EN 2997-016-2010 en Aerospace series - Connectors electrical circular coupled by threaded ring fire-resistant or non fire-resistant operating temperatures -65 to 175 continuous 200.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 2997-016:2010Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 C to 175 C contin

2、uous, 200C continuous, 260C peakPart 016: Plug with integrated accessory Product standBS EN 2997-016:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 2997-016:2010.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace a

3、vionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 58

4、0 66829 6ICS 49.060Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2010.Amendments issued since publicationDate Text affectedBS EN 2997-016:2010EUROPEA

5、N STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2997-016 December 2010 ICS 49.060 English Version Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 C to 175C continuous, 200C continuous, 260C peak - Part 016:

6、 Plug with integrated accessory - Product standard Srie arospatiale - Connecteurs lectriques circulaires accouplement par bague filete, rsistant au feu ou non, tempratures dutilisation -65C 175C continu, 200C continu, 260C en pointe - Partie 016: Fiche avec accessoire intgr - Norme de produit Luft-

7、und Raumfahrt - Elektrischer Rundsteckverbinder mit Schraubkupplung, feuerbestndig oder nicht feuerbestndig, Betriebstemperaturen -65 C bis 175 C konstant, 200 C konstant, 260 C Spitze - Teil 016: Freier Steckverbinder mit integriertem Endgehuse - ProduktnormThis European Standard was approved by CE

8、N on 4 September 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standar

9、ds may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and noti

10、fied to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuani

11、a, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN

12、All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2997-016:2010: EBS EN 2997-016:2010EN 2997-016:2010 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions . 54 Required characteristics . 54.1 Dimensions

13、and mass . 54.2 Material, surface treatment . 64.3 Main general characteristics 64.4 Possible combinations of plugs and receptacles 65 Designation 66 Marking . 87 Technical specification . 83 Foreword This document (EN 2997-016:2010) has been prepared by the Aerospace and Defence Industries Associat

14、ion of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This Eu

15、ropean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at the latest by June 2011. Attention is drawn to the possibility that some of the element

16、s of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europ

17、ean Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and th

18、e United Kingdom. BS EN 2997-016:2010EN 2997-016:2010 (E) BS EN 2997-016:2010EN 2997-016:2010 (E) 4 1 Scope This European Standard specifies the characteristics of plugs with integrated accessory in the family of circular electrical connectors coupled by threaded ring. It applies to the class define

19、d in Table 2. For contacts, filler plugs associated with this plug, see EN 2997-002. For receptacles, see EN 2997-003 to EN 2997-007, EN 2997-014, EN 2997-015 and for protective covers, see EN 2997-010. 2 Normative references The following referenced documents are indispensable for the application o

20、f this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2997-001, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resist

21、ant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 001: Technical specificationEN 2997-002, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C c

22、ontinuous, 260 C peak Part 002: Specification of performance and contact arrangements EN 2997-003, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 003

23、: Square flange receptacle Product standard EN 2997-004, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 004: Jam-nut mounted receptacle Product stand

24、ard EN 2997-005, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 005: Hermetic square flange receptacle Product standard EN 2997-006, Aerospace series

25、 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 006: Hermetic jam-nut mounted receptacle Product standardEN 2997-007, Aerospace series Connectors, electrical, circula

26、r, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 007: Hermetic receptacle with round flange attached by welding or brazing Product standardEN 2997-010, Aerospace series Connectors, electrical, circul

27、ar, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 010: Protective cover for plug Product standard EN 2997-014, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resist

28、ant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 014: Square flange receptacle with intregrated accessory Product standard EN 2997-015, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire

29、-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 015: Jam-nut mounted receptacle with intregrated accessory Product standard EN 3155-002, Aerospace series Electrical contacts used in elements of connection Part 002: List and utilization of contacts 5 3 T

30、erms and definitions For the purposes of this document, the terms and definitions given in EN 2997-001 apply. 4 Required characteristics 4.1 Dimensions and mass See Figure 1 and Table 1. Dimensions are in millimetres; they apply after surface treatment. Key 1 See EN 2997-001. 2 Identity marking and

31、blue rear release indicator band here Figure 1 BS EN 2997-016:2010EN 2997-016:2010 (E) BS EN 2997-016:2010EN 2997-016:2010 (E) 6 Table 1 Housing size C Mass agmax. Stainless steel Aluminium alloy 08 21,30 45 18 10 24,90 62 26 12 29,60 71 30 14 31,24 85 46 16 34,42 100 48 18 37,34 113 52 20 41,91 125

32、 56 22 44,07 141 76 24 47,24 157 79 28 55,24 192 124 aMass without contact. 4.2 Material, surface treatment See Table 2. 4.3 Main general characteristics See EN 2997-002. 4.4 Possible combinations of plugs and receptacles See EN 2997-002. 5 Designation EXAMPLE Description block ELECTRICAL CONNECTOR,

33、 PLUG Identity block EN2997SEC0898F8 Number of the basic standard Class (see Table 2) Plug with integrated accessory (see EN 2997-002) Housing size and contact arrangement (see EN 2997-002) Type of contact (see Table 3) Polarization (see EN 2997-002) NOTE If necessary, the code I9005 shall be placed

34、 between the description block and the identity block. 7 Table 2 Class Model description W Sealed plug with housing (shell) in olive-green cadmium-plated aluminium alloy, conducting finish, 500 h resistance to salt mist, crimp contacts, maximum operating temperature 175 C continuous WS Sealed plug w

35、ith housing (shell) in olive-green cadmium-plated aluminium alloy, conducting finish, 500 h resistance to salt mist, crimp contacts, with ground-spring-system, maximum operating temperature 175 C continuous K Sealed plug with housing (shell) in passivated stainless steel, 500 h resistance to salt mi

36、st, crimp contacts, fire-resistant, maximum operating temperature 200 C continuous R Sealed plug with housing (shell) in nickel-plated aluminium alloy, 48 h resistance to salt mist, crimp contacts, maximum operating temperature 200 C continuous RS Sealed plug with housing (shell) in nickel-plated al

37、uminium alloy, 48 h resistance to salt mist, crimp contacts, with grounding-spring-system, maximum operating temperature 200 C continuous S Sealed plug with housing (shell) in passivated stainless steel, 500 h resistance to salt mist, crimp contacts, fire-resistant, with grounding-spring-system, max

38、imum operating temperature 200 C continuous KE Sealed plug with housing (shell) in passivated stainless steel, 500 h resistance to salt mist, crimp contacts, fire-resistant, maximum operating temperature 260 C peak KV Sealed plug with housing (shell) in passivated stainless steel, 500 h resistance t

39、o salt mist, crimp contacts, fire-resistant, high vibrations, maximum operating temperature 260 C peak SV Sealed plug with housing (shell) in passivated stainless steel, 500 h resistance to salt mist, crimp contacts, fire-resistant, high vibrations, with grounding-spring-system, maximum operating te

40、mperature 260 C peak SE Sealed plug with housing (shell) in passivated stainless steel, 500 h resistance to salt mist, crimp contacts, fire-resistant, with grounding-spring-system, maximum operating temperature 260 C peak Table 3 Contacts Delivered without contact Delivered with contacts with standa

41、rd barrels aEN 3155-XXXX2222 EN 3155-XXXX2020 EN 3155-XXXX1616 EN 3155-XXXX1212 Delivered with specific contacts size 20 with special barrel aEN 3155-XXXX2018 b Male A M C Female B F D aSee EN 3155-002. bOnly affects size 20 contact arrangements. BS EN 2997-016:2010EN 2997-016:2010 (E) BS EN 2997-01

42、6:2010EN 2997-016:2010 (E) 8 6 Marking Unless there are other specific contractual requirements, the marking shall include: the identity block as defined in Clause 5, except for the 13th (classes W, K, R and S) or 14th(all other classes) character which shall be marked according to Table 4; the date

43、 of manufacture (year, week); the manufacturers name or trade mark. Table 4 13th or 14th character of the identity block For A, M, C a M For B, F, D aF aSee Table 3. 7 Technical specification See EN 2997-001. This page deliberately left blankBSI is the independent national body responsible for prepa

44、ring British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswic

45、k High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices.

46、We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an in

47、dividual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the

48、website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: knowledgecentrebsi