

11、tandardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe off

12、icial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION E

13、UROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2002CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN17802:2002EEN17802:2002(E) 2 Contents page 1 Scope 4 2 Normativereferences 4 3 Basisofcodification. .4 4 Rulesforthecodedde

14、signationofaluminiumalloysandmasteralloys5 4.1 General5 4.2 Rulesfordistinguishingbetweentwoalloysofsimilarcomposition 5 4.3 Specialapplicationformasteralloys . .6 AnnexA (normative) Internationalchemicalsymbols 7 Bibliography 8EN17802:2002(E) 3 Foreword Thisdocument(EN17802:2002)hasbeenpreparedbyTe

15、chnicalCommitteeCEN/TC132,“Aluminiumand aluminiumalloys“,thesecretariatofwhichisheldbyAFNOR. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidenticaltextor byendorsement,atthelatestbyApril2003,andconflictingnationalstandardsshallbewithdrawnatthelatestby April2003

16、. Withinitsprogrammeofwork,TechnicalCommitteeCEN/TC132entrustedCEN/TC132/WG1“Liquidmetal, unalloyedandalloyedingots “topreparethefollowingstandard: EN17802, AluminiumandaluminiumalloysDesignationofalloyedaluminiumingotsforremelting,masteralloys andcastingsPart2:Chemicalsymbolbaseddesignationsystem.

17、ThisdocumentsupersedesEN17802:1996“AluminiumandaluminiumalloysDesignationofunalloyedand alloyedaluminiumingotsforremelting,masteralloysandcastingsPart2:Chemicalsymbolbaseddesignation system“. Inthisrevisededition,unalloyedaluminiumingotshavebeenremovedfromthescopeandprovisionsforunalloyed aluminiumi

18、ngotshavebeendeleted. Theprovisionsaboutthewritingrulesofunalloyedaluminiumhasbeentransferredintotherevisedversionof EN576. ThisEuropeanStandardEN1780,“ AluminiumandaluminiumalloysDesignationofalloyedaluminiumingotsfor remelting,masteralloysandcastings ”,comprisesofthefollowingparts: Part1:Numerical

19、designationsystem Part2:Chemicalsymbolbaseddesignationsystem Part3:Writingrulesforchemicalcomposition AnnexAisnormative. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark

20、,Finland, France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Spain, Sweden,SwitzerlandandtheUnitedKingdom.EN17802:2002(E) 4 1Scope ThisEuropeanStandardspecifiesachemicalsymbolbaseddesignationsystemforaluminiumalloysandmaster alloysasspecifiedintherelevantEuropea

21、nStandards.Itappliestoingotsforremeltingandtocastings. AdesignationsystemforunalloyedaluminiumisspecifiedinEN576. AnalternativenumericaldesignationsystemisspecifiedinEN17801.Writingrulesforchemicalcompositionare specifiedinEN17803. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundat

22、edreference,provisionsfromotherpublications.These normativereferencesarecitedattheappropriateplacesinthetextandthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropean Standardonlywhenincorporatedinitbyamendmentorrevision.Foru

23、ndatedreferencesthelatesteditionofthe publicationreferredtoapplies(includingamendments). EN575, AluminiumandaluminiumalloysMasteralloysproducedbymeltingSpecifications. EN1676, AluminiumandaluminiumalloysAlloyedingotsforremeltingSpecifications. EN1706, AluminiumandaluminiumalloysCastingsChemicalcompo

24、sitionandmechanicalproperties. EN17803:2002, AluminiumandaluminiumalloysDesignationofalloyedaluminiumingotsforremelting,master alloysandcastingsPart3:Writingrulesforchemicalcomposition. 3 Basisofcodification Thedesignationofaluminiumalloysandmasteralloysshallbebasedontheirchemicalsymbols,usuallyfoll

25、owed bynumbersindicatingthenominalcontentoftheconsideredalloyingelement. Thechemicalsymbolsusedshallbethoseoftheinternationalnomenclature(seeAnnexA). Thenumbersorfiguresindicatingthenominalcontentofthealloyingelementinquestionshallbebasedonthe chemicalcompositionlimitsspecifiedinclause3ofEN17803:200

26、2. Preferablyalldesignationscomplyingwiththiscodificationshouldbeputwithinsquarebrackets,followingthefive figuredesignation.Ifonlythechemicalsymbolbaseddesignationisused,thenitshallhavetheprefixEN,followed byablankspace,thentheletterArepresentingaluminiumandtheletterBrepresentingingotsforremelting,o

27、rthe letterCrepresentingcastings,ortheletterMrepresentingmasteralloys. Thisletter(B,CorM)shallbeseparatedfromthefollowingdesignationbyahyphen. EXAMPLE ENAB45400AlSi5Cu3orENABAlSi5Cu3 ThedesignationscurrentlyinuseandthecorrespondingchemicalcompositionslimitsarespecifiedinEN575, EN1676andEN1706. Assig

28、nmentsorrevisionsofdesignationsshallbeapprovedbyTechnicalCommitteeCEN/TC132.EN17802:2002(E) 5 4 Rulesforthecodeddesignationofaluminiumalloysandmasteralloys 4.1General AnalloyshallbedesignatedbythesymbolAl,followedbythesymbolsofthemainelementorelements.These symbolsareusuallyfollowedbynumberswhichexp

29、ressthemasspercentcontentsoftheconsideredelements,in accordancewiththerulesshownin4.2.ThesymbolAlshallbeseparatedbyablankspacefromtheremainderof thedesignation. Whenseveralalloyingelementsaredeemedtoberequiredinthedesignation,theyshallbearrangedinorderof decreasingnominalcontents. EXAMPLE1 ENABAlSi5

30、Cu3 Itthesecontentsareequal,thealloyingelementsshallbearrangedinthealphabeticalorderofthesymbols,as specifiedinAnnexA. EXAMPLE2 ENABAlSi12CuMgNi Thechemicalsymbolsforalloyingelementsshallberestrictedtoamaximumoffourelements. EXAMPLE3 ENABAlSi12CuMgNi EXAMPLE4 ENACAlSi12CuMgNi EXAMPLE5 ENAMAlSr10Ti1B

31、0,2 4.2 Rulesfordistinguishingbetweentwoalloysofsimilarcomposition 4.2.1General Thesimplestpossibledesignationshallbeused. Inthecaseofalloyswithsimilarcompositions,thefollowingadditionaldesignationshallbeusedfordistinguishing betweenalloysindecreasingpriority: 4.2.2 Distinguishingbynominalcontent Th

32、ealloyingelementshallbedistinguishedbythenominalcontent(middleoftherange)roundedtothenearest integeror,ifnecessary,tothenearest0,5,or,forcontentslessthan1%tothenearest0,1. EXAMPLE1 ENABAlSi7Mg0,3 EXAMPLE2 ENABAlSi7Mg0,6. 4.2.3 Distinguishingbymainimpurities Themainimpurityorimpuritiesshallbeaddedinp

33、arentheses. EXAMPLE1 ENABAlSi10Mg(Cu) EXAMPLE2 ENABAlSi10Mg(Fe) EXAMPLE3 ENABAlSi9Cu3(Fe)(Zn)EN17802:2002(E) 6 4.2.4 Distinguishingbyasuffix Iftheaboveprovisionisnotsufficientfordifferentiatingbetweenseveralalloys,asuffixshallbeused:(a),(b), (c),accordingtothedateofregistration.Thissuffixshallconsis

34、tofalowercaseletterplacedinparenthesesto avoidconfusionwiththechemicalsymbols. EXAMPLE1 ENABAlSi12(a) EXAMPLE2 ENABAlSi12(b) 4.3 Specialapplicationformasteralloys Asuffix(A)or(B)shallbeusedattheendofthechemicaldesignation,accordingtothelevelofimpurities,i.e.: (A)formasteralloywithlowlevelofimpuritie

35、s; (B)formasteralloywithhighlevelofimpurities.EN17802:2002(E) 7 Annex A (normative) Internationalchemicalsymbols Aluminium Al Molybdenum Mo Silver Ag Sodium Na Boron B Niobium Nb Beryllium Be Nickel Ni Bismuth Bi Phosphorus P Calcium Ca Lead Pb Cadmium Cd RareEarths RE Cerium Ce Antimony Sb Cobalt C

36、o Silicon Si Chromium Cr Tin Sn Copper Cu Strontium Sr Iron Fe Titanium Ti Gallium Ga Vanadium V Lithium Li Zinc Zn Magnesium Mg Zirconium Zr Manganese MnEN17802:2002(E) 8 Bibliography 1 EN576, AluminiumandaluminiumalloysUnalloyedaluminiumingotsforremeltingSpecifications. 2EN 17801, Aluminiumandalum

37、iniumalloysDesignationofalloyedaluminiumingotsforremelting, masteralloysandcastingsPart1:Numericaldesignationsystem.blankBS EN 1780-2:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It p

38、resents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of

39、 BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)2

40、0 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Cus

41、tomer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as Britis

42、h Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give deta

43、ils on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of t

44、hese and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. E