EN 2266-008-2015 en Aerospace series - Cables electrical for general purpose - Operating temperatures between -55 and 200 - Part 008 DRP (pair) DRT (3 cores) DRQ (4 cores) family m.pdf

1、BSI Standards PublicationBS EN 2266-008:2015Aerospace series Cables,electrical, for general purpose Operating temperaturesbetween -55 C and 200 CPart 008: DRP (pair) DRT (3 cores) DRQ (4cores) family, multicore UV laser printablejacketed cable Product standardBS EN 2266-008:2015 BRITISH STANDARDNati

2、onal forewordThis British Standard is the UK implementation of EN 2266-008:2015.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to

3、 its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 88565 5ICS 49.060Compliance with a British Standard ca

4、nnot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2015.Amendments issued since publicationDate Text affectedBS EN 2266-008:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2266-008 July

5、2015 ICS 49.060 English Version Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 C and 200 C - Part 008: DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable - Product standard Srie arospatiale - Cbles, lectriques,

6、dusage gnral - Tempratures de fonctionnement comprises entre -55 C et 200 C - Partie 008: DRP (paire) DRT (tierce) DRQ (quarte) multiconducteurs gains marquables au laser UV - Norme de produit Luft- und Raumfahrt - Leitungen, elektrisch, fr allgemeine Verwendung - Betriebstemperaturen zwischen -55 C

7、 und 200 C - Teil 008: DRP- (zweiadrig), DRT- (dreiadrig), DRQ-(vieradrig) Leitungsfamilie, mehradrige, UV-Laser-bedruckbare, ummantelte Leitungen - Produktnorm This European Standard was approved by CEN on 7 February 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations wh

8、ich stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This E

9、uropean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members

10、 are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

11、 Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form a

12、nd by any means reserved worldwide for CEN national Members. Ref. No. EN 2266-008:2015 EBS EN 2266-008:2015EN 2266-008:2015 (E) 2 Contents Page European foreword .3 1 Scope 4 2 Normative references 4 3 Terms, definitions and symbols .5 4 Materials and construction .5 5 Required characteristics .7 6

13、Quality assurance 8 7 Designation 9 8 Identification and marking 9 9 Packaging, labelling and delivery lengths 9 10 Technical specification .9 BS EN 2266-008:2015EN 2266-008:2015 (E) 3 European foreword This document (EN 2266-008:2015) has been prepared by the Aerospace and Defence Industries Associ

14、ation of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to C

15、EN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2016, and conflicting national standards shall be withdrawn at the latest by January 2016. Attention is drawn to the possibility that so

16、me of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to imp

17、lement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romani

18、a, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 2266-008:2015EN 2266-008:2015 (E) 4 1 Scope This European Standard specifies the characteristics of UV laser printable multicore jacketed electrical cables for use in the on-board electrical systems of aircraft a

19、t operating temperatures between 55 C and 200 C. It shall also be possible to mark these cables by qualified compatible marking. These markings shall be in accordance with EN 3838. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and ar

20、e indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2083, Aerospace series Copper and copper alloys conductors for electrical cables Product standard EN

21、 2235, Aerospace series Single and multicore electrical cables, screened and jacketed EN 2267-002, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 260 C Part 002: General EN 2267-009, Aerospace series Cables, electrical, for general purpose Operating

22、temperatures between 55 C and 260 C Part 009: DRA family, single and multicore assembly Product standard EN 3475-100, Aerospace series Cables, electrical, aircraft use Test methods Part 100: General EN 3475-201, Aerospace series Cables, electrical, aircraft use Test methods Part 201: Visual examinat

23、ion EN 3475-202, Aerospace series Cables, electrical, aircraft use Test methods Part 202: Mass EN 3475-203, Aerospace series Cables, electrical, aircraft use Test methods Part 203: Dimensions EN 3475-301, Aerospace series Cables, electrical, aircraft use Test methods Part 301: Ohmic resistance per u

