EN 2336-2005 en Aerospace series - Bearings spherical plain in steel with assembly slots - Dimensions and loads《航天航空系列 金属材料的试验方法 环境温度抗拉试验》.pdf

1、BRITISH STANDARD AEROSPACE SERIESBS EN 2336:2005Bearings, spherical plain in steel with assembly slots Dimensions and loadsThe European Standard EN 2336:2005 has the status of a British StandardICS 49.035g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g

2、3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 2336:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2006 BSI 31 January 2006ISBN 0 580 47223 XNational forewordThis

3、British Standard is the official English language version of EN 2336:2005. It supersedes BS EN 2336:1990 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee ACE/12, Aerospace fasteners and fastening systems, which has the responsibility to: A list of organ

4、izations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspon

5、dence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of it

6、self confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and pro

7、mulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date Comme

8、ntsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 2336December 2005ICS 49.035 Supersedes EN 2336:1988 English VersionAerospace series - Bearings, spherical plain in steel withassembly slots - Dimensions and loadsSrie arospatiale - Rotules lisses en acier avec encochesdassemblage - Dimensions et c

9、hargesLuft- und Raumfahrt - Gelenklager aus Stahl mit Einfhrnut- Mae und BelastungenThis European Standard was approved by CEN on 26 October 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a

10、national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in

11、any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finlan

12、d, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUN

13、GManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2336:2005: EEN 2336:20052 Contents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Terms and definitions.4 4 Symbols

14、and abbreviations5 5 Required characteristics 5 6 Designation .9 7 Marking 9 8 Technical specification.9 EN 2336:20053 Foreword This European Standard (EN 2336:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes car

15、ried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, eithe

16、r by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting national standards shall be withdrawn at the latest by June 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENE

17、LEC shall not be held responsible for identifying any or all such patent rights. This European Standard supersedes EN 2336:1988. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria,

18、Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 2336:20054 1 Scope This standa

19、rd specifies the characteristics of spherical plain bearings in steel, with assembly slots, with or without lubrication holes and grooves, intended for use in fixed or moving parts of aircraft structure and control mechanisms. They may be used in the temperature range from 54 C to 150 C. However, as

20、 they are lubricated with the following greases (see EN 2337): ester type very high pressure grease (code letter A), operating range from 73 C to 121 C or, synthetic hydrocarbon type very high pressure grease general purpose (code letter B), operating range from 54 C to 177 C. Their field of applica

21、tion when lubricated with grease code letter A is limited to 121 C. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced doc

22、ument (including any amendments) applies. ISO 1132-1, Rolling bearings Tolerances Part 1: Terms and definitions. EN 2031, Steel FE-PL31 Hardened and tempered Bars Aerospace series. 1)EN 2337, Aerospace series Spherical plain bearings Technical specification. EN 2424, Aerospace series Marking of aero

23、space products. EN 2491, Aerospace series Molybdenum disulphide dry lubricants Coating methods. 3 Terms and definitions For the purposes of this standard, the terms and definitions given in ISO 1132-1 apply. 1) Published as AECMA Standard at the date of publication of this standard. EN 2336:2005 5 4

24、 Symbols and abbreviations The following symbols for tolerances are used: dmp: single plane mean bore diameter deviation ds: deviation of a single bore diameter Dmp: single plane mean outside diameter deviation Ds: deviation of a single outside diameter : angle of tilt of the outer ring with respect

25、 to the inner ring, the spherical surface of the outer ring being completely in contact with the inner ring 5 Required characteristics 5.1 Configuration, dimensions and masses According to Figures 1 and 2 and Tables 1 and 2. The dimensions are expressed in millimetres and apply after surface treatme

26、nt. 5.2 Surface roughness According to Figure 1. The values are expressed in micrometres and apply before surface treatment. a0,4 for spherical surface with dry-film lubricant; 0,2 for non-coated surface Figure 1 EN 2336:20056 Code letter E: Bearing without lubrication holes and groove Code letter F

