EN 3645-008-2015 en Aerospace series - Connectors electrical circular scoop-proof triple start threaded coupling operating temperature 175 or 200 continuous - Part 008 Non release .pdf

1、BSI Standards PublicationBS EN 3645-008:2015Aerospace series Connectors, electrical, circular,scoop-proof, triple startthreaded coupling operatingtemperature 175 C or 200 CcontinuousPart 008: Non release plug with groundingring Product standardBS EN 3645-008:2015 BRITISH STANDARDNational forewordThi

2、s British Standard is the UK implementation of EN3645-008:2015 . It supersedes BS EN 3645-008:2007 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this c

3、ommittee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 87967 8ICS 49.060

4、Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 28 February 2015.Amendments issued since publicationDate Text affectedBS EN 3645-008:2015EUROPEAN STANDARD NORME EU

5、ROPENNE EUROPISCHE NORM EN 3645-008 February 2015 ICS 49.060 Supersedes EN 3645-008:2007English Version Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 C or 200 C continuous - Part 008: Non release plug with grounding ring -

6、Product standard Srie arospatiale - Connecteurs lectriques circulaires contacts protgs, accouplement par filetage pas rapide trois filets, tempratures dutilisation 175 C ou 200 C continu - Partie 008 : Fiche non largable avec bague de blindage - Norme de produit Luft- und Raumfahrt - Elektrische Run

7、dsteckverbinder, kontaktgeschtzt, dreigngige Gewinde-Schnellkupplung, Betriebstemperatur 175 C oder 200 C konstant - Teil 008: Abreisicherer freier Steckverbinder mit Massering - Produktnorm This European Standard was approved by CEN on 5 December 2014. CEN members are bound to comply with the CEN/C

8、ENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centr

9、e or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the

10、official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherla

11、nds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights

12、 of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3645-008:2015 EBS EN 3645-008:2015EN 3645-008:2015 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 5 4 Required characteristics . 5 5 Designation 7 6 Mar

13、king . 8 7 Technical specification . 8 BS EN 3645-008:2015EN 3645-008:2015 (E) 3 Foreword This document (EN 3645-008:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules

14、of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or

15、 by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by August 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible fo

16、r identifying any or all such patent rights. This document supersedes EN 3645-008:2007. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

17、 Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

18、 BS EN 3645-008:2015EN 3645-008:2015 (E) 4 1 Scope This European Standard specifies the characteristics of plugs with grounding rings in the family of circular, electrical connectors, with triple start threaded coupling. It applies to models in Table 2. For contacts, sealing plugs and cable outlet a

19、ccessories associated with this plug see EN 3645-002. For receptacles and protective covers, see EN 3645-003, EN 3645-004, EN 3645-005, EN 3645-007, EN 3645-009 and EN 3645-010 respectively. These connectors are derived from and interchangeable with models W, J, K, F, M and Z in specification MIL-DT

20、L-38999/26. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includi

21、ng any amendments) applies. EN 3645-001, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 001: Technical specification EN 3645-002, Aerospace series Connectors electrical, circular, scoop-proof, triple

22、 start threaded coupling, operating temperature 175 C or 200 C continuous Part 002: Specification of performance and contact arrangements EN 3645-003, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 0

23、03: Wall-mount receptacle Product standard EN 3645-004, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 004: Receptacle, hermetic, square flange mounting Product standard EN 3645-005, Aerospace series

24、 Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 005: Receptacle, hermetic, rounf flange, brasage mounting Product standard EN 3645-007, Aerospace series Connectors electrical, circular, scoop-proof, triple start thre

25、aded coupling, operating temperature 175 C or 200 C continuous Part 007: Protective cover for plug Product standard EN 3645-009, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 009: Receptacle, round

26、flange, jam nut mounting Product standard EN 3645-010, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 010: Receptacle, hermetic, round flange, jam nut mounting Product standard MIL-DTL-38999/26, Conn

27、ectors, electrical, plug, circular, straight, removable crimp contacts, series III, metric 1)1) Published by: DoD National (US) Mil. Department of Defense http:/www.defenselink.mil/ BS EN 3645-008:2015EN 3645-008:2015 (E) 5 3 Terms and definitions For the purposes of this document, the terms and def

28、initions given in EN 3645-001 apply. 4 Required characteristics 4.1 Dimensions, mass See Figure 1, Figure 2 and Table 1. Dimensions and tolerances are in millimetres. Key 1 Blue strip 2 H number of flats Figure 1 Plug BS EN 3645-008:2015EN 3645-008:2015 (E) 6 Key 1 Blue strip 2 J number of slots Fig

29、ure 2 Plug Optional form for Models J and M Table 1 Plug Dimensions Shell size B1B2H J K S Mass without contacts + 0,20 0 max. max. max. g max. Models W, F, Z Model K Models J, M 09 18,40 20,60 4 12 19,00 21,80 15 32 9 11 21,10 23,60 14 21,90 25,00 20 41 15 13 25,40 28,20 16 26,10 29,40 27 57 21 15

30、28,70 31,30 18 29,30 32,50 34 69 25 17 32,20 34,50 20 32,80 35,70 37 72 29 19 34,90 37,30 822 35,50 38,50 48 94 38 21 38,10 40,50 24 38,70 41,70 55 105 42 23 41,10 43,70 26 41,70 44,90 67 117 51 25 44,30 46,80 28 44,90 48,00 71 140 57 4.2 Materials and surface treatment See Table 2. 4.3 Electrical,

31、mechanical and climatic characteristics See EN 3645-002. BS EN 3645-008:2015EN 3645-008:2015 (E) 7 5 Designation EXAMPLE Description block ELECTRICAL CONNECTOR Identity block EN3645-F6GN16AA Number of the basic standard Model (see Table 2) Shell code for plug (see EN 3645-002) Shell size code (see T

32、able 3) Letter indicating if: N: no grounded cavities G: grounded cavities K: no grounded cavities - specific fluid immersion (Fuel resistance, see EN 3645-001) H: grounded cavities - specific fluid immersion (Fuel resistance, see EN 3645-001) Q: quadrax cavities, grounded L: quadrax cavities, no gr

33、ounded R: reinforced insert for power contact size 8 Contact arrangement (see EN 3645-002) Contact code (see Table 4) Polarization: N, A, B, C, D, E NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. Table 2 Model coding Models Description W Seale

34、d plugs, with shell in cadmium-plated aluminium alloy, olive green Salt spray resistance 500 h Plug with shielding ring Crimped contacts Maximum operating temperature 175 C continuous J Sealed receptacles and plugs, with shell in cadmium-plated plastic composite, olive green Salt spray resistance 2

35、000 h Plug with shielding ring Crimped contacts 1 500 operations Maximum operating temperature 175 C continuous K Sealed receptacles, with shell in passivated stainless steel Salt spray resistance 500 h Plug with shielding ring Fire resistant Crimped contacts Maximum operating temperature 200 C cont

36、inuous F Sealed plugs, with shell in nickel-plated aluminium alloy Crimped contacts Plug with shielding ring Maximum operating temperature 200 C continuous M Sealed plugs, with shell in nickel-plated plastic composite Salt spray resistance 2 000 h Plug with shielding ring Crimped contacts 1 500 oper

37、ations Maximum operating temperature 200 C continuous Z Sealed plugs, zinc-nickel plated aluminium alloy, non-reflective black Salt spray resistance 500 h Plug with grounding spring Crimped contacts Maximum operating temperature 175 C continuous BS EN 3645-008:2015EN 3645-008:2015 (E) 8 Table 3 Shel

38、l size code Shell size Code 09 A 11 B 13 C 15 D 17 E 19 F 21 G 23 H 25 J Table 4 Contact code Contacts Product marking Order coding Supplied without contacts Supplied with contacts EN3155-xxxx2222 EN3155-xxxx2020 EN3155-xxxx1616 EN3155-xxxx1212 EN3155-xxxx1010 Male M A M Female F B F 6 Marking Accor

39、ding to EN 3645-001. 7 Technical specification According to EN 3645-001. This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards an

40、d other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and ex

41、pertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on st

42、andardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including Br

43、itish and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range o

44、f subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available

45、24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive

46、to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards

47、 publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or

48、revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British St

49、andards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted