EN 3545-005-2014 en Aerospace series - Connectors electrical rectangular with sealed and non-sealed rear plastic housing locking device operating temperatures -55 to 175 - Part 005.pdf

1、BSI Standards PublicationBS EN 3545-005:2014Aerospace series Connectors, electrical,rectangular, with sealedand non-sealed rear, plastichousing, locking device,operating temperatures -55 Cto 175 CPart 005: Female coding and attachmentSystem for mounting on free housing (plug) Product standardBS EN 3

2、545-005:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 3545-005:2014.It supersedes BS EN 3545-005:2006 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnol

3、ogy.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI Stan

4、dardsLimited 2014ISBN 978 0 580 87668 4ICS 49.060Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2014.Amendments issued since publicationDate Text affe

5、ctedBS EN 3545-005:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3545-005 December 2014 ICS 49.060 Supersedes EN 3545-005:2006English Version Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -5

6、5 C to 175 C - Part 005: Female coding and attachment System for mounting on free housing (plug) - Product standard Srie arospatiale - Connecteurs lectriques, rectangulaires, tanches et non tanches larrire, botier en plastique, verrouillage, tempratures dutilisation -55 C 175 C - Partie 005: Systme

7、de fixation et de codage femelle pour montage sur botier mobile (fiche) - Norme de produit Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere Abdichtung, Plastikgehuse, Verriegelungssystem, Betriebstemperaturen von -55 C bis 175 C - Teil 005: Buchsenkodierung und Befestigu

8、ngszubehr fr ein bewegliches Gehuse (Stecker) This European Standard was approved by CEN on 22 November 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alter

9、ation. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made

10、 by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estoni

11、a, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDA

12、RDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3545-005:2014 EBS EN 3545-005:2014EN 3545

13、-005:2014 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Required characteristics .4 4.1 Dimensions, mass .4 4.2 Material, surface treatment .6 4.3 Main general characteristics 6 5 Designation 7 6 Technical specification .7 BS EN 3545-005:2014EN 3545-0

14、05:2014 (E) 3 Foreword This document (EN 3545-005:2014) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the

15、 National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This document supersedes EN 3545-005:2006. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the

16、latest by June 2015, and conflicting national standards shall be withdrawn at the latest by June 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all suc

17、h patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Maced

18、onia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 3545-005:2014EN 3545-005:2014 (E) 4 1 Scope This European Standa

19、rd specifies the female coding and attachment system for mounting on free housing in the family of rectangular electrical connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from 55 C to 175 C. 2 Normative references The following documents, in who

20、le or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3545-001, Aerospace series Connecto

21、rs, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures 55 C to 175 C Part 001: Technical specification EN 3545-002, Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, o

22、perating temperatures 55 C to 175 C Part 002: Specification of performance and contact arrangements FED-STD-H28/2A:1978, Screw thread standards for federal services 1)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3545-001 apply. 4 Required character

23、istics 4.1 Dimensions, mass The dimensions of attachment system are given in Figure 1. Dimensions and tolerances are in millimetres. Mass: 3 g max. 1)DoD National (US) Mil. Department of Defense (http:/www.defenselink.mil/).BS EN 3545-005:2014EN 3545-005:2014 (E) 5 Key 1 Optional knurling 2 Washer M

24、 2,5 3 0.1120 inch - 40 UNC-3A according to FED-STD-H28 4 Captive screw 5 6 recessed flats 2,3800,06+6 Female body 7 Retaining ring 8 5,4000,05+(groove) 9 0,3 to 0,4 at 30 10 6 flats 8,00,100,05+11 Position indicator (recessed line) 12 0.1120 inch - 40 UNC-3B according to FED-STD-H28 Figure 1 Female

25、 coding and attachment system BS EN 3545-005:2014EN 3545-005:2014 (E) 6 0,025 General concentricity View on F Retaining ring Detail X Figure 2 Retaining ring 4.2 Material, surface treatment Body: steel, cadmium-plated, dichromate sealed Retaining ring: beryllium copper, cadmium-plated, dichromate se

26、aled 4.3 Main general characteristics See EN 3545-002. Tightening torque of the locking screw: 0,06 daNm to 0,10 daNm BS EN 3545-005:2014EN 3545-005:2014 (E) 7 5 Designation EXAMPLE Description block CONNECTOR, CODING SYSTEM Identity block EN3545-005A Number of this standard A: female attachment sys

27、tem for mounting an free housing (plug) NOTE lf necessary, the code I9005 shall be placed between the description block and the identity block. 6 Technical specification See EN 3545-001. This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for prepar

28、ing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road L

29、ondon W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through o

30、ur open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at o

31、r contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and fo

32、reign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standard

33、s Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the pur

34、chase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about

35、 becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sur

36、e your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a Briti

37、sh Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such

38、 as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any me

39、ans electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW