EN 2593-001-2014 en Aerospace series - Bases for 10 A electromagnetic plug-in relays two and four poles double thrown - Part 001 Technical specification《航空航天系列 10个电磁式插入式继电器基地 2个和4个.pdf

1、BSI Standards PublicationBS EN 2593-001:2014Aerospace series Bases for10 A electromagnetic plug-in relays, two and four polesdouble thrownPart 001: Technical specificationBS EN 2593-001:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 2593-001:2014.The UK pa

2、rticipation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions o

3、f a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 87665 3ICS 49.060Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the

4、authority of theStandards Policy and Strategy Committee on 31 December 2014.Amendments issued since publicationDate Text affectedBS EN 2593-001:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2593-001 December 2014 ICS 49.060 English Version Aerospace series - Bases for 10 A electromagnetic

5、 plug-in relays, two and four poles double thrown - Part 001: Technical specification Srie arospatiale - Socles pour relais lectromagntiques 10 A, embrochables, deux et quatre ples inverseurs - Partie 001: Spcification technique Luft- und Raumfahrt - Fassungen fr steckbare, elektromagnetische Relais

6、, 10 A, zwei- und vierpolige Wechselschalter - Teil 001: Technische LieferbedingungenThis European Standard was approved by CEN on 22 November 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status o

7、f a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German

8、). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia,

9、Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

10、 Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 25

11、93-001:2014 EBS EN 2593-001:2014EN 2593-001:2014 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 4 2 Normative references 4 3 Terms and definitions .5 4 Design .5 5 Description .6 6 Definition drawings and mass 7 7 Qualification tests 7 8 Quality assurance 9 9 Designation and marking . 12 10

12、Delivery conditions . 12 11 Packaging 12 12 Storage . 12 BS EN 2593-001:2014EN 2593-001:2014 (E) 3 Foreword This document (EN 2593-001:2014) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordan

13、ce with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an

14、 identical text or by endorsement, at the latest by June 2015, and conflicting national standards shall be withdrawn at the latest by June 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held

15、responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

16、Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 2593-001:2014EN 2593-0

17、01:2014 (E) 4 Introduction The relay bases defined by this standard are derived from MIL-S-12883/40 and MIL-S-12883/41, latest issue. 1 Scope This European Standard specifies the characteristics, installation and mounting dimensions for plug-in relay bases for use with two and four poles double thro

18、w relays in accordance with EN 2548-001. Relay bases in accordance with this standard shall be used at ambient temperatures between 70 C and 125 C and at altitudes up to 25 000 m. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are

19、 indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2349 (all parts), Aerospace series Requirements and test procedures for switching devices 1)EN 2548-0

20、01, Aerospace series Relays, electromagnetic, 10 A (resistive load), with or without suppressor, plug-in type, two and four poles double throw Part 001: Technical specification 2)EN 2593-003, Aerospace series Bases for 10 A electromagnetic plug-in relays, two and four poles double throw Part 003: Ac

21、cording to EN 2548-003 Base with non-captive fixation stud, metric Dimensions Product standard 2) EN 2593-004, Aerospace series Bases for 10 A electromagnetic plug-in relays, two and four poles double throw Part 004: According to EN 2548-004 Base with melded-in fixation stud, unified Dimensions Prod

22、uct standard 2)EN 2593-005, Aerospace series Bases for 10 A electromagnetic plug-in relays, two and four poles double throw Part 005: According to EN 2548-005 Base with melded-in fixation stud, metric Dimensions Product standard 2)EN 3155-017, Aerospace series Electrical contacts used in elements of

23、 connection Part 017: Contacts, electrical, relay base, female, type A, crimp, class P Product standard MIL-S-12883/40, Socket, plug-in electronic components, socket for MIL-R-6106 and MIL-R-83726 relays, square pattern 3) MIL-S-12883/41, Socket, plug-in electronic components, socket for MIL-R-6106

24、relays 3)1)Published as ASD-STAN Prestandard at the date of publication of this standard by Aerospace and Defence Industries Association of Europe-Standardization (ASD-STAN) (www.asd-stan.org).2)In preparation at the date of publication of this standard.3)Published as DoD National (US) Mil. Departme

25、nt of Defense (http:/www.defenselink.mil/).BS EN 2593-001:2014EN 2593-001:2014 (E) 5 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 2349-100 apply. 4 Design 4.1 General The construction of the relay bases shall be such, that the associated components

26、, under any circumstances, cannot be separated during its normal operational life. The retaining clip shall ensure a correct and permanent holding of the crimp contacts. 4.2 Dimensions See EN 2593-003, EN 2593-004 and EN 2593-005. 4.3 Crimp contacts for electrical connections See product standards.

27、4.4 Cables See product standards. 4.5 Mechanical characteristics 4.5.1 General See product standards. 4.5.2 Mounting torque (hardware) See product standards. 4.5.3 Mass (including crimp contact and hardware) See product standards. 4.5.4 Insertion force See product standards. 4.5.5 Extraction force S

28、ee product standards. 4.6 Sealing plug 4.6.1 General See product standards. BS EN 2593-001:2014EN 2593-001:2014 (E) 6 4.6.2 Configurations See product standards. 4.6.3 Dimensions See product standards. 4.6.4 Quantities See product standards. 4.7 Insertion and extraction tools 4.7.1 General See produ

29、ct standards. 4.7.2 Plastic tool See product standards. 4.7.3 Metal tool See product standards. 4.8 Metal parts All metal parts used shall meet the requirements of EN 2349-100. The materials of the hardware (nuts and lock-washers) shall be non-magnetic corrosion resistance steel. 5 Description 5.1 M

30、aterials/Features The relay base assembly consists of: socket body: the material shall be a thermoplast, non-flammable, according to EN 2349-100 and this specification; sealing rubber: the material shall be silicon rubber, non-flammable, according to EN 2349-100 and this specification. The sealing r

31、ubber shall seal wires with external diameters as shown in the product standard; crimp contacts: in accordance with EN 3155-017. The crimp contacts shall be selected to accommodate cables as defined in 4.3. The finish of the crimp contacts shall be: gold-plated Thickness: 1,27 m min. 5.2 Interface s

32、eal The relay and base interface shall be sealed by a silicon rubber. The rubber prevents any environmental influence such as fluids between: relay and base; base and wiring. BS EN 2593-001:2014EN 2593-001:2014 (E) 7 The rubber shall provide an additional electrical isolation between relay terminals

33、 and housing. The hardness of the rubber shall not cause any damage or mechanical deformations when tightening the relay on its base. The silicon rubber shall be a part of the plug-in relays in accordance with EN 2548-001. 5.3 Polarizing holes 5.3.1 Two-pole bases The relay bases shall be provided w

34、ith polarizing holes to accept the polarizing pins used on the two-pole relays only. The shape of the polarizing holes shall accept the polarizing pins used on the 28 V d.c. and 115 V a.c. coil relays of EN 2548-001. The purpose of the polarizing pins and holes is to prevent installation of 28 V d.c

35、. or 115 V a.c. coil relays into the non-mating relay base. The polarizing pin shall ensure the correct installation of the relay to its base. 5.3.2 Four-pole bases The keying of the four-pole d.c. and a.c. coil relay bases shall be provided by different coil terminal positions. They shall also ensu

36、re installation of relay on its base in one position only. On a four-pole version this fool proofing shall be ensured by the contact pins position. 6 Definition drawings and mass For the dimensions and mechanical characteristics, reference is made to the product standards. 7 Qualification tests The

37、relay bases shall meet the applicable requirements of EN 2349-100 as shown in Table 1. The qualification test shall be performed together with the mating relay. BS EN 2593-001:2014EN 2593-001:2014 (E) 8 Table 1 Qualification tests EN 2349- Designation of the test Requirements 201 Visual inspection S

38、ee product standard. 202 Dimensions See product standard. 501 Strength of attachment bolts See product standard. 504 Contact flexibility and resistance to elongation Applicable 413 Vibration, sinusoidal See product standard. 413 Vibration, non-sinusoidal See product standard. 414 Shock See product s

39、tandard. 415 Acceleration See product standard. 411 Temperature change Applicable 402 Corrosion, salt spray Applicable 407 Cold, low air pressure and moist heat Applicable 409 Ozone resistance Applicable 410 Attack by mould Applicable 405 Resistance to chemicals Applicable 302 Insulation resistance

40、See product standard. 303 Dielectric strength See product standard. 307 Contact voltage drop See product standard. 306 Overload (a.c. and d.c.) aApplicable 317 Switching performance aApplicable 602 Circuit breaker compatibility (10 A thermal circuit breaker) aContact load resistive A Load duration m

41、ax. 15 1 h 50 5 s 100 1,2 s 250 0,2 s 350 0,1 s 503 Mating and unmating forces EN 2548-XXXX2X: 36 N EN 2548-XXXX4X: 36 N 502 Robustness of terminations Gold plating : 1,27 m min. aTo be tested with the mating relay. BS EN 2593-001:2014EN 2593-001:2014 (E) 9 8 Quality assurance 8.1 General In order t

42、o show evidence to meet the requirements of EN 2349-100 and this specification, the manufacturer is responsible for: the selection of suitable materials; establishment of manufacturing and control process; performance of qualification tests (see Table 1); maintaining the qualification by periodic re

43、tention of qualification (see Table 5); performing final inspection tests (see Table 3); performing batch acceptance tests (see Table 4). The manufacturer shall maintain documentation and/or records to show evidence at any time that the products manufactured according to product standards meet the r

44、equired quality level. The documentation shall be maintained by the manufacturer for a period of five years minimum. 8.2 Qualification procedure 8.2.1 General The test samples shall be series production units, selected by random from a batch. All test results shall be recorded. 8.2.2 Test sequence T

45、he qualification test samples shall be in accordance with Table 5, considering the requirements as per Table 1. In case one sample fails to meet the requirements, it shall be replaced by a new test sample and the whole test sequence related to the failed unit to be repeated. In case two or more samp

46、les fail to meet the requirement, the qualification test is to be suspended. The qualification authority shall be informed accordingly. The failed units shall be investigated and the necessary corrective actions introduced. The complete qualification program has to be repeated with modified test sam

47、ples. Table 2 Product acceptance test EN 2349- Designation of the test Code 201 Visual inspection A 202 Dimensions 302 Insulation resistance E 303 Dielectric strength F BS EN 2593-001:2014EN 2593-001:2014 (E) 10 8.2.3 Samples preparation Prior starting the qualification test, each sample shall pass

48、the inspection test according to Table 2. The samples shall be numbered. 8.3 Acceptance and inspection conditions 8.3.1 Product acceptance tests Each relay base in accordance with this specification shall be subjected to the product acceptance test according to Table 2 prior to delivery. 8.3.2 Batch

49、 acceptance test In case of contractual requirements, the batch inspection shall be performed. For conditions, reference is made to Table 3. Table 3 Batch acceptance EN 2349- Designation of the test Code Acceptance level AQL 201 Visual inspection A 4,0 202 Dimensions A 4,0 302 Insulation resistance E 1,5 303 Dielectric strength F 1,5 8.4 Maintenance of qualification To maintain type qualification, the qualification test according to Table 4 shall be performed every three years after initial qual