EN 2714-004-2006 en Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 and 260 - Part 004 Screened (braided) and ja.pdf

1、BRITISH STANDARDBS EN 2714-004:2006Aerospace series Cables, electrical, single and multicore for general purpose Operating temperatures between 55 C and 260 C Part 004: Screened (braided) and jacketed, ink jet printable Product standardThe European Standard EN 2714-004:2006 has the status of a Briti

2、sh StandardICS 49.060g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 2714-004:2006This British Standard was published under the authority of t

3、he Standards Policy and Strategy Committee on 31 October 2006 BSI 2006ISBN 0 580 49429 2National forewordThis British Standard was published by BSI. It is the UK implementation of EN 2714-004:2006. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic

4、electrical and fibre optic technology, to Subcommittee ACE/6/-/2, Aerospace Cables.A list of organizations represented on ACE/6/-/2 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its corre

5、ct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2714-004 August 2006 ICS 49.060 English Version Aerospace series - Cables, electrical, single

6、and multicore for general purpose - Operating temperatures between - 55 C and 260 C - Part 004: Screened (braided) and jacketed, ink jet printable - Product standard Srie arospatiale - Cbles, lectriques, mono et multiconducteurs dusage gnral - Tempratures de fonctionnement comprises entre - 55 C et

7、260 C - Partie 004 : Blinds (tresss) et gains, marquables au jet dencre - Norme de produit Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, fr allgemeine Verwendung - Betriebstemperaturen zwischen - 55 C und 260 C - Teil 004: Geschirmt (Umflechtung) und ummantelt, Tintenstrahl bedruc

8、kbar - Produktnorm This European Standard was approved by CEN on 19 May 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibl

9、iographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility o

10、f a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

11、Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050

12、Brussels 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2714-004:2006: E2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Materials and construction.5 5 Required characteristics.7 6 Qua

13、lity assurance8 7 Designation 8 8 Identification and marking 9 9 Packaging, labelling and delivery lengths 9 10 Technical specification .9 EN 2714-004:20063 Foreword This European Standard (EN 2714-004:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardiz

14、ation (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be g

15、iven the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2007, and conflicting national standards shall be withdrawn at the latest by February 2007. Attention is drawn to the possibility that some of the elements of this document

16、 may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Aust

17、ria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 2714-004:20064 1

18、 Scope This standard specifies the characteristics of ink jet printable, single and multicore screened (braided) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between 55 C and 260 C. It shall also be possible to mark these cables by

19、hot stamp printing. These markings shall be in accordance with EN 3838. This standard is not valid for new study. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated refere

20、nces, the latest edition of the referenced document (including any amendments) applies. EN 2083, Aerospace series Copper or copper alloy conductors for electrical cables Product standard. EN 2235, Aerospace series Single and multicore electrical cables, screened and jacketed Technical specification.

21、 EN 2267-003, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 260 C Part 003: Ink jet printable Product standard. EN 2714-002, Aerospace series Cables, electrical, single and multicore for general purpose Operating temperatures between 55 C and 260 C

22、Part 002: Screened and jacketed General. EN 3475-100*, Aerospace series Cables, electrical, aircraft use Test methods Part 100: General. EN 3838, Aerospace series Requirements and tests on user-applied markings on aircraft electrical cables.1)EN 9133, Aerospace series Quality management systems Qual

23、ification Procedure for aerospace standard parts. 3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 3475-100 apply. *And all parts quoted in Table 2. 1) Published as AECMA Prestandard at the date of publication of this standard. EN 2714-004:20065 4 Mate

24、rials and construction 4.1 Materials These cables shall consist of the following: cores according to EN 2267-003; number of cores 1 to 4. 2 to 4-core cables shall be twisted together according to EN 2235. Filler cores shall not be permitted. Screen: nickel-plated copper stranded braid; for dimension

25、s of strands, see Table 1; material according to EN 2083, tests according to EN 3475-100; construction according to EN 2235. Outer jacket: layer of polyimide with total wall thickness (nominal value) of 30 m, coated on both sides with a layer 2,5 m thick of fluorocarbon; direction of winding immater

26、ial - overlap 25 % min.; second layer of polytetrafluoroethylene 0,07 mm thick running in opposite direction to first layer with 51 % min. overlap; top coat of dispersion fluorocarbon, wall thickness 15 m min., including the necessary additives for the acceptance of user-applied ink jet marking. 4.2

27、 Construction See EN 2083 and Table 1. EN 2714-004:20066 Table 1 Number of cores Code for nominal section Nominal section AWG a Linear resistance at 20 C Screen strands nominal diameter External diameter Mass max. max. max. mm2/km mm mm kg/km 001 0,15 26 160,0 0,10 1,74 8,1 002 0,25 24 114,0 0,10 1,

28、84 9,0 004 0,4 22 60,0 0,10 1,99 11,0 006 0,6 20 33,2 0,10 2,24 14,9 010 1 18 21,1 0,10 2,54 19,8 012 1,2 16 14,5 0,10 2,94 26,2 020 2 14 10,9 0,10 3,20 32,7 030 3 12 6,8 0,10 3,70 46,5 050 5 10 4,2 0,12 4,44 70,0 1 051 b5 10 4,1 0,12 4,59 72,6 001 0,15 26 165,00 0,10 2,74 13,5 002 0,25 24 117,00 0,

29、10 2,99 16,0 004 0,4 22 61,70 0,10 3,33 19,6 006 0,6 20 34,10 0,10 3,81 27,7 010 1 18 21,70 0,10 4,34 36,2 012 1,2 16 14,90 0,12 5,20 52,3 020 2 14 11,20 0,12 5,72 64,6 030 3 12 6,99 0,12 6,84 96,0 050 5 10 4,32 0,15 8,30 140,0 2 051 b5 10 4,22 0,15 8,50 145,0 001 0,15 26 165,00 0,10 2,90 17,1 002 0

30、,25 24 117,00 0,10 3,18 20,7 004 0,4 22 61,70 0,10 3,52 26,0 006 0,6 20 34,10 0,12 4,12 38,8 010 1 18 21,70 0,12 4,69 52,1 012 1,2 16 14,90 0,12 5,52 71,9 020 2 14 11,20 0,12 6,21 90,0 3 030 3 12 6,99 0,15 7,48 136,0 001 0,15 26 165,0 0,10 3,21 21,7 002 0,25 24 117,0 0,10 3,46 26,3 004 0,4 22 61,7 0

31、,10 3,84 33,6 006 0,6 20 34,1 0,12 4,50 50,0 010 1 18 21,7 0,12 5,13 66,0 012 1,2 16 14,9 0,15 6,19 97,2 4 020 2 14 11,2 0,15 7,03 122,0 aAWG = Closest American Wire Gage. bFlexible construction which may be used as an alternative. 4.3 Colour coding of cores and jacket See EN 2714-002. EN 2714-004:2

32、0067 5 Required characteristics According to EN 2235 and EN 3475-100. See Table 2. Table 2 EN 3475- Designation of the test Details 201 Visual examination Applicable 202 Mass Applicable; see Table 1. 203 Dimensions Applicable; see Table 1. 301 Ohmic resistance per unit length Applicable; see Table 1

33、. 302 Voltage proof test Applicable 303 Insulation resistance Applicable 304 Surface resistance Applicable 305 Overload resistance Not applicable 401 Accelerated ageing Applicable Temperature (310 5) C 402 Shrinkage and delamination Applicable Temperature (290 5) C Maximum shrinkage at each end of c

34、able: jacket 2 mm, core insulation, see EN 2267-003. 403 Delamination and blocking Applicable Temperature (310 5) C 404 Thermal shock Applicable Temperature (290 5) C Maximum shrinkage: at each end of core: see EN 2267-003; at each end of cable: jacket 2 mm 405 Bending at ambient temperature Applica

35、ble 406 Cold bend test Applicable 407 Flammability Applicable Extinguishing time: 3 s max. 408 Fire resistance Not applicable 409 Air-excluded ageing Not applicable 410 Thermal endurance Applicable 40 000 h (temperature 260 C) 411 Resistance to fluids Applicable 501 Dynamic cut-through Not applicabl

36、e 502 Notch propagation Applicable Notch depth: 40 m continued EN 2714-004:20068 Table 2 (concluded) EN 3475- Designation of the test Details 503 Scrape abrasion Applicable Test force on needle for cables 0,15 mm2to 0,60 mm2= 8 N 1,00 mm2to 1,20 mm2= 10 N 2,00 mm2to 5,00 mm2= 12 N 504 Torsion Not ap

37、plicable 505 Tensile test on conductors and strands Applicable 506 Plating continuity Applicable 507 Adherence of plating Applicable 508 Plating thickness Applicable 509 Solderability Not applicable 601 Smoke density Applicable 602 Toxicity Applicable 603 Resistance to wet arc tracking Not applicabl

38、e 604 Resistance to dry arc propagation Not applicable 701 Strippability and adherence of insulation to the conductor Applicable 702 Screen pushback capability Applicable 703 Permanence of manufacturers marking Applicable 6 Quality assurance See EN 9133. 7 Designation EXAMPLE Description block CABLE

39、, ELECTRICAL Identity block EN2714-004B002F Number of this standard Code letter for number of cores (see EN 2714-002) Code for nominal section (see Table 1) Code letter for colour coding of cores and jacket (see EN 2714-002) NOTE If necessary, the code I9005 shall be placed between the description b

40、lock and the identity block. EN 2714-004:20069 8 Identification and marking See EN 2714-002. 9 Packaging, labelling and delivery lengths See EN 2235. 10 Technical specification See EN 2235. EN 2714-004:2006BS EN 2714-004:2006BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI i

41、s the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure

42、 that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsibl

43、e, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI,

44、international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to

45、 supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Variou

46、s BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive sub

47、stantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be fou

48、nd at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs

49、 and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If t