EN 3139-2001 en Aerospace Series - Rivets Solid 100 Degree Countersunk Normal Head in Corrosion Resisting Steel FE-PA11 Passivated Inch Based Series《航空航天系列 基于英寸系列钝化的FE-PA11型耐腐蚀钢100.pdf

1、BRITISH STANDARD AEROSPACE SERIES BS EN 3139:2001 Aerospace series Rivets, solid, 100 countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series The European Standard EN 3139:2001 has the status of a British Standard ICS 49.030.60 NO COPYING WITHOUT BSI PERMISSION E

2、XCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 3139:2001 This British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 September 2001 BSI 07-2001 ISBN 0 580 37382 7 National fore

3、word This British Standard is the official English language version of EN 3139:2001. The UK participation in its preparation was entrusted to Technical Committee ACE/12/1, Aerospace Fastener, Fastening Systems, Details and Parts (International), which has the responsibility to: A list of organizatio

4、ns represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Cor

5、respondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does

6、not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European develop

7、ments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued

8、 since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN3139 June2001 ICS49.030.60 Englishversion AerospaceseriesRivets,solid,100countersunknormalhead, incorrosionresistingsteelFEPA11,passivated,inchbased series SriearospatialeRivetsordinaires,ttefraise100 normale,e

9、nacierrsistantlacorrosionFEPA11, passivs,sriebaseinches LuftundRaumfahrtVollniete,mit100normalem Senkkopf,auskorrosionsbestndigemStahlFEPA11, passiviert,ZollReihe ThisEuropeanStandardwasapprovedbyCENon28February2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatethecon

10、ditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).A

11、versioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy

12、,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENna

13、tionalMembers. Ref.No.EN3139:2001EPage2 EN3139:2001 Foreword ThisEuropeanStandardhasbeenpreparedbytheEuropeanAssociationofAerospaceManufacturers (AECMA). AfterinquiriesandvotescarriedoutinaccordancewiththerulesofthisAssociation,thisStandardhas receivedtheapprovaloftheNationalAssociationsandtheOffici

14、alServicesofthemembercountriesof AECMA,priortoitspresentationtoCEN. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidentical textorbyendorsement,atthelatestbyDecember2001,andconflictingnationalstandardsshallbe withdrawnatthelatestbyDecember2001. AccordingtotheCEN

15、/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark, Finland,France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal, Spain,Sweden,SwitzerlandandtheUnitedKingdom.

16、Page3 EN3139:2001 1 Scope Thisstandardspecifiesthecharacteristicsofsolidrivets,with100countersunknormalhead,incorrosion resistingsteelFEPA11,passivated,inchbasedseries,formaximumoperatingtemperature700C. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreferenceprovisionsfromoth

17、erpublications. Thesenormativereferencesarecitedattheappropriateplacesinthetextandthepublicationsarelisted hereafter.Fordatedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplyto thisEuropeanStandardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthe latestedi

18、tionofthepublicationreferredtoapplies. ISO10299 AerospaceRivets,solidMaterialandmetricseriesidentification EN2000 Aerospace series QualityassuranceENaerospaceproductsApprovalof thequality systemofmanufacturers EN2424 AerospaceseriesMarkingofaerospaceproducts EN 2470 SteelFEPA11SoftenedandcolddrawnWi

19、resforrivets1mm D 10mm Aerospaceseries 1) EN2516 AerospaceseriesPassivationofcorrosionresistingsteelsanddecontaminationofnickel basealloys EN2898 AerospaceseriesCorrosionandheatresistingsteelrivetsTechnicalspecification 2) 3 Requiredcharacteristics 3.1 ConfigurationDimensionsMasses Seefigure1andtabl

20、es1and2. Dimensionsandtolerancesare:expressedinmillimetresandapplyaftersurfacetreatment. 3.2 Material EN2470 3.3 Surfacetreatment EN2516 1) PublishedasAECMAStandardatthedateofpublicationofthisstandard 2) PublishedasAECMAPrestandardatthedateofpublicationofthisstandardPage4 EN3139:2001 Nonradiusedtail

21、 (code“N“) Radiusedtail (code“R“) Key 1 Roundededgepermissiblewithinlimitingdimensions 2 Areaofthisdatumshallbebetween L 5 and L 5 1. 3 Chamferorconvexradius,atmanufacturersoption a Drillstart(code1)optional,shapeoptional Figure1 Table1 L4 D1 a D3 D5 L3 L6 R Diameter code max. min. D2 b min. D4 max.

22、 min. L2 min. 0 0,08 L5 max. min. 0,08 016 1,65 1,55 3 2,7 2,25 0,6 0,03 0,31 2,1 024 2,45 2,35 4,45 4 3,54 1,9 1,6 0,9 0,05 0,38 2,4 0,8 0,5 032 3,25 3,15 5,95 5,35 4,82 2,6 2,3 1,1 0,06 0,47 2,6 1 0,15 036 3,65 3,55 6,7 6 5,46 2,9 2,5 1,3 0,07 0,52 2,9 1,1 0,7 040 4,05 3,94 7,4 6,6 5,79 3,2 2,8 1,

23、4 0,08 0,68 3 1,2 0,8 048 4,85 4,73 8,9 7,95 7,39 3,8 3,3 1,8 0,63 3,8 1,5 1 056 5,65 5,53 10,4 9,3 8,36 4,5 3,9 2,1 0,86 4,1 1,8 1,2 064 6,45 6,33 11,85 10,65 9,64 5,1 4,5 2,4 0,1 0,95 4,4 2,1 1,4 0,25 a D 1 max.mayincreaseby0,03,overlength( L 5 L 2). b MaximumconditionPage5 EN3139:2001 Table2 Diam

24、etercode 016 024 032 036 040 048 056 064 Length a Mass b a Mass b a Mass b a Mass b a Mass b a Mass b a Mass b a Mass b code L 1 0,5 0 NN RN RN RN RN RN RN R 003 3 X 0,058 _ _ _ _ _ _ 004 4 X 0,074 X X 0,207 X X 0,366 X X 0,451 _ _ _ _ 005 5 X 0,090 X X 0,244 X X 0,431 X X 0,521 _ _ _ _ 006 6 X 0,10

25、6 X X 0,281 X X 0,496 X X 0,591 X X 0,749 _ _ _ 007 7 X 0,122 X X 0,318 X X 0,561 X X 0,660 X X 0,848 _ _ _ 008 8 X 0,138 X X 0,355 X X 0,626 X X 0,730 X X 0,946 X X 1,534 _ _ 009 9 X 0,154 X X 0,392 X X 0,691 X X 0,800 X X 1,045 X X 1,680 _ _ 010 10 X 0,170 X X 0,429 X X 0,756 X X 0,870 X X 1,144 X

26、 X 1,826 X X 2,556 X X 3,427 011 11 X 0,186 X X 0,466 X X 0,821 X X 0,940 X X 1,243 X X 1,972 X X 2,754 X X 3,685 012 12 X 0,202 X X 0,503 X X 0,886 X X 1,010 X X 1,341 X X 2,118 X X 2,952 X X 3,943 013 13 X 0,218 X X 0,540 X X 0,951 X X 1,080 X X 1,440 X X 2,264 X X 3,150 X X 4,201 014 14 X 0,234 X

27、 X 0,577 X X 1,016 X X 1,150 X X 1,539 X X 2,410 X X 3,348 X X 4,459 015 15 X 0,250 X X 0,614 X X 1,081 X X 1,220 X X 1,638 X X 2,556 X X 3,546 X X 4,717 016 16 X 0,262 X X 0,651 X X 1,146 X X 1,290 X X 1,736 X X 2,702 X X 3,744 X X 4,975 017 17 _ X 0,688 X X 1,211 X X 1,360 X X 1,835 X X 2,848 X X

28、3,942 X X 5,233 018 18 _ X 0,725 X X 1,276 X X 1,430 X X 1,934 X X 2,994 X X 4,140 X X 5,491 019 19 _ X 0,762 X 1,341 X X 1,500 X X 2,032 X X 3,140 X X 4,338 X X 5,749 020 20 _ X 0,799 X 1,406 X X 1,570 X X 2,131 X X 3,286 X X 4,536 X X 6,007 022 22 _ _ X 1,536 X 1,710 X X 2,328 X X 3,578 X X 4,932

29、X X 6,523 024 24 _ _ X 1,666 X 1,850 X X 2,525 X X 3,870 X X 5,328 X X 7,039 026 26 _ _ _ X 1,990 X 2,722 X X 4,162 X X 5,724 X X 7,555 028 28 _ _ _ X 2,130 X 2,919 X X 4,454 X X 6,120 X X 8,071 030 30 _ _ _ _ X 3,016 X 4,746 X X 6,516 X X 8,587 032 32 _ _ _ _ X 3,313 X 5,038 X X 6,912 X X 9,103 035

30、 35 _ _ _ _ _ X 5,476 X 7,506 X 9,877 040 40 _ _ _ _ _ X 6,206 X 8,496 X 11,167 a Tailendcode(seefigure1) b Approximatevalues(kg/1000pieces),calculatedonthebasisof7,9kg/dm 3 ,givenforinformationpurposesonlyPage6 EN3139:2001 4 Designation EXAMPLE: Descriptionblock RIVET Identityblock EN3139024009R1 N

31、umberofthisstandard Diametercode(seetable1) Lengthcode(seetable2) Tailendcode(seefigure1) Drillstartcode(seefigure1) NOTE Ifnecessary,thecodeI9005shallbeplacedbetweenthedescriptionblockandtheidentityblock. 5 Marking 5.1 Rivet EN2424,styleG 5.2 Material ISO10299 6 Technicalspecification ISO2898,plusE

32、N2000fortheapprovalofmanufacturersBS EN 3139:2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorpor

33、ated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone

34、finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS

35、which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI web

36、site at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and

37、 international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of

38、 BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website

39、at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval

40、 system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations.

41、If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.