27、: Bearing with lubrication holes and groove on inner ring Code letter G: Bearing with lubrication holes and groove on outer ring Figure 2 Table 1 d B C D Tolerances m d1K r1r2 Mass code number nom. 0 0,06 0 0,25 dmpdsDmpDsmin. min.ag 05 5 06 6 6 4 14 8 10 0,3to 0,6 0,4 to 0,7 13 4 08 8 8 5 16 80135+

28、10 13 15 7 10 10 9 6 19 102+13 16 0,5 to 0,8 12 11 12 12 10 7 22 15 18 11 15 15 15 12 9 26 90156+18 22 0,5to 0,8 0,6 to 1 8 28 17 17 14 10 30 80113+20 25 10 44 20 20 16 12 35 24 29 9 60 25 25 20 16 42 29 36 7 105 30 30 22 18 47 100133+110198+34 41 145 35 35 25 20 55 39 47 0,7to 1,1 0,9 to 1,3 6 210

29、40 40 28 22 62 45 53 285 45 45 32 25 68 50 60 7 420 50 50 35 28 75 120153+1302310+55 66 515 60 60 44 36 90 66 80 1 050 70 70 49 40 105 77 92 1 510 80 80 55 45 120 150194+1502813+88 105 1,2to 1,7 1,4 to 1,8 6 2 250 aMaximum values for the user EN 2336:20057 Table 2 d E aE1 aF F1 F2 G G1 G2 code numbe

30、r nom. 0,2 0,2 0,2 0,2 0,2 + 0,1 0 + 0,1 0 + 0,1 0 05 5 06 6 08 8 10 10 12 12 Without lubrication holes and groove 15 15 1,5 2,2 1,75 17 17 2,8 2,5 20 20 2 2,9 3 3 1 2 25 25 1,5 2 4 2,5 30 30 4,5 35 35 2 2,5 5 40 40 5,5 3 45 45 4 6,2 1,5 3,5 50 50 2,5 2,5 4 5 3 7 2 4 60 60 6 9 2,5 5 70 70 3 4,5 10 5

31、,5 80 80 4 3 5 8 4 12 3,5 7,5 aThree holes at intervals of 120 on the periphery. 5.3 Clearances and loads See Table 3. EN 2336:2005 8 Table 3 Internal clearances m Permissible static loads kN axial radial max. d Code number normal code letter N reduced code letter P normal code letter N normal code

32、letter P radialaCsaxial bCa05 12 0,68 06 16 0,9 08 26 1,5 10 45 2,3 12 60 3,2 15 90 5,55 17 110 6,95 20 160 9,85 25 270 18,15 30 30 to 60 1 to 30 15 8 380 25,16 35 500 30 40 630 36,66 45 820 48,1 50 40 to 80 1 to 40 20 10 1 000 60,96 60 1 600 102,76 70 2 000 127,8 80 50 to 100 1 to 50 25 15 2 600 18

33、2,8 aThese loads can only be applied at 90 with respect to the opening of the slots. bThese loads shall be applied to the outer ring from the side opposite to the slots. 5.4 Materials Inner ring: according to EN 2031, 60 HRC to 63 HRC Outer ring: according to EN 2031, 58 HRC to 62 HRC 5.5 Surface tr

34、eatment Dry-film lubricant on the spherical surface of inner or outer ring (antiscoring treatment) applied according to EN 2491. EN 2336:2005 9 6 Designation EXAMPLE Description block PLAIN BEARING Identity block EN2336AP15E Number of this standard Grease code letter (see Clause 1) Internal clearanc

35、es code letter (see Table 3) Diameter code number d (see Table 1) Lubrication holes and grooves code letter (see Figure 2) NOTE If necessary, the code 9005 shall be placed between the description block and the identity block. 7 Marking EN 2424, style A The marking position is at the manufacturers op

36、tion. 8 Technical specification See EN 2337 BS EN 2336:2005BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is inco

37、rporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone

38、 finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service

39、called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Stan

40、dards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of

41、 information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111

42、. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (

43、0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the c

44、opyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or oth

45、erwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.