EN 2542-2008 en Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Bar and wire - De Less Than or Equal to 40 mm - For prevailing torque nuts《航空航天系列 钢FE-PL1502(25CrMo4) 退火的棒.pdf

1、BS EN 2542:2008ICS 49.025.10NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Steel FE-PL1502(25CrMo4) Annealed Bar and wire De 40 mm Forprevailing torque nutsThis British Standardwas published under theauthority of the StandardsPolicy and Strateg

2、yCommittee on 31 March2009 BSI 2009ISBN 978 0 580 65821 1Amendments/corrigenda issued since publicationDate CommentsBS EN 2542:2008National forewordThis British Standard is the UK implementation of EN 2542:2008.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/61/-/15,

3、Metallic materials for aerospace purposes.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a Briti

4、sh Standard cannot confer immunityfrom legal obligations.BS EN 2542:2008EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2542 November 2008 ICS 49.025.10 English Version Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Bar and wire - De 40 mm - For prevailing torque nuts Srie arospatial

5、e - Acier FE-PL1502 (25CrMo4) - Recuit -Barres et fils - De 40 mm - Pour crous freinage interne par dformation Luft- und Raumfahrt - Stahl FE-PL1502 (25CrMo4) - Geglht - Stangen und Drhte - De 40 mm - Fr klemmende Sicherungsmuttern This European Standard was approved by CEN on 24 August 2008. CEN me

6、mbers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applica

7、tion to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has

8、 the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Por

9、tugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any me

10、ans reserved worldwide for CEN national Members. Ref. No. EN 2542:2008: EBS EN 2542:2008EN 2542:2008 (E) 2 Foreword This document (EN 2542:2008) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in acco

11、rdance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication o

12、f an identical text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by May 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be hel

13、d responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland

14、, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 2542:2008EN 2542:2008 (E) 3 Introduction This standard is part of the series

15、 of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5. 1 Scope This standard specifies the requirements relating to: Steel FE-PL1502 (25CrMo4) Annealed Bar and wire

16、De 40 mm For prevailing torque nuts for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced documen

17、t (including any amendments) applies. EN 2600, Aerospace series Designation of metallic semi-finished products Rules. 1) EN 4258, Aerospace series Metallic materials General organization of standardization Links between types of EN standards and their use. EN 4500-5, Aerospace series Metallic materi

18、als Rules for drafting and presentation of material standards Part 5: Specific rules for steels. 1) EN 4700-2, Aerospace series Steel and heat resisting alloys Wrought products Technical specification Part 2: Bar and section. 1) EN 9133, Aerospace series Quality management systems Qualification proc

19、edure for aerospace standard parts. 1) Published as ASD Prestandard at the date of publication of this standard. BS EN 2542:2008EN 2542:2008 (E) 4 1 Material designation Steel FE-PL1502 (25CrMo4) Element C Si Mn P S Cr Mo Ni Fe 2 min. 0,22 0,10 0,50 0,90 0,15 Chemical composition % max. 0,29 0,35 0,

20、80 0,020 0,015 1,20 0,25 0,30 Base 3 Method of melting Air melted 4.1 Form Bar and wire 4.2 Method of production 4.3 Limit dimension(s) mm De 40 5 Technical specification EN 4700-2 Delivery condition Annealed 6.1 Heat treatment 6.2 Delivery condition code A Use condition Delivery condition 7 Heat tr

21、eatment Characteristics 8.1 Test sample(s) 8.2 Test piece(s) 8.3 Heat treatment Annealed Reference on a washer a 2 mm (see line 29) 9 Dimensions concerned mm 40 10 Thickness of cladding on each face % 11 Direction of test piece 12 Temperature C Ambient13 Proof stress Rp0,2MPa* 14 Strength RmMPa* 15

22、Elongation A % 16 T Reduction of area Z % 17 Hardness HRB 82 40 HRC 43 390 HV5 430 18 Shear strength RcMPa* 19 Bending k 20 Impact strength 21 Temperature C 22 Time h 23 Stress aMPa* 24 Elongation a % 25 Rupture stress RMPa* 26 C Elongation at rupture A % 27 Notes (see line 98) BS EN 2542:2008EN 254

23、2:2008 (E) 5 29 Step quenched in a salt bath + 850 C 860 C a salt bath quenched 365C / AC or other equivalent heat treatment 97 Designation The rules governing the designation of semi-finished products are indicated in standard EN 2600. When the codified designation is used, the identification code

24、shall be as follows: EN2542 U XX -Material standard number Letter code (see 6.2) Appropriate dimensional standard code (see 5.3) Data concerning dimension (see EN 2600) 98 Notes * 1 MPa = 1 N/mm2. a Depth of decarburization admissible e 0,2 mm. Carburization or total decarburization is not permitted

25、. 99 Typical use Low alloy steel for nuts BS EN 2542:2008EN 2542:2008 (E) 6 100 Product qualification See EN 9133. Qualification programme to be agreed between manufacturer and purchaser. BS EN 2542:2008This page has been intentionally left blank BS EN2542:2008BSI GroupHeadquarters 389Chiswick High

26、Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.Revision

27、sBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity w

28、hile usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscriber

29、s automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the

30、 BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European an

31、dinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing

32、members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to

33、 British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except a

34、spermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the cours

35、e of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: