EN 3660-019-2009 en Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 019 Cable outlet style A 45 degree unsealed wi.pdf

1、BS EN3660-019:2009ICS 49.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Cable outletaccessories for circularand rectangularelectrical and opticalconnectorsPart 019: Cable outlet, style A, 45,unsealed, with cable tie strain relief Product sta

2、ndardThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 March2009 BSI 2009ISBN 978 0 580 63191 7Amendments/corrigenda issued since publicationDate CommentsBS EN 3660-019:2009National forewordThis British Standard is the UK implementation of EN 36

3、60-019:2009.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the

4、necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 3660-019:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3660-019 February 2009 ICS 49.060 English Version Aerospace ser

5、ies - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 019: Cable outlet, style A, 45, unsealed, with cable tie strain relief - Product standard Srie arospatiale - Accessoires arrire pour connecteurs circulaires et rectangulaires lectriques et optiques -

6、 Partie 019 : Raccord coud, 45, non tanche, type A, avec tenue du cble par frettage - Norme de produit Luft- und Raumfahrt - Endgehuse fr elektrische und optische Rund- und Rechtecksteckverbinder - Teil 019: Endgehuse, Bauform A, 45, nicht abgedichtet, mit Arm fr Kabelbinder - Produktnorm This Europ

7、ean Standard was approved by CEN on 6 September 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references c

8、oncerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into it

9、s own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Li

10、thuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 200

11、9 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3660-019:2009: EBS EN 3660-019:2009EN 3660-019:2009 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .44 Characteristics .45 Designation 96 Mar

12、king .97 Technical specification .9BS EN 3660-019:2009EN 3660-019:2009 (E) 3 Foreword This document (EN 3660-019:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of t

13、his Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by

14、endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at the latest by August 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for id

15、entifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, G

16、reece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 3660-019:2009EN 3660-019:2009 (E) 4 1 Scope This product standard defines a range of cable outle

17、ts, style A, 45, straight, unsealed, with clamp strain relief. Associated electrical connector(s): see EN 3660-002. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated refe

18、rences, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products EN 2591-100*, Aerospace series Elements of electrical and optical connection Test methods General EN 3660-001, Aerospace series Cable outlet accessories f

19、or circular and rectangular electrical and optical connectors Part 001: Technical specification EN 3660-002, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 002: Index of product standards 3 Terms and definitions For the purposes of this

20、document, the terms and definitions given in EN 3660-001 apply. 4 Characteristics 4.1 Dimensions and masses For dimensions and masses, see Figure 1 and Table 1. Dimensions and tolerances are in millimetres. *All parts quoted in Table 4. BS EN 3660-019:2009EN 3660-019:2009 (E) 5 Key 1 Cable tie or la

21、ce cord Figure 1 Detail A: see Figures 2a) to 2e). Figure 2a) Without ground lug and spacer pad Figure 2b) Without ground lug and with spacer pad Figure 2c) With ground lug and without spacer pad Figure 2d) With ground lug and spacer pad Figure 2e) Spacer pad alone AD B F G5,8 RefE HC A 13,3 3,66,86

22、,6BS EN 3660-019:2009EN 3660-019:2009 (E) 6 Table 1 Shell size A B CaD E F G H Number of teeth Without With Thread Without With Radius self-locking self-locking Masses max. ClassesA, N and W max. 0,38 max. max. min. max. g g 09 M12x1-6H 19,60 24,80 6,29 27,1 12,50 7,59 18,00 2,11 12 5,5 6,5 11 M15x1

23、-6H 20,80 26,90 6,29 27,1 12,50 10,85 19,00 2,87 16 6,0 7,5 13 M18x1-6H 23,90 29,70 6,29 27,1 12,50 13,74 21,50 3,81 20 7,5 9,0 15 M21x1-6H 27,20 32,70 6,29 30,2 12,50 16,92 26,00 4,77 24 11,0 13,0 17 M25x1-6H 30,70 36,10 6,29 31,1 12,50 20,09 27,00 5,66 28 12,5 14,5 19 M28x1-6H 34,50 39,10 6,29 31,

24、1 12,50 22,18 28,50 7,13 32 13,5 16,0 21 M31x1-6H 37,60 42,40 6,29 31,1 12,50 25,96 32,00 7,13 36 15,0 18,5 23 M34x1-6H 40,60 51,10 6,29 31,1 12,50 29,13 34,50 7,82 40 17,5 20,5 25 M37x1-6H 43,20 53,80 6,29 31,1 12,50 32,31 36,50 8,89 44 20,5 25,0 a“C” dimensions are taken when the coupling nut is p

25、ulled in forward position. 4.2 Interface dimensions See Figure 3 and Table 2. Figure 3 D A B CR 0,25 0,13 R 0,50 0,13 (100 2)0 0,2 0,79BS EN 3660-019:2009EN 3660-019:2009 (E) 7 Table 2 Shell size A B C D N Number of teeth 0 0,15 max. min. min. mm mm mm mm 09 10,57 7,50 6,70 2,90 12 11 13,56 10,80 9,

26、90 2,90 16 13 16,58 13,80 12,80 2,90 20 15 20,57 16,90 16,00 2,90 24 17 23,57 20,10 19,20 2,90 28 19 25,57 22,80 21,40 2,90 32 21 29,97 26,00 24,60 2,90 36 23 32,56 29,10 27,70 2,90 40 25 35,56 32,30 30,90 1,70 44 4.3 Material and finish Backshell: Class A : Aluminium/black anodised Class N : Alumin

27、ium/electroless nickel plated Class W : Aluminium/olive drab cadmium plated Spacer pad: silicone 4.4 Assembly torque These torque values are intended for installation use only. See Table 3. Table 3 Shell size Torque Nm 0,5 09 7,8011 10,60 13 15,2015 16,3017 16,30 19 16,3021 19,1023 19,10 25 19,10BS

28、EN 3660-019:2009EN 3660-019:2009 (E) 8 4.5 Tests Test details to be in accordance with Table 4, EN 3660-001 and EN 2591-100. Table 4 EN 2591- Designation of the test Not applicable Applicable see EN 3660-001 Details 101 Visual examination X 102 Examination of dimensions and mass X See 4.1. 205 Housi

29、ng (shell) electrical continuity X 212 Surface transfer impedance (from 100 MHz to 1 GHz) aX 301 Endurance at temperature X According to class. 305 Rapid change of temperature X 306 Mould growth X See EN 3660-001. 307 Salt mist X Cable outlet not fitted to a connector and suspended with non metallic

30、 cord. Duration: Classes A and N 48 h; Classes W and K 500 h. 308 Sand and dust X 314 Immersion at low air pressure X 315 Fluid resistance X 316 Ozone resistance X 317 Flammability X With spacer pad. 318 Fire-resistance X 402 Shock X Method A. Severity: 100 g. 403 Sinusoidal and random vibration X M

31、ethod B. Figure 3. Level J. Duration: 8 h in each of two axes. Test performed: on one group: 50 % of time at 65 C, 50 % of time at ambient temperature; on a second group: 100 % of time at maximum temperature of class under test. 406 Mechanical endurance X 408 Mating and unmating forces X 420 Mechani

32、cal strength of rear accessories X Phase D and Table 5. 422 Locking wire hole strength X 513 Residual magnetism X Not fitted to a connector. Max. values: Classes A, N and W 2,0; Class K 5,0. a1 GHz to 10 GHz under consideration. BS EN 3660-019:2009EN 3660-019:2009 (E) 9 5 Designation EXAMPLE 1 Descr

33、iption block CABLE OUTLET Identity block EN3660-019XXXXX Number of this standard Material/Finish class (see 4.3) Coupling nut 1 without self-locking device 2 with self-locking device Strain relief type A without spacer pad and ground lug B with spacer pad and ground lug C with spacer pad and without

34、 ground lug D without spacer pad and with ground lug Shell size EXAMPLE 2 EN3660-019A1A09 Style A, cable outlet, aluminium/black anodised, without self-locking, without spacer pad and ground lug, shell size 09. NOTE 1 No gaps are required between sections in the part number when printed. NOTE 2 If n

35、ecessary, the code I9005 may be placed between the description block and the identity block. 6 Marking According to EN 2424, category P. 7 Technical specification Refer to EN 3660-001. BS EN3660-019:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)2

36、0 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. U

37、sers of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary

38、 of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.B

39、uying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for int

40、ernational standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Techn

41、ical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developm

42、entsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be foun

43、d at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 19

44、88 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: