1、BRITISH STANDARD BS EN 357:2004 Glass in building Fire resistant glazed elements with transparent or translucent glass products Classification of fire resistance The European Standard EN 357:2004 has the status of a British Standard ICS 81.040.20 BS EN 357:2004 This British Standard was published un
2、der the authority of the Standards Policy and Strategy Committee on 8 December 2004 BSI 8 December 2004 ISBN 0 580 45021 X National foreword This British Standard is the official English language version of EN 357:2004. It supersedes BS EN 357:2000 which is withdrawn. The UK participation in its pre
3、paration was entrusted by Technical Committee B/520, Glass and glazing in building, to Subcommittee B/520/4, Glass and glazing in building Properties and glazing methods, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secre
4、tary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalo
5、gue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand th
6、e text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an in
7、side front cover, the EN title page, pages 2 to 12, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN
8、357 November 2004 ICS 81.040.20 Supersedes EN 357:2000 English version Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance Verre dans la construction - Elments de construction vitrs rsistant au feu, incluant des produi
9、ts verriers transparent ou translucides - Classification de la rsistance au feu Glas im Bauwesen - Brandschutzverglasungen aus durchsichtigen oder durchscheinenden Glasprodukten - Klassifizierung des Feuerwiderstandes This European Standard was approved by CEN on 10 September 2004. CEN members are b
10、ound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the
11、 Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same statu
12、s as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia
13、, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nat
14、ional Members. Ref. No. EN 357:2004: EEN 357:2004 (E) 2 Contents page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .6 4 Glass products.6 5 Classification7 5.1 General7 5.2 Loadbearing separating fire resistant glazed elements 8 5.3 Non-loadbearing separating fire resistant gl
15、azed elements .8 6 Requirements and test methods9 6.1 General requirements and test methods.9 6.2 Fire resistance requirements and tests.9 Annex A (informative) Typical structures commonly available in the relevant fire resistant glazed elements .11 Bibliography 12 EN 357:2004 (E) 3 Foreword This do
16、cument (EN 357:2004) has been prepared by Technical Committee CEN /TC 129, “Glass in building“, the secretariat of which is held by IBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2005, a
17、nd conflicting national standards shall be withdrawn at the latest by May 2005. This document supersedes EN 357:2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, C
18、yprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 357:2004 (E) 4 1 Scope This document specifi
19、es a classification of transparent or translucent glass products for use in appropriate glazed elements intended specially to provide fire resistance. These glass products are described in European Standards on basic and processed glass products. 2 Normative references The following referenced docum
20、ents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 572-2, Glass in building Basic soda lime silicate glass products Part 2: Flo
21、at glass. EN 572-3, Glass in building Basic soda lime silicate glass products Part 3: Polished wired glass. EN 572-4, Glass in building Basic soda lime silicate glass products Part 4: Drawn sheet glass. EN 572-5, Glass in building Basic soda lime silicate glass products Part 5: Patterned glass. EN 5
22、72-6, Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass. EN 572-7, Glass in building Basic soda lime silicate glass products Part 7: Wired or unwired channel shaped glass. EN 1051-1, Glass in building Glass blocks and glass pavers Part 1: Definitions and descrip
23、tion. EN 1096-1, Glass in building Coated glass Part 1: Definitions and classification. EN 1096-2, Glass in building Coated glass Part 2: Requirements and test methods for class A, B and S coatings. EN 1096-3, Glass in building Coated glass Part 3: Requirements and test methods for class C and D coa
24、tings. EN 1279-1, Glass in building Insulating glass units Part 1: Generalities, dimensional tolerances and rules for the system description. EN 1279-2, Glass in building Insulating glass units Part 2: Long term test method and requirements for moisture penetration. EN 1279-3, Glass in building Insu
25、lating glass units Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances. EN 1279-4, Glass in building Insulating glass units Part 4: Methods of test for the physical attributes of edge seals. EN 1363-1, Fire resistance tests Part 1: General require
26、ments. EN 1363-2, Fire resistance tests Part 2: Alternative and additional procedures. EN 1364-1, Fire resistance tests for non-loadbearing elements Part 1: Walls. EN 1364-2, Fire resistance tests for non-loadbearing elements Part 2: Ceilings. prEN 1364-3, Fire resistance tests for non-loadbearing e
27、lements Part 3: Curtain walling. EN 1365-1, Fire resistance tests for loadbearing elements Part 1: Walls. EN 357:2004 (E) 5 EN 1365-2, Fire resistance tests for loadbearing elements Part 2: Floors and roofs. EN 1634-1, Fire resistance tests for door and shutter assemblies Part 1: Fire doors and shut
28、ters. EN 1634-3, Fire resistance tests for door and shutter assemblies Part 3: Smoke control doors and shutters. EN 1748-1-1, Glass in building Special basic products Borosilicate glasses Part 1-1: Definition and general physical and mechanical properties. EN 1748-2-1, Glass in building - Special ba
29、sic products - Glass ceramics - Part 2-1 Definitions and general physical and mechanical properties. EN 1863-1, Glass in building Heat strengthened soda lime silicate glass Part 1: Definition and description. EN 12150-1, Glass in building Thermally toughened soda lime silicate safety glass Part 1: D
30、efinition and description. EN 12337-1, Glass in building Chemically strengthened soda lime silicate glass Part 1: Definition and description. EN 13024-1, Glass in building Thermally toughened borosilicate safety glass Part 1: Part 1: Definition and description. EN 13501-2, Fire classification of con
31、struction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services. EN 14178-1, Glass in building - Basic alkaline earth silicate glass - Part 1: Float glass. prEN 14179-1, Glass in building - Heat soaked thermally toughened soda l
32、ime silicate safety glass - Part 1: Definition and description. prEN 14321-1, Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description. EN ISO 12543-1, Glass in building Laminated glass and laminated safety glass Part 1: Definitions and descri
33、ption of component parts (ISO 12543-1:1998). EN ISO 12543-2, Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass. EN ISO 12543-3, Glass in building Laminated glass and laminated safety glass Part 3: Laminated glass (ISO 12543-3:1998). EN ISO 12543-4, Glass in
34、building Laminated glass and laminated safety glass Part 4: Test methods for durability (ISO 12543-4:1998). EN ISO 12543-5, Glass in building Laminated glass and laminated safety glass Part 5: Dimensions and edge finishing (ISO 12543-5:1998). EN ISO 12543-6, Glass in building Laminated glass and lam
35、inated safety glass Part 6: Appearance (ISO 12543-6:1998). ISO 834, Fire resistance tests Elements of building construction. EN 357:2004 (E) 6 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 fire resistant glazed element 1)element of construc
36、tion containing one or more transparent or translucent glass products with mounting supports, sealing and fixing material including all particular constructional components proven and classified by testing 2)3.2 fire resistance property defined in the following terms: 3.2.1 loadbearing capacity, R a
37、bility of the element of construction to withstand fire exposure, on one or more faces, for a period of time without any loss of structural stability 3.2.2 integrity, E ability of the element of construction with a separating function to withstand fire exposure on one side only, without the transmis
38、sion of fire to the non-fire side as a result of the passage of significant quantities of flames or hot gases from the fire to the non-fire side, thereby causing ignition of the non-fire exposed surface or any materials adjacent to that surface 3.2.3 reduction of radiation, W ability of the element
39、of construction with a separating function to withstand fire exposure from one side only for a period of time, while the measured radiated heat in front of the glazing is below a specified level 3.2.4 insulation, I ability of the element of construction to withstand fire exposure on one side only, w
40、ithout the transmission of fire as a result of significant conduction of heat from the fire side to the non-fire side, thereby causing ignition of the non- fire exposed surface or any material in contact with that surface and the ability to provide a barrier to heat sufficient to protect people near
41、 the element of construction for the relevant classification period 3.2.5 smoke control, S ability of the element of construction to reduce the passage of hot or cold gases or smoke from one side to the other 3.2.6 self closing, C ability of the fire door or shutter to close an opening by means of a
42、 closing mechanism each time the door or shutter is opened or in the event of smoke 4 Glass products Products according to this document include the following (they are specified in the documents referred to) float glass (see EN 572-2) polished wired glass (see EN 572-3) 1) E.g. partitions, doors, f
43、ramed glazing. 2) In accordance with the relevant clauses of the appropriate fire resistance test standards. EN 357:2004 (E) 7 drawn sheet glass (see EN 572-4) patterned glass (see EN 572-5) wired patterned glass (see EN 572-6) wired or unwired channel shaped glass (see EN 572-7) glass blocks and gl
44、ass pavers (see EN 1051-1) glass block walls (see prEN 12725) borosilicate glasses (see EN 1748-1-1) glass ceramics (see EN 1748-2-1) heat strengthened soda lime silicate glass (see EN 1863-1) laminated glass and laminated safety glass (see EN ISO 12543-1, EN ISO 12543-2, EN ISO 12543-3, EN ISO 1254
45、3-4, EN ISO 12543-5 and EN ISO 12543-6) thermally toughened soda lime silicate safety glass (see EN 12150-1) chemically strengthened soda lime silicate glass (see EN 12337-1) heat soaked thermally toughened safety glass (see prEN 14179-1) thermally toughened borosilicate safety glass (see EN 13024-1
46、) alkaline earth silicate glass (see EN 14178-1) thermally toughened alkaline earth silicate safety glass (see prEN 14321-1) in single or multiple glazing (see EN 1279-1, EN 1279-2, EN 1279-3 and EN 1279-4), as coated (see EN 1096-1, EN 1096-2 and EN 1096-3) or uncoated glass. NOTE 1 These products
47、can only be classified as being appropriate for use in fire resistant glazed elements if they have been successfully tested in accordance with the test procedures referred to in 6.2.2. NOTE 2 Annex A gives some variations of these products. 5 Classification 5.1 General The fire resistance classifica
48、tion shall be related to the complete glazed element which incorporates the glass products and all given dimensions and tolerances. The classification values are those obtained by the tested fire resistant glazed elements containing the glass product in accordance with EN 13501-2. To achieve classif
49、ication, an appropriate frame containing the glass product and designed by the sponsor, can be used for the fire test. NOTE The classification obtained with this standard structure does not mean that the glass product, used in a different frame, offers the same fire resistance as it does in the tested frame. On the basis of the performance obtain
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1