24、nit length EN 3475-302, Aerospace series Cable, electrical, aircraft use Test methods Part 302: Voltage proof test EN 3475-303, Aerospace series Cables, electrical, aircraft use Test methods Part 303: Insulation resistance EN 3475-304, Aerospace series Cables, electrical, aircraft use Test methods P

25、art 304: Surface resistance EN 3475-306, Aerospace series Cables, electrical, aircraft use Test methods Part 306: Continuity of conductors EN 3475-401, Aerospace series Cables, electrical, aircraft use Test Methods Part 401: Accelerated ageing EN 3475-402, Aerospace series Cables, electrical, aircra

26、ft use Test methods Part 402: Shrinkage and delamination EN 3475-403, Aerospace series Cables, electrical, aircraft use Test methods Part 403: Delamination and blocking EN 3475-404, Aerospace series Cables, electrical, aircraft use Test methods Part 404: Thermal shock EN 3475-405, Aerospace series C

27、ables, electrical, aircraft use Test methods Part 405: Bending at ambient temperature BS EN 2266-008:2015EN 2266-008:2015 (E) 5 EN 3475-406, Aerospace series Cables, electrical, aircraft use Test methods Part 406: Cold bend test EN 3475-407, Aerospace series Cables, electrical, aircraft use Test met

28、hods Part 407 : Flammability EN 3475-411, Aerospace series Cables, electrical, aircraft use Test methods Part 411: Resistance to fluids EN 3475-412, Aerospace series Cables, electrical, aircraft use Test methods Part 412: Humidity resistance EN 3475-505, Aerospace series Cables, electrical, aircraft

29、 use Test methods Part 505: Tensile test on conductors and strands EN 3475-506, Aerospace series Cables, electrical, aircraft use Test methods Part 506: Plating continuity EN 3475-507, Aerospace series Cables, electrical, aircraft use Test methods Part 507: Adherence of plating EN 3475-508, Aerospac

30、e series Cables, electrical, aircraft use Test methods Part 508: Plating thickness EN 3475-601, Aerospace series Cables, electrical, aircraft use Test methods Part 601: Smoke density EN 3475-602, Aerospace series Cables, electrical, aircraft use Test methods Part 602: Toxicity EN 3475-701, Aerospace

31、 series Cables, electrical, aircraft use Test methods Part 701: Strippability and adherence of insulation to the conductor EN 3475-703, Aerospace series Cables, electrical, aircraft use Test methods Part 703: Permanence of manufacturers marking EN 3475-705, Aerospace series Cables, electrical, aircr

32、aft use Test methods Part 705: Contrast measurement EN 3475-706, Aerospace series Cables, electrical, aircraft use Test methods Part 706: Laser markability EN 3838, Aerospace series Requirements and tests on user-applied markings on aircraft electrical cables EN 4434, Aerospace series Copper or copp

33、er alloy lightweight conductors for electrical cables Product standard (Normal and tight tolerances) EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts 3 Terms, definitions and symbols For the purposes of this document, the terms, definitions an

34、d symbols given in EN 3475-100 apply. 4 Materials and construction 4.1 Materials These cables shall consist of the following: cores according to EN 2267-009, number of cores 2 to 4. BS EN 2266-008:2015EN 2266-008:2015 (E) 6 2 to 4 core cables shall be twisted together according to EN 2235. Outer jac

35、ket: shall be defined to satisfy all required characteristics of Clause 5. 4.2 Construction See EN 4434, EN 2083 and Table 1. Table 1 Number of cores Code for nominal section Nominal section AWG aLinear resistance at 20 C External diameter Mass mm2/km mm kg/km max. max. max. 2 001 0,15 26 165 1,86 5

36、,01 002 0,25 24 117 2,10 6,54 004 0,4 22 61,7 2,39 9,47 006 0,6 20 34,1 2,91 15,28 010 1 18 21,7 3,44 22,90 012 1,2 16 14,9 4,02 31,78 020 2 14 11,2 4,67 42,61 3 001 0,15 26 165 1,99 7,28 002 0,25 24 117 2,24 9,50 004 0,4 22 61,7 2,55 13,91 006 0,6 20 34,1 3,12 22,55 010 1 18 21,7 3,68 33,91 012 1,2

