EN 3645-009-2006 en Aerospace series - Connectors electrical circular scoop-proof triple start threaded coupling operating temperature 175 or 200 continuous - Part 009 Receptacle r.pdf

1、BRITISH STANDARDBS EN 3645-009:2006Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 009: Receptacle, round flange, jam nut mounting Product standard The European Standard EN 3645-009:2006 has the stat

2、us of a British StandardICS 49.060g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 3645-009:2006This British Standard was published under the a

3、uthority of the Standards Policy and Strategy Committee on 31 January 2007 BSI 2007ISBN 978-0-580-49951-7National forewordThis British Standard was published by BSI. It is the UK implementation of EN 3645-009:2006.The UK participation in its preparation was entrusted by Technical Committee ACE/6, Ae

4、rospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/3, Aerospace Connectors.A list of organizations represented on ACE/6/-/3 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are respo

5、nsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3645-009 December 2006 ICS 49.060 English Version Aerospace series - Conne

6、ctors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 009: Receptacle, round flange, jam nut mounting - Product standard Srie arospatiale - Connecteurs lectriques circulaires contacts protgs, accouplement par filetage pas rap

7、ide trois filets, tempratures dutilisation 175 C ou 200 C continu - Partie 009 : Embase collerette ronde fixation par crou - Norme de produit Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschtzt, Drei-gangige Gewinde-Schnellkupplung, Dauerbetriebstemperaturen 175 C oder 200 C - Teil

8、 009: Fester Steckverbinder mit rundem Schwei und Mutternbefestigung - Produktnorm This European Standard was approved by CEN on 28 September 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of

9、 a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A versio

10、n in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia

11、, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPIS

12、CHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3645-009:2006: E2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definition

13、s .4 4 Required characteristics.5 5 Designation 8 6 Marking .9 7 Technical specification .9 EN 3645-009:20063 Foreword This document (EN 3645-009:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out

14、in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by public

15、ation of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest by June 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall n

16、ot be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland,

17、 France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 3645-009:20064 1 Scope This standard specifies the characteristics of jam nut mo

18、unting receptacles in the family of circular, electrical connectors, with triple start threaded coupling. It applies to models in Table 3. For plugs and protective covers, see EN 3645-006, EN 3645-008, EN 3645-011 and EN 3645-012 respectively. For filler plugs and rear accessories associated with th

19、is receptacle, see EN 3645-002. These connectors are derived from and interchangeable with models W, F, J, M and K in specification MIL-DTL-38999/24. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the editi

20、on cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3645-001, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 001: Technical

21、 specification. EN 3645-002, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 002: Specification of performance and contact arrangements. EN 3645-006, Aerospace series Connectors, electrical, circular

22、, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 006: Protective cover for receptacle Product standard. EN 3645-008, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C

23、 continuous Part 008: Non release plug with grounding ring Product standard. EN 3645-011, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 011: Lanyard release plug with grounding fingers Type 1 Produ

24、ct standard. EN 3645-012, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 012: Lanyard release plug with grounding fingers Type 2 Product standard. MIL-DTL-38999/33, Connector, electrical, circular,

25、cover, protective, receptacle, series III, metric. 1)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3645-001 apply. 1) Published by: Department of Defense (DOD), The Pentagon, Washington D.C. 20301 USA. EN 3645-009:20065 4 Required characteristics 4.

26、1 Dimensions and mass See Figure 1 and Table 1. Dimensions and tolerances are in millimetres. Key 1 Red strip 2 3 holes 1,5 min. for brake wire (see option according to Detail D) 3 Models J and M: 4,5400,29+, other models: 3,1700,45+4 Blue strip 5 H on flats 6 B on flat 7 Seal NOTE One disengagement

27、 is permissible to accept the accessory mounting. Figure 1 Jam nut receptacle (without seal) (Seal Slot with close edges) Seal EN 3645-009:20066 Table 1 Jam-nut receptacle Dimensions A B C aD E F bG H Shell size 0,3 + 0,10 0,15 + 0,10 0,20 + 0,13 0,03 0,13 max. Thread 09 30,2 16,53 17,40 15,9 M171 6

28、g 0,1 R 24,00 21,82 11 34,9 19,07 20,60 18,8 M201 6g 0,1 R 27,00 24,99 13 38,1 23,82 25,40 23,8 M251 6g 0,1 R 32,00 29,77 15 41,3 26,97 28,50 26,8 M281 6g 0,1 R 36,00 32,91 17 44,5 30,15 31,85 2,39 1,14 30,8 M321 6g 0,1 R c37,00 36,12 19 49,2 33,32 34,90 33,8 M351 6g 0,1 R 41,00 39,25 21 52,4 36,50

29、37,9036,8 M381 6g 0,1 R 46,00 42,47 23 55,6 39,67 41,20 39,8, M411 6g 0,1 R 50,00 45,61 25 58,7 42,85 44,40 3,58 1,91 42,8 M441 6g 0,1 R 55,00 53,54 P S W Y Z Mass g max. + 0,4 0,1 0,4 + 0,7 0,1 AluminiumStainless steel Composite27,0 20,50 20,19 15 35 12 31,8 25,27 24,97 21 45 16 34,9 28,45 28,14 27

30、 60 21 38,1 31,62 31,32 32 70 27 41,3 2,2 34,80 34,49 1,85 1,70 40 90 31 46,0 37,92 37,62 49 104 43 49,2 41,20 40,69 54 117 50 52,4 44,37 43,86 65 132 55 14,3 55,6 3,0 47,55 47,04 2,69 2,54 73 158 65 aDimensions C and 1,5 mm shall be compatible with the panel hole bDiameter F corresponds to the star

31、t of the thread cUpper diameter modified as follow: 31,95 max. 31,80 min. EN 3645-009:20067 4.2 Materials and surface treatment See Table 3. 4.3 Recommended panel cut-out See Figure 2 and Table 2. Dimensions and tolerances are in millimetres. Figure 2 Panel cut-out Panel thickness: 3,20 max. 1,60 mi

32、n. Table 2 Panel cut-out Dimensions A B C Shell size + 0,25 0 0 0,25 min. 09 17,70 16,99 31,80 11 20,88 19,53 35,00 13 25,58 24,26 39,40 15 28,80 27,53 42,50 17 31,98 30,68 45,70 19 35,15 33,86 48,50 21 38,28 37,06 51,70 23 41,50 40,24 54,90 25 44,68 43,41 58,00 4.4 Electrical, mechanical and climat

33、ic characteristics See EN 3645-002. EN 3645-009:20068 5 Designation EXAMPLE Description block JAM-NUT ELECTRICAL CONNECTOR Identity block EN3645-F6GN35MA Number of the basic standard Model according to Table 3 Shell code for nut fitting receptacle Shell size code according to Table 4 Letter indicati

34、ng if the contact arrangement have grounded cavities or not N: no grounded cavity G: grounded cavities Contact arrangement according to EN 3645-002 Contact code according to Table 4 Polarization: N, A, B, C, D, E NOTE If necessary, the code I9005 shall be placed between the description block and the

35、 identity block. Table 3 Model coding Model Description W Sealed receptacles, with shell in cadmium-plated aluminium alloy, olive green Salt spray resistance 500 h Plug with shielding ring with elastic earthing system Crimped contacts Maximum operating temperature 175 C continuous J Sealed receptacl

36、es, with shell in cadmium-plated composite polymer, olive green Salt spray resistance 2 000 h Plug with shielding ring with elastic earthing system Crimped contact 1 500 operations Maximum operating temperature 175 C continuous F Sealed receptacles, with shell in nickel-plated aluminium alloy Crimpe

37、d contacts Plug with shielding ring with elastic earthing system Maximum operating temperature 200 C continuous M Sealed receptacles, with shell in nickel-plated plastic composite Salt spray resistance 2 000 h Plug with shielding ring with elastic earthing system Crimped contacts 1 500 operations Ma

38、ximum operating temperature 200 C continuous K Sealed receptacles, with shell in passivated stainless steel Salt spray resistance 500 h Plug with shielding ring with elastic earthing system Fire resistant Crimped contacts Maximum operating temperature 200 C continuous EN 3645-009:20069 Table 4 Shell

39、 size code Shell size Code 09 A 11 B 13 C 15 D 17 E 19 F 21 G23 H 25 J Table 5 Contact code Order coding Contacts Product marking Supplied without contacts Supplied with contacts EN3155-xxxx2222 EN3155-xxxx2020 EN3155-xxxx1616 EN3155-xxxx1212 EN3155-xxxx1010 Male M A M Female F B F 6 Marking Accordi

40、ng to EN 3645-001. 7 Technical specification According to EN 3645-001. EN 3645-009:2006BS EN 3645-009:2006BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Eu

41、rope and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our produc

42、ts and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI

43、 offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fa

44、x: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Infor

45、mation on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact t

46、he Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Admin

47、istration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsist

48、s in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any m

49、eans electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other p