EN 201-2009 en Plastics and rubber machines - Injection moulding machines - Safety requirements《塑料盒橡胶机械 注射模制机械 安全要求》.pdf

1、BS EN 201:2009ICS 83.200NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDPlastics and rubbermachines Injectionmoulding machines Safety requirementsThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 January2010

2、 BSI 2010ISBN 978 0 580 60020 3Amendments/corrigenda issued since publicationDate CommentsBS EN 201:2009National forewordThis British Standard is the UK implementation of EN 201:2009. Itsupersedes BS EN 201:1997 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCom

3、mittee MCE/3/2, Rubber and plastics machine - Safety.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance w

4、ith a British Standard cannot confer immunityfrom legal obligations.BS EN 201:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 201 October 2009 ICS 25.120.20; 83.200 Supersedes EN 201:1997English Version Plastics and rubber machines - Injection moulding machines - Safety requirements Machine

5、s pour les matires plastiques et le caoutchouc - Machines de moulage par injection - Prescriptions de scurit Kunststoff- und Gummimaschinen - Spritzgiemaschinen -Sicherheitsanforderungen This European Standard was approved by CEN on 12 September 2009. CEN members are bound to comply with the CEN/CEN

6、ELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to an

7、y CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.

8、 CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

9、 Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Memb

10、ers. Ref. No. EN 201:2009: EBS EN 201:2009EN 201:2009 (E) 2 Contents Page Foreword 6Introduction .71 Scope 82 Normative references 83 Terms and definitions 104 List of significant hazards . 164.1 General . 164.2 Mould area . 184.3 Clamping mechanism area or area behind the mobile platen . 194.4 Area

11、 of movement of core and ejector drive mechanisms outside both the mould area and the clamping mechanism area . 194.5 Nozzle area 194.6 Plasticising and/or injection unit area 204.7 Discharge area 204.8 Hazards not associated with a particular area of the machine 204.8.1 Whiplash of flexible hoses .

12、 204.8.2 Release of fluids under pressure 204.8.3 Hazards during adjustment and servicing . 214.8.4 Electrical hazards and hazards due to electromagnetic interference . 214.8.5 Thermal hazards . 214.8.6 Hazards generated by noise 214.8.7 Hazards generated by gases, fumes and dusts 214.8.8 Slip, trip

13、 and fall hazards . 214.8.9 Hydraulic and pneumatic systems 214.8.10 Power operated guards 214.9 Additional hazards associated with specific machine design . 224.9.1 Carousel machines . 224.9.2 Shuttle-table machines/machines with sliding lower platen and turn-table machines . 224.9.3 Multi-station

14、machines with mobile injection unit 224.9.4 Cellular foam injection moulding machines 224.10 Additional hazards when using ancillary equipment 224.10.1 Power operated mould changing equipment . 224.10.2 Power operated mould clamping devices 224.10.3 Fluid injectors . 224.10.4 Other ancillary equipme

15、nt . 235 Safety requirements and protective measures 235.1 General . 235.1.1 Emergency stop 235.1.2 Guards . 245.1.3 Electro-sensitive protective equipment (ESPE) in the form of light curtains 255.1.4 Two-hand control devices . 255.1.5 Hold-to run control devices associated with reduced speed of the

16、 dangerous movement . 265.1.6 Pressure sensitive mats, floors and edges 265.1.7 Common requirements for automatic monitoring . 265.1.8 Movements caused by gravity during production 265.2 Mould area . 275.2.1 Hazards due to the closing movement of the platen during production 275.2.2 Sides of the mac

17、hine where a cycle cannot be initiated 28BS EN 201:2009EN 201:2009 (E) 3 5.2.3 Hazards due to movements other than the closing movement of the platen during production 285.2.4 Use of control guards . 305.2.5 Thermal hazards 305.2.6 Additional safety requirements for machines with a downstroking plat

18、en 305.2.7 Additional requirements for machines where whole body access is possible between the interlocking guard or light curtain for the mould area and the mould area itself . 315.2.8 Additional requirements for machines where whole body access is possible to the mould area . 345.2.9 Additional r

19、equirements for machines with L-Type configuration during production 355.3 Clamping mechanism area or area behind the mobile platen 365.3.1 Basic safety requirements 365.3.2 Additional safety requirements for machines with an upstroking platen . 365.4 Area of movement of core and ejector drive mecha

20、nisms outside the mould area and outside the clamping mechanism area . 375.5 Nozzle area . 375.5.1 Mechanical hazards . 375.5.2 Thermal hazards 375.6 Plasticising and/or injection unit area . 385.6.1 Mechanical hazards . 385.6.2 Thermal hazards 385.6.3 Mechanical and/or thermal hazards 395.7 Dischar

21、ge area . 395.8 Safety requirements and/or protective measures against hazards not associated with a particular area of the machine . 405.8.1 Whiplash of flexible hoses . 405.8.2 Release of fluids under pressure . 415.8.3 Hazards during adjustment and servicing 415.8.4 Electrical hazards and hazards

22、 due to electromagnetic interference . 415.8.5 Thermal hazards 415.8.6 Hazards generated by noise . 415.8.7 Hazards generated by gases, fumes and dusts . 425.8.8 Slip, trip and fall hazards 425.8.9 Hydraulic and pneumatic systems 425.8.10 Power operated guards . 425.9 Additional safety requirements

23、and/or protective measures associated with specific machine design . 435.9.1 Carousel machines 435.9.2 Shuttle-table machines / machines with sliding lower platen and turn-table machines . 435.9.3 Multistation machines with mobile injection unit 435.9.4 Cellular foam injection moulding machines . 44

24、5.10 Additional safety requirements and/or protective measures when using ancillary equipment. 445.10.1 Power operated mould changing equipment . 445.10.2 Power operated mould clamping devices . 445.10.3 Fluid injectors 465.10.4 Other ancillary equipment 466 Verification of the safety requirements a

25、nd/or protective measures 477 Information for use 497.1 Instruction handbook 497.1.1 Emergency stop . 497.1.2 Stopping performance 497.1.3 Stopping time . 497.1.4 Light curtains . 497.1.5 Parking brakes . 497.1.6 Moulds and extensions . 507.1.7 Movements of cores and ejectors . 507.1.8 Thermal hazar

26、ds in the mould area . 50BS EN 201:2009EN 201:2009 (E) 4 7.1.9 Maintenance operations on vertical machines 507.1.10 Machines where whole body access is possible 507.1.11 Presence detecting devices in the mould area 507.1.12 Plasticising and/or injection unit 507.1.13 Machines with L-Type configurati

27、on 517.1.14 Flexible hose assemblies . 517.1.15 Adjustment and servicing 517.1.16 Exhaust system. 517.1.17 Designated access and working positions 517.1.18 Non-permanent safe means of access . 517.1.19 Automatic feeding of material . 527.1.20 Manual feeding of material 527.1.21 Magnetic mould clampi

28、ng 527.1.22 Ancillary equipment . 537.1.23 Applying ergonomic principles when using ancillary equipment . 537.1.24 Bursting of moulded parts . 537.1.25 Cellular foam injection moulding 537.1.26 Hydraulic system cleaning 537.1.27 Noise emission 547.1.28 Splashing hazards where two-hand control device

29、s are used 547.2 Marking 54Annex A (normative) Movable interlocking guards type I (non-electrical axis) 56A.1 Interlocking function 57A.2 Quality of the components 57Annex B (normative) Movable interlocking guards type II (non-electrical axis) . 58B.1 Interlocking function 59B.2 Quality of the compo

30、nents 59B.3 Automatic monitoring requirements. 59Annex C (normative) Movable interlocking guards type III (non-electrical axis) 60C.1 Movable interlocking guard with three position detectors 60C.1.1 Interlocking function 61C.1.2 Quality of the components 61C.1.3 Additional requirements for the secon

31、d shut-off device in Figure C.1 . 61C.2 Movable interlocking guard with two position detectors . 62C.2.1 Interlocking function 63C.2.2 Quality of the components 63C.2.3 Additional requirements for the second shut-off device in Figure C.2 . 63C.3 Automatic monitoring requirements. 63C.3.1 Common requ

32、irements (see also 5.1.7) 63C.3.2 Additional automatic monitoring requirements (Figure C.1) . 64C.3.3 Additional automatic monitoring requirements (Figure C.2) . 64Annex D (normative) Movable interlocking guards type I (electrical axis) 65D.1 Principle of interlocking corresponding to type I, using

33、one electromechanical component . 65D.2 Principle of interlocking corresponding to type I, using the motor control unit . 67Annex E (normative) Movable interlocking guards type II (electrical axis) 69E.1 Principle of interlocking corresponding to type II, using one electromechanical component . 69E.

34、2 Principle of interlocking corresponding to type II, using the motor control unit (version A) 71E.3 Principle of interlocking corresponding to type II, using the motor control unit (version B) 73Annex F (normative) Movable interlocking guards type III (electrical axis) . 75F.1 Principle of interloc

35、king corresponding to type III, using electromechanical components . 75F.2 Principle of interlocking corresponding to type III, using one electromechanical component and the motor control unit. 77F.3 Principle of interlocking corresponding to type III, using the motor control unit (version A) 79BS E

36、N 201:2009EN 201:2009 (E) 5 F.4 Principle of interlocking corresponding to type III, using the motor control unit (version B) . 81Annex G (normative) Electro-sensitive protective equipment in the form of a light curtain 83G.1 Mode of operation of the light curtain . 83G.2 Automatic monitoring requir

37、ements . 84Annex H (normative) Two-hand control device . 85H.1 Mode of operation of the two hand control 85H.2 Automatic monitoring requirements . 86Annex J (normative) Acknowledgement systems . 87J.1 Single acknowledgement system 87J.2 Double acknowledgment system . 87Annex K (normative) Noise test

38、 code . 88K.1 Introduction 88K.2 Measurement of the A-weighted emission sound pressure level at the usual operating position . 88K.3 Determination of the A-weighted sound power level 88K.4 Installation and mounting conditions for noise measurement. 88K.5 Operating conditions 89K.5.1 Plastic processi

39、ng machines . 89K.5.2 Rubber processing machines 90K.6 Information to be reported 90K.7 Declaration and verification of noise emission values . 91Annex L (normative) Warning signs . 92Annex M (normative) Use of proportional valves for the platen movement . 93M.1 Design . 93M.2 Mode of operation . 93

40、Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC . 94Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC 95Bibliography 96BS EN 201:2009EN 201:2009 (E) 6

41、 Foreword This document (EN 201:2009) has been prepared by Technical Committee CEN/TC 145 “Plastics and rubber machines”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at

42、 the latest by April 2010, and conflicting national standards shall be withdrawn at the latest by April 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or

43、all such patent rights. This document supersedes EN 201:1997. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informativ

44、e Annexes ZA and ZB, which are integral parts of this document. A transition period of one year is permitted following the publication of this document during which the manufacturer may choose to apply either version of the standard. In addition to EN 201:1997, requirements for machines with electri

45、cal axes, machines with L-type configuration, cellular foam injection moulding machines, machines with fluid injectors, and machines safeguarded by light curtains or two-hand control devices are included. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the

46、following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,

47、 Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 201:2009EN 201:2009 (E) 7 Introduction This document is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the

48、 scope of this document. When provisions of this type C standard are different from those which are stated in type A and B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built in accordance with the provisions of this type C standard. BS EN 201:2009EN 201:2009 (E) 8 1 Scope This European Standard specifies the essential safety requirements for injection moulding machines for the processing of plastics and/or rubber. All