37、 16 14,9 4,30 47,15 020 2 14 11,2 5,01 63,34 030 3 12 6,99 5,98 99,57 4 001 0,15 26 165 2,22 9,56 002 0,25 24 117 2,49 12,48 004 0,4 22 61,7 2,87 18,34 006 0,6 20 34,1 3,50 29,82 010 1 18 21,7 4,15 44,92 012 1,2 16 14,9 4,80 62,52 020 2 14 11,2 5,48 84,06 aAWG = Closest American Wire Gage. BS EN 226

38、6-008:2015EN 2266-008:2015 (E) 7 4.3 Colours coding of cores See EN 2267-002. See EN 2235, 4.3.2 for cabling. 5 Required characteristics Tests according to EN 3475-100. See Table 2. Table 2 (1 of 2) EN 3475- Designation of the test Details 201 Visual examination Applicable 202 Mass Applicable, see T

39、able 1. 203 Dimensions Applicable, see Table 1. 301 Ohmic resistance per unit length Applicable, see Table 1. 302 Voltage proof test Applicable 303 Insulation resistance Applicable 304 Surface resistance Applicable 305 Overload resistance Not applicable 306 Continuity of conductors Applicable 401 Ac

40、celerated ageing Applicable Temperature (250 5) C 402 Shrinkage and delamination Applicable Temperature (250 5) C Maximum shrinkage at each end of cable: for jacket: not applicable, for core insulation: see EN 2267-009. 403 Delamination and blocking Applicable Temperature (250 5) C 404 Thermal shock

41、 Applicable Temperature (250 5) C Maximum shrinkage at each end of cable: for jacket: not applicable, for core insulation: see EN 2267-009. 405 Bending at ambient temperature Applicable 406 Cold bend test Applicable 407 Flammability Applicable Extinguishing time: max. 3 s BS EN 2266-008:2015EN 2266-

42、008:2015 (E) 8 Table 2 (2 of 2) EN 3475- Designation of the test Details 408 Fire resistance Not applicable 409 Air-excluded ageing Not applicable 410 Thermal endurance Not applicable 411 Resistance to fluids Applicable 412 Humidity resistance Applicable 501 Dynamic cut-through Not applicable 502 No

43、tch propagation Not applicable 503 Scrape abrasion Not applicable 504 Torsion Not applicable 505 Tensile test on conductors and strands Applicable 506 Plating continuity Applicable 507 Adherence of plating Applicable 508 Plating thickness Applicable 509 Solderability Not applicable 511 Cable-to-cabl

44、e abrasion Not applicable 512 Flexure endurance Not applicable 601 Smoke density Applicable 602 Toxicity Applicable 603 Resistance to wet arc tracking Not applicable 604 Resistance to dry arc propagation Not applicable 605 Wet short circuit test Not applicable 701 Strippability and adherence of insu

45、lation to the conductor Applicable 702 Screen pushback capability Not applicable 703 Permanence of manufacturers marking Applicable On cylindrical cable only Load: 1 N 704 Flexibility Not applicable 705 Contrast measurement Applicable K 50 % 706 Laser markability Applicable UV laser 6 Quality assura

46、nce See EN 9133. BS EN 2266-008:2015EN 2266-008:2015 (E) 9 7 Designation EXAMPLE Description block CABLE, ELECTRICAL Identity block EN2266-008B010P Number of this standard Code letter for number of cores (see EN 2266-002, Table 1) Code for nominal section (see Table 1) Code letter for colour coding

47、of cores (see EN 2266-002, Table 2) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 8 Identification and marking See EN 2266-002. 9 Packaging, labelling and delivery lengths See EN 2235. 10 Technical specification See EN 2235. This page deliber

48、ately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Sta

49、ndards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards