EN 2266-003-2005 en Aerospace series - Cables electrical for general purpose - Operating temperatures between - 55 degrees C and 200 degrees C - Part 003 Ink jet printable - Produc.pdf

1、BRITISH STANDARD AEROSPACE SERIESBS EN2266-003:2005Cables, electrical, for general purpose Operating temperatures between S55 C and 200 C Part 003: Ink jet printable Product standardThe European Standard EN 2266-003:2005 has the status of a British StandardICS 49.060g49g50g3g38g50g51g60g44g49g42g3g5

2、8g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 2266-003:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 April

3、 2006 BSI 2006ISBN 0 580 48095 XNational forewordThis British Standard is the official English language version of EN 2266-003:2005. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/2,

4、 Aerospace Cables, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI C

5、atalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its

6、correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests inf

7、ormed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover.The BSI copyright notice displayed in this document indica

8、tes when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2266-003 December 2005 ICS 49.060 English Version Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 C and

9、 200 C - Part 003: Ink jet printable - Product standard Srie arospatiale - Cbles, lectriques, dusage gnral - Tempratures de fonctionnement comprises entre - 55 C et 200 C - Partie 003 : Marquables au jet dencre - Norme de produit Luft- und Raumfahrt - Leitungen, elektrisch, fr allgemeine Verwendung

10、- Betriebstemperaturen zwischen - 55 C und 200 C - Teil 003: Tintenstrahl bedruckbar - Produktnorm This European Standard was approved by CEN on 30 September 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standa

11、rd the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, G

12、erman). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic,

13、Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION

14、EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2266-003:2005: E2 Contents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Terms and

15、definitions.4 4 Materials and construction.4 5 Required characteristics 5 6 Quality assurance .8 7 Designation .8 8 Identification and marking8 9 Packaging, labelling and delivery lengths 8 10 Technical specification.8 EN 2266-003:20053 Foreword This European Standard (EN 2266-003:2005) has been pre

16、pared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries

17、of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting national standards shall be withdrawn at the latest by June 2006. Attention i

18、s drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the fo

19、llowing countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Swe

20、den, Switzerland and the United Kingdom. EN 2266-003:20054 1 Scope This standard specifies the characteristics of ink jet printable electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between 55 C and 200 C. It shall also be possible to mark these cable

21、s by hot stamp printing. These markings shall be in accordance with EN 3838. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the refer

22、enced document (including any amendments) applies. EN 2083, Aerospace series Copper or copper alloy conductors for electrical cables Product standard. EN 2084, Aerospace series Cables, electric, single-core, general purpose, with conductors in copper or copper alloy Technical specification. 1) EN 22

23、66-002, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 200 C Part 002: General. EN 3475-100*, Aerospace series Cables, electrical, aircraft use Test methods Part 100: General.EN 3838, Aerospace series Requirements and tests on user-applied markings o

24、naircraft electrical cables. 1)EN 9133, Aerospace series Quality management systems Qualification Procedure for aerospace standard parts. 3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 3475-100 apply. 4 Materials and construction 4.1 Materials Conduc

25、tor: see EN 2266-002. Insulation: first layer polyimide with total thickness (nominal value) of 30 m, coated on both sides with a layer 2,5 m thick of fluorocarbon; direction of winding immaterial - overlap 51 % min.; * And all its parts quoted in Table 2. 1) Published as AECMA Prestandard at the da

26、te of publication of this standard. EN 2266-003:20055 second layer polyimide with total thickness (nominal value) of 30 m, coated on both sides with a layer 2,5 m thick of fluorocarbon - running in opposite direction to first layer - overlap 51 % min.; top coat of dispersion fluorocarbon, wall thick

27、ness 10 m min., including the necessary additives for the acceptance of user-applied ink jet marking. If these cables are required for use as cores in multicore cables, the top coat shall be of dispersion fluorocarbon. 4.2 Construction See EN 2083 and Table 1. Table 1 Code for nominal section Nomina

28、l section AWG a Linear resistance at 20 C External diameter Mass mm2/km max. mm min. mm max. kg/km max. 001 0,15 26 160,0 0,75 0,84 2,00 002 0,25 24 114,0 0,85 0,94 2,65 004 0,4 22 60,0 0,96 1,09 3,90 006 0,6 20 33,2 1,20 1,34 6,55 010 1 18 21,1 1,44 1,59 9,90 012 1,2 16 14,5 1,65 1,84 13,90 020 2 1

29、4 10,9 1,90 2,10 18,50 030 3 12 6,80 2,38 2,60 29,70 050 5 10 4,20 3,00 3,19 46,50 051 b5 10 4,10 3,03 3,25 48,30aAWG = Closest American Wire Gage. bFlexible construction which may be used as an alternative. 4.3 Number of cores See EN 2266-002. 4.4 Colour coding of cores See EN 2266-002. 5 Required

30、characteristics According to EN 2084 and EN 3475-100. See Table 2. EN 2266-003:20056 Table 2 EN 3475- Test Details 201 Visual examination Applicable 202 Mass Applicable; see Table 1. 203 Dimensions Applicable; see Table 1. 301 Ohmic resistance per unit length Applicable; see Table 1. 302 Voltage pro

31、of test Applicable 303 Insulation resistance Applicable 304 Surface resistance Applicable 305 Overload resistance Applicable T1= (250 5) C; T2= (400 5) C 306 Continuity of conductors Applicable 401 Accelerated ageing Applicable Temperature (250 5) C 402 Shrinkage and delamination Applicable Temperat

32、ure (250 5) C Maximum shrinkage at each end of cable: 0,15 mm2to 0,60 mm2: 0,80 mm 1,00 mm2to 1,20 mm2: 1,00 mm 2,00 mm2to 5,00 mm2: 1,20 mm 403 Delamination and blocking Applicable Temperature (250 5) C 404 Thermal shock Applicable Temperature (250 5) C Maximum shrinkage at each end of cable: 0,15

33、mm2to 0,60 mm2: 0,80 mm 1,00 mm2to 1,20 mm2: 1,00 mm 2,00 mm2to 5,00 mm2: 1,20 mm 405 Bending at ambient temperature Applicable 406 Cold bend test Applicable 407 Flammability Applicable Extinguishing time: 3 s max. 408 Fire resistance Not applicable 409 Air-excluded ageing Not applicable 410 Thermal

34、 endurance Applicable 40 000 h (temperature 200 C) 411 Resistance to fluids Applicable continued EN 2266-003:20057 Table 2 (concluded) EN 3475- Test Details 501 Dynamic cut-through Applicable Temperatures (20 3) C and (200 5) C Cut-through force Nominal section mm220 C N 200 C N 0,15 0,25 0,40 0,60

35、1,00 1,20 2,00 3,00 5,00 70 85 110 140 140 150 150 165 180 50 70 100 130 130 140 140 150 160 502 Notch propagation Applicable Notch depth: 40 m 503 Scrape abrasion Applicable Test force on needle for cables: 0,15 mm2= 5 N 0,25 mm2to 0,60 mm2= 8 N 1,00 mm2to 1,20 mm2= 10 N 2,00 mm2to 5,00 mm2= 12 N 5

36、04 Torsion Applicable T3= (200 5) C ; T4= (250 5) C 505 Tensile test on conductors and strands Applicable 506 Plating continuity Applicable 507 Adherence of plating Applicable 508 Plating thickness Applicable 509 Solderability Not applicable 601 Smoke density Applicable 602 Toxicity Applicable 603 R

37、esistance to wet arc tracking Not applicable 604 Resistance to dry arc propagation Not applicable 701 Strippability and adherence of insulation to the conductor Applicable 702 Screen pushback capability Not applicable 703 Permanence of manufacturers marking Applicable EN 2266-003:20058 6 Quality ass

38、urance See EN 9133. 7 Designation EXAMPLE Description block CABLE, ELECTRICAL Identity block EN2266-003A010P Number of this standard Code letter for number of cores (see EN 2266-002, Table 1) Code for nominal section (see Table 1) Code letter for colour coding of cores (see EN 2266-002, Tables 2 and

39、 3) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 8 Identification and marking See EN 2266-002. 9 Packaging, labelling and delivery lengths See EN 2084. 10 Technical specification See EN 2084. EN 2266-003:2005blankBS EN 2266-003:2005BSI389 Ch

40、iswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by

41、amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standar

42、d would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the

43、 latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In r

44、esponse to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards throu

45、gh its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of B

46、SI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online a

47、ccess to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standa

48、rdization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not precl

49、ude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)