EN 3506-2001 en Aerospace Series - Hot Rolled Sheets and Plates in Heat Resisting Alloys - Thickness 2 0 mm Less Than or Equal to A Less Than or Equal to 100 mm - Dimensions《航空航天系列.pdf

1、BRITISH STANDARD AEROSPACE SERIES Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm 5 a s 1OOrnrn - Dimensions The European Standard EN 3506:2001 has the status of a British Standard ICs 49.026.99; 49.035; BS EN 3506:2001 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED B

2、Y COPYRIGHT LAW BS EN 3506:ZOOl Amd. No. National foreword Date Comments This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 22 October 2007 P BSI

3、22 October 2001 This British Standard is the official English language version of EN 3506:2001. The UK participation in its preparation was entrusted to Technical Committee ACEI61, Inspection and testing requirements for aerospace metallic materials, which has the responsibility to: - - aid enquirer

4、s to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on th

5、is committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”,

6、or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer

7、 immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued si

8、nce publication I ISBN O 580 37998 1 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3506 September 2001 ICs 49.025.99 English version Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,O mm L a 5 100 mm - Dimensions Serie arospatiale - Tles et plaques paisse

9、s lamines a chaud en alliages rsistant chaud - Epaisseurs 2.0 mm s a s 100 mm - Dimensions Luft- und Raumfahit - Warmgewalzte Bleche und Platten aus hochwarmfesten Legierungen - Dicken 2,O mrn s a 2000 I I 2,O 5 a 5 2.8 I f 0.2 k0.3 I f 0.4 56,O a I 80,O $: 3,5 f 4,5 f 6,O 80,O a 1100,O f 4,O f 6.0

10、* 8.0 5.1.2 Width The tolerance on fixed widths bis + (10+0,001 b) mm. o 5.1.3 Length The tolerance on fixed lengths e is + (IO+ 0,001 a) mm. o 5.2 Geometric tolerances 5.2.1 Squareness 5.2.1.1 Method of measurement See EN 3848. 5.2.1.2 Tolerances The maximum difference in the lengths of the diagona

11、ls shall be (6 + 0,001 AA) mm. 5 EN 3506:ZOOl (E) Thickness 21a1100 5.2.2 Lateral curvature 5.2.2.1 See EN 3848. Method of measurement and symbol Lateral curvature f on: width length 5 0,Ol x b 50.01 x e Thickness 2 1 a 5 100 5.2.3 Flatness 5.2.3.1 See EN 384%. Method of measurement and symbols chor

12、d W = 300 all widths all lengths 5 0,003 x b 5 0,003 x 61 5.2.3.2 Tolerances See table 4. 6 BS EN 3506:2001 BSI 389 Chiswick High Road London w4 4AL BSI - British Standards Institution BSl is the independent national body responsible for preparing British Standards. It presents the UK view on standa

13、rds in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards shouId make sure that they possess the latest amendments or rditions. It is the constant aim of BSI to improve the quality o

14、f our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: O20 8996 7400. BS

15、I offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax:

16、020 8996 7001. Standards are also available from the BSI website at htti,:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI p

17、rovides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. T

18、el: 020 8996 7111 Fax: O20 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: O20 8996 7002. Fax: 020 8996 7001. Fu

19、rther information about BSI is available on the BSI website at u/www.bsw. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1

20、988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise - without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary deta

21、ils such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.