EN 3660-011-2010 en Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 011 Cable outlet style K 90 Degrees shielded s.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 3660-011:2010Aerospace series Cableoutlet accessories for circularand rectangular electrical andoptical connectorsPart 011: Cable outlet, style K, 90,shielded, sealed, for

2、heat shrinkable boot Product standardBS EN 3660-011:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 3660-011:2010.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A lis

3、t of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 53264 1ICS 49.060Compliance with a British Stan

4、dard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2010.Amendments issued since publicationDate Text affectedBS EN 3660-011:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3660-

5、011 June 2010 ICS 49.060 English Version Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 011: Cable outlet, style K, 90, shielded, sealed, for heat shrinkable boot - Product standard Srie arospatiale - Accessoires arrire pour connecte

6、urs circulaires et rectangulaires lectriques et optiques - Partie 011: Raccord, type K, coud 90 , blind, tanche, pour manchon thermortractable - Norme de produit Luft- und Ramfahrt - Endgehuse fr Elektrische und optische rund- und rechtecksteckverbinder - Teil 011: Endgehuse, Bauform K, 90, Ausfrung

7、, Schirmanschlu, abgedichtet, fr wrmeschrumpfende Bauteile - Produktnorm This European Standard was approved by CEN on 19 May 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stan

8、dard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other

9、 language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark,

10、Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION

11、EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3660-011:2010: EBS EN 3660-011:2010EN 3660-011:2010 (E) 2 Contents Page Foreword 31 Scope 42 N

12、ormative references 43 Terms and definitions .44 Characteristics .45 Identification 156 Marking 157 Technical specification 15BS EN 3660-011:2010EN 3660-011:2010 (E) 3 Foreword This document (EN 3660-011:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standard

13、ization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be

14、 given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn at the latest by December 2010. Attention is drawn to the possibility that some of the elements of this docume

15、nt may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Au

16、stria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom

17、. BS EN 3660-011:2010EN 3660-011:2010 (E) 4 1 Scope This European Standard defines a range of cable outlets, style K, 90, shielded, sealed for heat shrinkable boots, for use under the following conditions. Associated electrical connector(s) : EN 3660-002 Temperature range Class N : 65 C to 200 C Cla

18、ss W : 65 C to 175 C Class K : 65 C to 260 C 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any am

19、endments) applies. EN 2591-100*, Aerospace series Elements of electrical and optical connection Test methods Part 100: General EN 3660-001, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 001: Technical specification EN 3660-002, Aerospac

20、e series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 002: Index of product standards EN 3660-033, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 033: Band Product standard 1)SAE AS85049, C

21、onnector accessories, electrical general specification 2)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3660-001 apply. 4 Characteristics 4.1 Dimensions and mass 4.1.1 General For interface dimensions, see 4.2. * All parts quoted in this standard. 1)

22、 In preparation at the date of publication of this standard. 2) Published by: Society of Automotive Engineers (SAE), (www.sae.org). BS EN 3660-011:2010EN 3660-011:2010 (E) 5 4.1.2 Cable outlet variant A Classes N and W. For screen attachment with banding band, see EN 3660-033. For dimensions and mas

23、s, see Figure 1 and Tables 1, 2 and 3. Key 1 Thread A 2 Knurl style, manufacturers option 3 Three equally spaced holes for max. 0,51 safety wire 4 Manufacturers mark and part number NOTE On both variants, coupling nut to be captive on cable outlet body but free to rotate. Figure 1 BS EN 3660-011:201

24、0EN 3660-011:2010 (E) 6 4.1.3 Cable outlet variant B Class K only. Screen pre-terminated by manufacturer. For dimensions and mass, see Figure 2 and Tables 1, 4 and 5. Key 1 Thread A 2 Knurl style, manufacturers option 3 Three equally spaced holes for max. 0,51 mm safety wire 4 Screen/shield 5 Screen

25、 termination device 6 Manufacturers mark and part number Figure 2 BS EN 3660-011:2010EN 3660-011:2010 (E) 7 Table 1 Dimensions common to both variants Dimensions in millimetres Shell size A B C ThreadClass 2B inches 0 1,14 0 0,56 08 0.500-24 UNF 15,677,75 10 0.625-24 UNEF 18,64 12 0.750-20 UNEF 21,7

26、914 0.875-20 UNEF 24,99 16 1.000-20 UNEF 28,2418 1.063-18 UNEF 30,94 20 1.188-18 UNEF 34,1622 1.312-18 UNEF 37,29 24 1.438-18 UNEF 40,4628 1.750-18 UNS 50,01 Table 2 Dimension, mass and maximum cable entry codes for variant A cable outlet Dimensions in millimetres Shell size Cable entry code E F Mas

27、s Classes N and W Class K max. max. max. g max. 08 B 28,45 43,94 7,5 19,5 10 D 31,75 46,99 9,5 26,012 F 35,05 47,50 11,5 31,0 14 G 36,58 49,28 16 J 39,62 51,56 18 K 44,45 55,88 16,0 43,5 20 M 44,45 55,88 21,0 58,022 P 50,80 58,67 23,5 64,5 24 R 50,80 58,67 26,50 72,528 T BS EN 3660-011:2010EN 3660-0

28、11:2010 (E) 8 Table 3 Cable entry dimensions for variant A cable outlet Dimensions in millimetres Cable entry code G 0,51 K 0,51 H max. A 4,75 7,92 11,10B 6,35 9,52 12,70 C 7,92 11,12 14,30D 9,52 12,70 15,88 E 11,12 14,30 17,50F 12,70 15,88 19,05 G 14,30 17,50 20,65H 15,88 19,05 22,23 J 17,50 20,65

29、23,80K 19,05 22,23 25,40 L 20,65 23,83 27,00M 22,23 25,40 30,16 N 23,83 27,00 31,75P 25,40 28,58 33,34 R 28,85 31,75 36,51S 31,75 34,93 42,84 T 34,93 38,10 46,02Table 4 Dimensions, mass and maximum entry codes for variant B cable outlet Dimensions in millimetres Shell size Cable entry code E D Mass

30、a Classes N and W max. max. max. g max. 08 B 28,45 43,94 6,510 D 31,75 46,99 8,5 12 F 35,05 47,50 10,514 G 36,58 49,28 12,0 16 J 39,62 51,56 13,518 K 44,45 55,88 15,5 20 M 44,45 55,88 19,522 P 50,80 58,67 22,0 24 R 50,80 58,67 26,528 T 45,5 aThe mass quoted includes the device used for securing the

31、screen to the cable outlet plus the specified length of screen and is for the maximum entry size. BS EN 3660-011:2010EN 3660-011:2010 (E) 9 Table 5 Cable entry dimensions for variant B cable outlet Dimensions in millimetres Cable entry code F 0,51 G max. A 4,75 9,58B 6,35 14,22 C 7,92 16,00D 9,52 17

32、,53 E 11,12 19,05F 12,70 20,83 G 14,30 22,61H 15,88 24,13 J 17,50 25,91K 19,05 28,45 L 20,65 30,48M 22,23 32,26 N 23,83 32,00P 25,40 34,80 R 28,58 37,34S 31,75 40,64 T 34,93 43,434.2 Interface dimensions 4.2.1 Associated connection See EN 3660-002. BS EN 3660-011:2010EN 3660-011:2010 (E) 10 4.2.2 St

33、andard AS 85049 interface See Figure 2 and Table 6. Key 1 4,95 mm min penetration of Z diameter measured from front of teeth 2 N number of teeth, see Table 6. Figure 3 Table 6 For standard AS85049 interface Dimensions in millimetres Shell size W X Y Z N + 0,64 0 0 0,38 + 0,38 0 0 0,25 Number of teet

34、h 08 12,74 9,14 7,59 6,86 12 10 15,88 12,55 11,00 9,53 1512 19,05 15,49 13,94 12,98 21 14 22,23 18,67 17,12 14,86 2416 25,40 21,84 20,29 18,03 30 18 26,97 23,27 22,07 20,04 3320 30,18 26,44 25,25 23,22 36 22 33,32 29,62 28,42 26,39 3924 36,53 32,79 31,60 29,31 42 28 44,45 38,40 37,31 35,28 54BS EN 3

35、660-011:2010EN 3660-011:2010 (E) 11 4.2.3 Modified AS85049 interface For class K only See Figure 4 and Table 7. Figure 4 Table 7 For modified AS85049 interface Dimensions in millimetres Shell size F G H J N Ref. + 0,13 0 + 0,18 0 0 0,25 Number of teeth 08 11,10 9,17 6,68 6,86 12 10 14,53 11,10 9,35

36、9,53 1512 17,45 14,83 12,62 12,80 21 14 20,62 17,22 15,98 14,86 2416 23,80 20,55 17,73 17,93 30 18 25,20 22,48 21,46 20,04 3320 28,37 25,53 25,02 23,22 36 22 31,55 29,01 27,61 26,39 3924 34,72 32,46 31,62 29,31 42 28 42,75 38,91 37,97 35,28 544.3 Material and finish Material/finish Class N : Alumini

37、um/electroless nickel plated Material/finish Class W : Aluminium/olive drab cadmium plated Material/finish Class K : Stainless steel/passivated BS EN 3660-011:2010EN 3660-011:2010 (E) 12 4.4 Assembly torque These torque values are intended for installation use only. Table 8 Shell size Torque Nm 0,5

38、08 4,5 10 12 14 16 18 20 9,0 22 24 28 10,0 4.5 Coupling thread strength torques These torque values are for test purposes, see EN 2591-420 and Table 9. Table 9 Shell size Torque Nm 0,5 08 5,5 10 12 14 16 18 20 11,0 22 24 28 12,0 BS EN 3660-011:2010EN 3660-011:2010 (E) 13 4.6 Tests Test details to be

39、 in accordance with Table10, EN 3660-001 and EN 2591-100. Qualification to be in accordance with EN 3660-001. Table 10 EN 2591- Designation of the test Not applicable Applicable see EN 3660-001Details 101 Visual examination X 102 Examination of dimensions and mass X See 4.1 and 4.2. 205 Housing (she

40、ll) electrical continuity X Class N: 2,5 m; Class W: 5 m; Class K: 10 m. 212 Surface transfer impedance (from 100 MHz to 1 GHz) a X Method 2. Frequency Minimum attenuation Classes F, W and K MHz dB 100 90/80 200 88/75 300 88/73 400 87/71 800 85/66 1 000 85/65 301 Endurance at temperature X Classes N

41、 and W only Class K, see b. 305 Rapid change of temperature X ClassesTATBT1+ 5 0 0 5 C C min. N 200 65 30 W 175 65 30 K 260 65 30 continued BS EN 3660-011:2010EN 3660-011:2010 (E) 14 Table 10 (concluded) EN 2591- Designation of the test Not applicable Applicable see EN 3660-001Details 306 Mould grow

42、th X See EN 3660-001, 10.2.3. 307 Salt mist X Duration: Class N 48 h Class W 500 h Class K 500 h 308 Sand and dust X 314 Immersion at low air pressure X 315 Fluid resistance X 316 Ozone resistance X 317 Flammability X 318 Fire-resistance X 402 Shock X Method A. Severity: 300 No. of shocks: One in ea

43、ch direction in 3 perpendicular axis Visual examination only No visual damage 403 Vibration X Method B. Figure 3 and Table 2 Level J Duration: 8 hours at ambient temperature Visual examination only. No visual damage. 406 Mechanical endurance 30 cycles 408 Mating and unmating X 420 Mechanical strengt

44、h of rear accessories X Phase A only. Torque as specified in Table 9. 422 Locking wire hole strength X 513 Magnetic permeability X Not fitted to a connector max. values Classes N and W : 2,0 Class K : 2,5 a1 GHz to 10 GHz under consideration. bClass K to be subjected to test EN 2591-301 only where n

45、on-metallic components are used. BS EN 3660-011:2010EN 3660-011:2010 (E) 15 Table 11 Identification code for material, finish and screen type for variant B only Code Class a Screen code b A N T B N N C W T D W N aSee 4.3. bSee Table 12. Table 12 Identification code of screen type for variant B only

46、Code Screen and plating T Tin plated copper N Nickel plated copper 5 Identification EXAMPLE 1 Description block CABLE OUTLET Identity block EN3660-011XXXXX Number of this standard Material/finish For variant B, see Table11 For variant A, see 4.3 Shell size Entry size (see Tables 3 and 5) Screen type

47、 for variant B only (see Table 12) EXAMPLE 2 EN3660-011B12N Cable outlet, spin coupling, style K, 90, electroless nickel finish, shell size 12, standard AS85049 interface, with nickel plated screen attached. 6 Marking See Figures 1 and 2 and EN 3660-001. 7 Technical specification See EN 3660-001. Th

48、is page deliberately left blankThis page deliberately left blankBSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is inc

49、orporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the c