EN 3660-035-2017 en Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 035 Cable outlet style K 90 for heat shrinkabl.pdf

1、Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectorsPart 035: Cable outlet, style K, 90, for heat shrinkable boot, shielded, sealed Product standardBS EN 3660035:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06E

2、UROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3660-035 September 2017 ICS 49.060 English Version Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 035: Cable outlet, style K, 90, for heat shrinkable boot, shielded, sealed - Produc

3、t standard Srie Arospatiale - Accessoires arrire pour connecteurs circulaires et rectangulaires lectriques et optiques - Partie 035 : Raccord, type K, coud 90, blind, tanche, pour manchon thermortractable - Norme de produit Luft- und Raumfahrt - Endgehuse fr elektrische und optische Rund- und Rechte

4、cksteckverbinder - Teil 035: Endgehuse, Bauform K, 90, fr wrmeschrumpfende Bauteile, Schirmanschlu, abgedichtet, selbstsichernd -Produktnorm This European Standard was approved by CEN on 17 April 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the cond

5、itions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exist

6、s in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national stan

7、dards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slov

8、akia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any mean

9、s reserved worldwide for CEN national Members. Ref. No. EN 3660-035:2017 ENational forewordThis British Standard is the UK implementation of EN 3660035:2017.The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology.A l

10、ist of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards

11、 Limited 2017ISBN 978 0 580 96940 9ICS 49.060Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate

12、 Text affectedBRITISH STANDARDBS EN 3660035:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3660-035 September 2017 ICS 49.060 English Version Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 035: Cable outlet, style K, 90, fo

13、r heat shrinkable boot, shielded, sealed - Product standard Srie Arospatiale - Accessoires arrire pour connecteurs circulaires et rectangulaires lectriques et optiques - Partie 035 : Raccord, type K, coud 90, blind, tanche, pour manchon thermortractable - Norme de produit Luft- und Raumfahrt - Endge

14、huse fr elektrische und optische Rund- und Rechtecksteckverbinder - Teil 035: Endgehuse, Bauform K, 90, fr wrmeschrumpfende Bauteile, Schirmanschlu, abgedichtet, selbstsichernd -Produktnorm This European Standard was approved by CEN on 17 April 2017. CEN members are bound to comply with the CEN/CENE

15、LEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre o

16、r to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the off

17、icial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands

18、, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All r

19、ights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3660-035:2017 EBS EN 3660035:2017EN 3660-035:2017 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 5 4 Characteristics . 5 5 Designation18

20、 6 Marking .18 7 Technical specification 18 BS EN 3660035:2017EN 3660-035:2017 (E) 3 European foreword This document (EN 3660-035:2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance wi

21、th the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an iden

22、tical text or by endorsement, at the latest by March 2018, and conflicting national standards shall be withdrawn at the latest by March 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for id

23、entifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yu

24、goslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 3660035:2017EN 3660-035:2017 (E)

25、 4 1 Scope This European Standard defines a range of cable outlets, style K, 90, shielded, sealed for heat shrinkable boot, for use with memory metal rings under the following conditions. The mating connectors are listed in EN 3660-002. Temperature range, Class N : 65 C to 200 C Class K : 65 C to 20

26、0 C Class W : 65 C to 175 C Class T : 65 C to 175 C (Nickel PTFE plating) Class Z : 65 C to 175 C (Zinc nickel plating) Associated electrical accessories : EN 3660-034 memory metal rings (for shield termination backshells). These cable outlets are designed for termination of overall shielding braid

27、or individual cable shields. They accommodate/permit the termination of heat shrinkable boots. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited appl

28、ies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-100*, Aerospace series Elements of electrical and optical connection Test methods Part 100: General EN 3645 (all parts), Connectors, electrical, circular, scoop-proof, triple start

29、threaded coupling operating temperature 175 C or 200 C continuous EN 3660-001, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 001: Technical specification EN 3660-002, Aerospace series Cable outlet accessories for circular and rectangula

30、r electrical and optical connectors Part 002: Index of product standards EN 3660-034, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 034: Memory metal rings for the attachment of screens Product standardEN 3909, Aerospace series Test flu

31、ids and test methods for electrical and optical components and sub-assemblies *All its parts quoted in this European Standard. BS EN 3660035:2017EN 3660-035:2017 (E) 5 IEC 60529, Degrees of protection provided by enclosures (IP Code) AS85049, Connector accessories, electrical general specification f

32、or- 1)A-A-59569, Braid, wire (copper, tin-coated, silver-coated, or nickel coated, tubular or flat) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3660-001 apply. 4 Characteristics 4.1 Dimensions and mass For dimensions and mass, see Figures 1, 2 and

33、 3 and Tables 1, 2, 3 and 4. For cable entry dimensions, see 4.2. Dimensions are in millimetres. 1) Published by: SAE National (US) Society of Automotive Engineers. http:/www.sae.org/ BS EN 3660035:2017EN 3660-035:2017 (E) 6 Key 1 O-ring 2 Thread C 3 Marking 4 Three equally spaced holes 1 mm diamete

34、r for locking wire 5 Straight knurl, pitch manufacturers option 6 EN 3660-034 memory metal ring NOTE Valley of start tooth to be at vertical centre line of accessory at position shown: Within 3 for shell sizes 09-13; Within 2 for shell sizes 15-19; Within 1 for shell sizes 21 and larger. Bend radius

35、 to be determined by method of manufacture. Cable outlets may be manufactured as cast, fabricated or machined (manufacturers option). No sharp edges/burrs permissible on internal surfaces/joints. Surface finish of on all internal surfaces. Figure 1 Cable outlet 1,6 nullm max. BS EN 3660035:2017EN 36

36、60-035:2017 (E) 7 Table 1 Fixed dimensions of shell Dimensions in millimetres Shell size Entry size Cable dia. (ref) C Thread B D E W max. max. max. min. max. max. 09 04 5,4 M12 1,0-6H 19,1 27,9 14,5 31,2 11 07 9,4 M15 1,0-6H 21,6 30,5 14,5 36,1 13 08 10,8 M18 1,0-6H 25,4 32,0 14,5 37,6 15 10 13,5 M

37、22 1,0-6H 29,2 34,0 14,5 40,6 17 12 16,2 M25 1,0-6H 31,8 35,6 14,5 43,9 19 14 18,9 M28 1,0-6H 35,6 36,8 14,5 47,0 21 16 21,6 M31 1,0-6H 38,1 38,4 14,5 50,8 23 18 24,3 M34 1,0-6H 41,9 39,9 14,5 54,1 25 20 27,0 M37 1,0-6H 44,5 42,4 14,5 57,2 Table 2 Mass for classes K, N, W, T and Z Mass in grams Shel

38、l size code End-fitting size code Classes 04 05 06 07 08 10 12 14 16 18 20 09 13,25 N,T,W,Z 36,60 K 11 16,40 17,40 18,75 N,T,W,Z 45,45 48,20 52,00 K 13 20,20 22,65 25,95 N,W,Z, 56,00 62,75 71,90 K 15 24,65 27,15 30,55 34,50 N,T,W,Z 68,30 75,25 84,70 95,60 K 17 30,20 33,70 37,50 40,80 N,T,W,Z 83,70 9

39、3,40 103,90 113,10 K 19 35,65 38,40 42,20 50,50 N,T,W,Z 98,80 106,40 116,90 139,90 K 21 40,50 47,50 57,50 N,T,W,Z 112,20 131,60 159,30 K 23 49,10 57,00 67,10 N,T,W,Z 136,05 157,90 185,90 K 25 57,30 66,60 78,10 N,T,W,Z 158,75 184,50 216,40 K BS EN 3660035:2017EN 3660-035:2017 (E) 8 4.2 Cable entry di

40、mensions See Figure 2 and Table 3. Section A-A Key 1 See detail section A-A for surface dimensions Figure 2 Cable entry BS EN 3660035:2017EN 3660-035:2017 (E) 9 Table 3 Dimensions in millimetres Cable outlet code A B C D + 0,25 0,5 min. max. 0,5 + 0,2 0 04 6,4 9,39 9,56 14,0 1,12 05 7,9 10,97 11,13

41、15,5 1,12 06 9,5 12,57 12,73 17,1 1,12 07 11,1 14,12 14,31 18,7 1,12 08 12,7 15,72 15,91 20,3 1,12 10 15,9 18,84 19,11 23,5 1,12 12 19,1 22,02 22,28 26,7 1,75 14 22,2 25,17 25,46 29,8 1,75 16 25,4 28,34 28,63 33,0 1,75 18 28,6 31,52 31,81 36,2 1,75 20 31,8 34,69 34,98 39,4 1,75 NOTE The cable outlet

42、 shall be selected in accordance with the maximum diameter of the cable bundle, see Table 1. 4.3 Associated connectors See EN 3660-002. 4.4 Standard AS85049 interface See Figure 3 and Table 4. All dimensions are in millimetres. BS EN 3660035:2017EN 3660-035:2017 (E) 10 Detail A Key 1 See detail A Fi

43、gure 3 Interface Table 4 Dimensions in millimetres Shell size A B N Number of teeth 0 0,15 min. 09 10,57 7,50 12 11 13,56 10,80 16 13 16,58 13,80 20 15 20,57 16,90 24 17 23,57 20,10 28 19 26,57 22,80 32 21 29,57 26,00 36 23 32,56 29,10 40 25 35,56 32,30 44 BS EN 3660035:2017EN 3660-035:2017 (E) 11 4

44、.5 Material and finish Material/Finish Class N : Aluminium/Nickel plated Material/Finish Class K : Stainless steel/Passivated Material/Finish Class W : Aluminium/Olive drab cadmium plated Material Finish Class T : Aluminium (Nickel PTFE plated) Material/ Finish Class Z : Aluminium (Zinc nickel plate

45、d) 4.6 Assembly torque These torque values are intended for installation use only, see Table 5. Table 5 Shell size Assembly torque max. Nm Class K Classes N, T, W and Z 09 6,3 6,3 11 8,6 8,6 13 12,2 12,2 15 13,1 13,1 17 13,1 13,1 19 13,1 13,1 21 15,4 15,4 23 15,4 15,4 25 15,4 15,4 4.7 Tests Tests ac

46、cording to EN 2591-100 Test details to be in accordance with Table 6, EN 3660-001 and EN 2591-100. Qualification to be in accordance with EN 3660-001. BS EN 3660035:2017EN 3660-035:2017 (E) 12 Table 6 Tests (1 of 5) EN 2591- Designation on the test Not applicable Applicable see EN 3660-001 Details 1

47、01 Visual examination X 102 Examination of dimensions and mass X See 4.1 and 4.2. 205 Housing (shell) electrical continuity X Cable outlet Connector connection. Measured from connector, through backshell to braid. Class N : 5 m Class W : 10 m Class K : 20 m Class T : 10 m Class Z : 10 m 212 Surface

48、transfer impedance (from 100 MHz to 1 GHz) a X Frequency Zt (m) MHz Class N Classes T, W, Z Class K 0,1 5 10 20 1 5 10 20 10 7 15 30 30 10 20 40 100 20 40 80 Test mounting as per 4.7.2. The Zt values correspond to the total surface impedance of the assembly. Test shall be achieved with a same size and class couple connectors EN 3645 (series) than the accessory. BS EN 3660035:2017EN 3660-035:2017 (E) 13 Table 6 Tests (2 of