EN 2032-001-2014 en Aerospace series - Metallic materials - Part 001 Conventional designation《航空航天系列 金属材料 第001部分 常规设计》.pdf

1、BSI Standards PublicationBS EN 2032-001:2014Aerospace series MetallicmaterialsPart 001: Conventional designationBS EN 2032-001:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 2032-001:2014.It supersedes BS EN 2032-1:2002 which is withdrawn.The UK participat

2、ion in its preparation was entrusted to TechnicalCommittee ACE/61, Metallic materials for aerospace purposes.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users

3、are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 81517 1ICS 49.025.05; 49.025.15Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the author

4、ity of theStandards Policy and Strategy Committee on 31 August 2014.Amendments issued since publicationDate Text affectedBS EN 2032-001:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2032-001 July 2014 ICS 49.025.05; 49.025.15 Supersedes EN 2032-1:2001English Version Aerospace series - Met

5、allic materials - Part 001: Conventional designation Srie arospatiale - Matriaux mtalliques - Partie 001 : Dsignation conventionnelle Luft- und Raumfahrt - Metallische Werkstoffe - Teil 001: Konventionelle Bezeichnung This European Standard was approved by CEN on 21 March 2013. CEN members are bound

6、 to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN

7、-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre ha

8、s the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lu

9、xembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Bru

10、ssels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2032-001:2014 EBS EN 2032-001:2014EN 2032-001:2014 (E) 2 Contents Page 1 Scope 5 2 Normative references 5 3 Terms and definitions .5 4 Principle 7 4.1 General 7 4.2 ASD-STA

11、N designation .7 4.3 Method of production or use 8 4.4 Basic chemical composition (base metal excluded)8 4.5 Mass content of an alloying element .8 5 Structural materials .8 5.1 Unalloyed metals .8 5.2 Nickel base or cobalt base alloys 9 5.3 Aluminium base materials 9 5.4 Steels . 10 5.5 Commerciall

12、y pure titanium and titanium base alloys . 10 5.6 Magnesium base alloys 11 5.7 Other metal base alloys . 12 6 Joining materials 13 6.1 Filler metals for welding . 13 6.2 Filler metals for brazing . 13 7 Allocation and registration of the conventional designations . 18 7.1 Allocation . 18 7.2 Registr

13、ation of the conventional designations . 18 Annex A (informative) General 19 Annex B (informative) ASD-STAN designation: Nickel base or cobalt base alloy (Not applicable to new standard and revision) . 20 Annex C (informative) ASD-STAN designation: Steels (Not applicable to new standards and revisio

14、ns) . 23 C.1 Unalloyed steels 23 C.2 Low alloy steels 24 C.3 High alloy ferritic and martensitic steels . 25 C.4 High alloy austenitic and austenitic-ferritic steels 26 Annex D (informative) ASD-STAN designation: Commercially pure titanium and titanium base alloy (Not applicable to new standards and

15、 revisions) . 28 D.1 Commercially pure titanium 28 D.2 Titanium base alloy. 28 BS EN 2032-001:2014EN 2032-001:2014 (E) 3 Foreword This document (EN 2032-001:2014) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes c

16、arried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, eithe

17、r by publication of an identical text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at the latest by January 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/o

18、r CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 2032-1:2001. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, B

19、elgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Swi

20、tzerland, Turkey and the United Kingdom. BS EN 2032-001:2014EN 2032-001:2014 (E) 4 Introduction This standard is part of the series of EN metallic materials standards for aerospace applications. The general organization of this series is described in EN 4258. BS EN 2032-001:2014EN 2032-001:2014 (E)

21、5 1 Scope This European Standard specifies the rules for establishing the conventional designation of unalloyed, commercially pure and alloyed metallic materials used for aerospace applications. NOTE Information relating to former ASD-STAN designations for nickel base or cobalt base alloys, steel, c

22、ommercially pure titanium and titanium base alloys, is contained in Annex (informative). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. F

23、or undated references, the latest edition of the referenced document (including any amendments) applies. EN 1780-1, Aluminium and aluminium alloys Designation of alloyed aluminium ingots for remelting, master alloys and castings Part 1: Numerical designation system EN 4258, Aerospace series Metallic

24、 materials General organization of standardization - Links between types of EN standards and their use EN 4500-001, Aerospace series Metallic materials Rules for drafting and presentation of material standards - Part 001: General rules EN 10020, Definition and classification of grades of steel EN 10

25、027-1, Designation systems for steels Part 1: Steel names EN 10027-2, Designation systems for steels Part 2: Numerical system TR 3900, Aerospace series Metallic materials Relationship between AECMA designation systems 1) ISO 80000-9, Quantities and units Part 9: Physical chemistry and molecular phys

26、ics 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 structural material material used for the manufacture of a specific component of an aerospace system, structure or engine 3.2 alloying element see EN 4500-001 3.3 unalloyed metal metal that

27、contains no alloying elements and with a total impurity content less than 0,5 % For the applications of this standard, a so-called “commercially pure” metal is not considered as unalloyed metal and its designation shall be chosen according to the same rules as those of the relevant metallic alloys 1

28、) Published as ASD-STAN Technical Report at the date of publication of this standard. http:/www.asd-stan.org/ BS EN 2032-001:2014EN 2032-001:2014 (E) 6 3.4 cast material material resulting from the bulk solidification of a previously homogeneous liquid metal 3.5 cast + wrought material material resu

29、lting from further solid state working of cast material 3.6 powder metallurgy material material divided into solid particles at least in the first step of its solid state processing 3.7 steel iron base material alloyed with carbon the content of which is generally lower than 2 % 3.8 unalloyed steel

30、see EN 10020 3.9 low alloy steel steel alloyed with one or several metallic elements, the mean value of the content of each being less than 5 % and the content of at least one being higher than the carbon content 3.10 high alloy, ferritic or martensitic steel steel alloyed with one or several metall

31、ic elements, the mean value of the content of at least one of which is equal to or higher than 5 % and the crystalline structure of which contains less than 40 % of austenite in its condition of use 3.11 high alloy, austenitic or austenitic-ferritic steel steel alloyed with one or several metallic e

32、lements, the mean value of the content of at least one of which is equal to or higher than 5 % and the crystalline structure of which contains 40 % austenite or more in its condition of use 3.12 joining material material used for the metallurgical assembly of several parts of an aerospace system 3.1

33、3 filler metals for welding joining material solidus temperature of which is close to or the same as the solidus temperature of the materials to be joined 3.14 filler metals for brazing joining material solidus temperature of which is significantly lower than the solidus temperature of the materials

34、 to be joined BS EN 2032-001:2014EN 2032-001:2014 (E) 7 4 Principle 4.1 General The conventional designation defines by one series of characters (letters, figures, dashes) all metallic materials having the same basic chemical composition without taking into account: any option concerning other eleme

35、nts than alloying elements, the method of melting, the heat treatment, the form. NOTE The method of melting may induce variations in the mass content of one or several alloying elements. These variations are not considered significant and shall not be taken into consideration. 4.2 ASD-STAN designati

36、on ASD-STAN designation is not applicable to new standard and revision for: nickel base or cobalt base alloys (see 5.2, EN 10027-1 and EN 10027-2), steels (see 5.4, EN 10027-1 and EN 10027-2), commercially pure titanium and titanium base alloys (see 5.5). The ASD-STAN designation of each material co

37、mprises nine characters divided into three groups: A group of three characters consisting of: the symbol of the base metal in accordance with ISO 80000-9, but written entirely in capital letters, dash(es) for completion to three characters. A group of five characters: the first three characters indi

38、cate the alloying elements (one, two or three) considered significant (with the exception of all aluminium base materials). If the chemical composition is such that there is only one or two alloying elements, the remaining character(s) is (are) a zero. The use of this group of three characters is de

39、fined in each of the relevant following clauses. In addition, one character indicates the method of production for structural materials or the use for joining materials (see 4.3). the last two of this group of five characters (or the last character in the case of cast aluminium base alloys, see 5.3.

40、2) form a serial number starting at 01 (or 1 in the case of cast aluminium base alloys, see 5.3.2). This serial number shall be changed every time the first three and the last five characters already allocated do not fit the new basic chemical composition to be designated. The conventional designati

41、on is unique for one basic chemical composition, except for certain filler metals for brazing (see 6.2.2.2 and 6.2.2.3). BS EN 2032-001:2014EN 2032-001:2014 (E) 8 4.3 Method of production or use A capital letter from the following series: Structural material - C for cast material, P for cast + wroug

42、ht material, R for powder metallurgy material. Joining material W for welding material, B for brazing material. 4.4 Basic chemical composition (base metal excluded) A group of five digits: 4.4.1 In the case of unalloyed materials, the first three digits indicate information as in 5.1. 4.4.2 In the c

43、ase of metallic alloys, with the exception of all aluminium base materials (see 5.3), the first three digits indicate the alloying elements (one, two or three) considered significant (see 5.1, 5.2, Annex B, Annex C, Annex D and 5.6 to 6.2). If the chemical composition is such that there is only one

44、or two alloying elements, the remaining digit(s) is (are) a zero. The use of this group of three digits is defined in each of the relevant following clauses. 4.4.3 The last two of this group of five digits form a serial number starting at 01. This serial number shall be changed every time the first

45、three and the last five digits already allocated do not fit the new basic chemical composition to be designated. NOTE In consequence of 4.1, 4.2 and 4.3, except for certain brazing materials (see 6.2.2.1 and 6.2.2.2) the first three and the last five digits correspond to one and only one basic chemi

46、cal composition, whatever the letter used as the fourth digit. 4.5 Mass content of an alloying element It shall be taken as the arithmetical mean of the limits of its range. If two alloying elements have the same mass content, they shall be written according to the alphabetical order of their intern

47、ational symbol. 5 Structural materials 5.1 Unalloyed metals With the exception of all aluminium base materials (see 5.3), the group of five digits of the designation comprises from left to right: a single capital letter U symbolic of this category, a number indicating the percentage of base metal af

48、ter the decimal point, completed with zero if necessary, last two digits as serial numbers (This serial number shall be changed every time the first three and the last five characters already allocated do not fit the new basic chemical composition to be designated). BS EN 2032-001:2014EN 2032-001:20

49、14 (E) 9 EXAMPLE Cast + wrought copper 99,97 % pure NOTE In this example, the chemical composition is unique and the serial number can only be 01. 5.2 Nickel base or cobalt base alloys The names and numbers of the alloys are formed in accordance with EN 10027-1 and EN 10027-2 respectively. a) name: The preceding chemical symbols indicate the main alloy elements and the figure immediately following indicates the average content of these alloys subsequently followed by the symbol for the other added imp