EN 3475-403-2002 en Aerospace Series - Cables Electrical Aircraft Use - Test Methods - Part 403 Delamination and Blocking《航空航天系列 飞机用电缆 测试方法 第403部分 脱层和阻塞》.pdf

1、BRITISH STANDARD AEROSPACE SERIES Cables, electrical, aircraft use Test methods Part 403 : Delamination and blocking The European Standard EN 3475-403:2002 has the status of a British Standard ICs 49.060 BS EN 3475403 :2002 BS EN 3475-40312002 Amd. No. National foreword Date Comments This British St

2、andard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 04 February 2002 This British Standard is the official English language version of The UKparticipation in its

3、preparation was entrusted by Technical Committee ACE/6, Aerospace, avionic, electrical and fibre optic technology, to Subcommittee ACE/6/2, Aerospace - Cables, which has the responsibility to: EN 3475-40312002. - - aid enquirers to understand the text; present to the responsible European committee a

4、ny enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cr oss-r e f

5、er enc e s The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled ?International Standards Correspondence Index?, or by using the ?Find? facility of the BSI Standards Electronic

6、Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document

7、 comprises a front cover, an inside front cover, the EN title page, pages 2 and 3 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. O BSI 04 February 2002 ISBN O 580 38365 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3475-403 J

8、anuary 2002 ICs 49.060 English version Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403: Delamination and blocking Srie arospatiale - Cbles lectriques usage aronautique - Mthodes dessai - Partie 403: Collage et dlamination Luft- und Raumfahrt - Elektrische Leitungen fr L

9、uftfahrt, Verwendung - Prfverfahren - Teil 403: Verblocken und Aufblttern This European Standard was approved by CEN on 6 August 2001 CEN members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national sta

10、ndard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other la

11、nguage made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,

12、Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION EUROPISCHES KOMITEE FR NORMUNG COMIT EUROPEN DE NORMALISATION Management Centre: rue de Stassart, 36 B-1050 Brussels O 2002 CEN All rights

13、of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3475-403:2002 E EN 3475-403:2002 (E) Foreword This document (EN 3475-403:2002) has been prepared by the European Association of Aerospace Manufacturers (AECMA). After enquiries and votes carried out

14、 in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN This European Standard shall be given the status of a national standard, either by publ

15、ication of an identical text or by endorsement, at the latest by July 2002, and conflicting national standards shall be withdrawn at the latest by July 2002. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this

16、European Standard : Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 2 EN 3475-403:2002 (E) 1 Scope This standard specifies a method of measuring

17、the delamination and blocking of a finished cable. It shall be used together with EN 3475-100. 2 Normative references This European Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and t

18、he publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 3

19、475-100 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General 3 Preparation of a specimen A specimen of sufficient length shall be taken from insulated conductors or screened and jacketed cables. 4 Apparatus A mandrel whose diameter shall be given in the technical sp

20、ecification and a natural convection oven shall be necessary for this test. 5 Method 5.1 Procedure A specimen shall be wound round a mandrel with two layers superimposed, each consisting of six to eight coils of cable. The cable shall be wound so that the coils are in contact with one another. The e

21、nd of the conductor shall be attached to the mandrel to avoid any unwinding or detachment of coils or layers. The whole unit shall be placed in a natural draught oven at the temperature shown in the product standard for 6 h. After 6 h the unit shall be removed from the oven and cooled for at least 1

22、 h at ambient temperature. 5.2 A check shall then be made to ensure that the cable can easily be unwound from the mandrel and the coils easily separated from one another. Any bonding of layers, either along the insulation or the jacket or at the ends, shall be considered as a defect. For screened ca

23、bles, the cable components shall be easily separated. Any flaring of any layer shall also constitute a failure. Req u i remen ts 3 BS EN 3475-403 12002 BSI 389 Chiswick High Road Lon don w4 4AL BSI is the independent national body responsible for preparing British Standards. It presents the UK view

24、on standards in Europe and at the international level. It is incorporated by Royal Charter. Re vi si ons British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve t

25、he quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax:

26、 +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. T

27、el: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: orders&-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless

28、 otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its prod

29、ucts and services. Contact the Information Centre. Tel: +44 (0)20 8996 71 11. Fax: +44 (0)20 8996 7048. Email: infomi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details ofthese and other benef

30、its contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 700 1. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at htt

31、p:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, ofthe publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system

32、 or transmitted in any form or by any means - electronic, photocopying, recording or otherwise -without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, ofnecessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then the prior written permission ofBSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyright&-.