EN 3662-006-2006 en Aerospace series - Circuit breakers three-pole temperature compensated rated current 20 A to 50 A - Part 006 With polarized signal contact - Bus-bar version - P.pdf

1、BRITISH STANDARDBS EN 3662-006:2006Aerospace series Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A Part 006: With polarized signal contact Bus-bar version Product standardThe European Standard EN 3662-006:2006 has the status of a British StandardICS 49.060g49g50g3g

2、38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 3662-006:2006This British Standard was published under the authority of the Standards Policy and Strate

3、gy Committee on 31 January 2007 BSI 2007ISBN 978 0 580 50005 3National forewordThis British Standard was published by BSI. It is the UK implementation of EN 3662-006:2006.The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic

4、technology, to Panel ACE/6/-/5, Aerospace Protection for electrical systems.A list of organizations represented on ACE/6/-/5 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct appl

5、ication.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 3662-006August 2006ICS 49.060English VersionAerospace series - Circuit breakers, three-pole, temperature

6、compensated, rated current 20 A to 50 A - Part 006: Withpolarized signal contact - Bus-bar version - Product standardSrie arospatiale - Disjoncteurs tripolaires compenss entemprature, intensits nominales 20 A 50 A - Partie 006: Avec contact de signalisation polaris - Version barre-bus- Norme de prod

7、uitLuft- und Raumfahrt - Schutzschalter, dreipolig,Temperaturkompensiert, Nennstrme von 20 A bis 50 A -Teil 006: Mit polarisiertem Signalkontakt -Sammelschienenversion - ProduktnormThis European Standard was approved by CEN on 5 June 2006.CEN members are bound to comply with the CEN/CENELEC Internal

8、 Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This

9、 European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the na

10、tional standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kin

11、gdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3662-006:2006: E2 Cont

12、ents Page Foreword3 1 Scope 4 2 Normative references 4 3 Dimensions and mass.4 4 Characteristics.6 5 Designation 11 6 Rated current code 11 7 Delivery codes12 8 Marking .12 9 Technical specification .12 EN 3662-006:20063 Foreword This European Standard (EN 3662-006:2006) has been prepared by the Aer

13、ospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, pri

14、or to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2007, and conflicting national standards shall be withdrawn at the latest by February 2007. Attention is dra

15、wn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followi

16、ng countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

17、 Sweden, Switzerland and the United Kingdom. EN 3662-006:20064 1 Scope This standard specifies the characteristics of three-pole circuit breakers, temperature compensated with a rated current from 20 A to 50 A, used in aircraft on-board circuits at a temperature between 55 C and 90 C and at an altit

18、ude of 15 000 m max. These circuit breakers are operated by a push-pull type single push button (actuator), with delayed action “trip-free“ tripping with a polarized signal contact which is open when main contacts are closed, and inversely. They are connected on supply side by means of bus-bar. They

19、 will continue to function up to the short-circuit current. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (i

20、ncluding any amendments) applies. EN 3155-016, Aerospace series Electrical contacts used in elements of connection Part 016: Contacts, electrical, male, type A, crimp, class S Product standard. EN 3662-001, Aerospace series Circuit breakers, three-pole, temperature compensated, rated current 20 A to

21、 50 A Part 001: Technical specification. EN 3841-305, Aerospace series Circuit breakers Test methods Part 305: Short-circuit performance. EN 6113, Aerospace series Circuit breaker, connecting and attachment hardware.1)TR 6083, Aerospace series Cut-outs for installation of electrical components.2)MIL

22、-I-81969/1A, Installing and removal tools, connector electrical contact, type III, class 2, composition C.3)MIL-I-81969/14C, Installing and removal tools, connector electrical contact, type III, class 2, composition B.3)MIL-S-19500, Semiconductor device, diode, silicon, fast recovery.3)FED-STD-595B,

23、 Colors used in Government Procurement. 3 Dimensions and mass 3.1 Dimensional characteristics The circuit breakers do not have to correspond to the pictorial illustration, only the dimensions given shall be adhered to. Dimensions are in millimetres. See Figure 1. 1) Published as AECMA Prestandard at

24、 the date of publication of this standard. 2) Published as AECMA Technical Report at the date of publication of this standard. 3) Published by: Department of Defense (DOD), the Pentagon, Washington D.C. 20301 USA. EN 3662-006:20065 Key 1 Push button released 10 2 Green colour according to FED-STD-59

25、5B No. 34090 Gauge 20 connection pins according to EN3155-016M2018 3 White 11 Indicative value 25 (see note) 4 Marking area, see Clause 8. 12 5 Connecting screw and washer Positioning lug in accordance with the panel cut-out, as per TR6083C202 6 Push button pressed 13 Rated current marking (white on

26、 green) 14 3 holes 5,5 010,+7 8 9 Lockwasher Attachment nut 1 to 3 max. 15 Bus-bar side F1 and F2: see EN 3662-001 “Mechanical tests“. NOTE Tools noted in subclause 4.2.4 shall be applied without interfering with the terminal 2 connection, even if the circuit breakers are grouped. Figure 1 Configura

27、tion Dimensions Tolerances 110,5 A135C2 C1A153C2 B2 A2A1 B1 C1531,50-0,223M12 x 0,753 min.2 0,3A43max.7 min.10,5 0,5815,1 min.F225 B119,5max.0,5A120,5A0,7F1 and F2 : see EN 3662-001, table 354 max.9,5 0,134 max.42 max.15,1 min.15,1 min.17,5 0,217,5 0,214r2,5 max.17,5 0,8 17,5 0,810 min.10 min. 9,2 0

28、,3926,50,3180-123148128max.6,60,640,2max.48,254+1025 max.4534021A20,5A0,5A19,50,2B271106Side view of terminals 1F1Bus-bar side 10,2 0,315 EN 3662-006:20066 3.2 Electrical diagram See Figure 2. Terminal No.: 1 and 2: Main contacts 3 and 5: Signal contacts Figure 2 Electrical diagram 3.3 Mass 185 g ma

29、x. (delivery code A including hardware). 3.4 Panel mounting See EN 3662-001. 4 Characteristics 4.1 Material, surface treatment See EN 3662-001. 4.2 Mechanical characteristics 4.2.1 Fasteners See EN 6113. 4.2.2 Recommended tightening torque of attaching nut for installation (5,25 0,25) Nm. 4.2.3 Reco

30、mmended tightening torque of connection hardware for installation (2,35 0,15) Nm. A2 A1B2 B1C2 C13 5Push-button releasedA2 A1B2 B1C2 C13 5Push-button pressed3 5or3 5orEN 3662-006:20067 4.2.4 Recommended tools for contacts of auxiliary contact insertion and extraction plastic MIL-I-81969/14-11; metal

31、lic MIL-I-81969/1-02. 4.2.5 Resistance to vibrations 4.2.5.1 Combined test: ambient temperature at 70 C and vibrations Sinusoidal: 10 gn, see EN 3662-001. Random: 5,8 gn, see EN 3662-001. Low frequencies: 10 gn, see EN 3662-001. 4.2.5.2 Combined test: ambient temperature at 85 C, altitude and vibrat

32、ions Sinusoidal: 3 gn, see EN 3662-001. 4.2.6 Resistance to shocks 50 gn, see EN 3662-001. 4.2.7 Mechanical endurance See Table 6. 4.3 Environment characteristics 4.3.1 Humidity See EN 3662-001. 4.3.2 Corrosion See EN 3662-001. 4.3.3 Contaminating liquids See EN 3662-001. 4.3.4 Overvoltage caused by

33、 lightning See EN 3662-001. 4.4 Electrical characteristics 4.4.1 Nominal voltages of main contacts See Table 1. Table 1 Nominal voltage 115/200 V a.c., 360 Hz to 800 Hz EN 3662-006:20068 4.4.2 Diode of signal contact characteristic Maximum current at 125 C: 0,5 A. Peak repetitive reversal voltage: 8

34、00 V min. Quality standard: JANTX according to MIL-S-19500. 4.4.3 Voltage drop at nSee Table 2. Table 2 Ratings A 20 25 30 35 40 45 50 U max. at n V 0,15 0,15 0,15 0,15 0,12 0,12 0,12 Signal circuit: 28 V d.c.; I = 3 mA : U 1,0 V. NOTE When a signal contact has been operated with a power greater tha

35、n 60 mW and/or with a voltage higher than 28 V d.c., it loses its low current quality. 4.4.4 Minimum and maximum tripping thresholds See Table 3. Table 3 Overload (in % of n) Minimum thresholds value 1 h Maximum thresholds value 1 h Ambient temperatures C Ratings On ground At 15 000 m On ground 23 5

36、 110 105 145 55 5 110 105 165 70 5 105 100 145 90 5 All 100 90 145 NOTE 1 For detection of minimum threshold, all the poles are connected in series. NOTE 2 For detection of maximum threshold, load value is: increased by about 20 % when one pole is submitted to the load and other poles are not loaded

37、; increased by about 10 % when two poles are submitted to the load and the other one is not loaded; not increased when the two other poles are loaded at 0,9 n. EN 3662-006:20069 4.4.5 Overload trip See Table 4. Table 4 Overload (in % of n) 200 500 1 000 3 poles 1 pole 3 poles 1 pole 3 poles 1 pole A

38、mbient temperatures C Ratings A Trip time s 23 5 2 to 20 2 to 22 55 5 60 110 90 5 All 1,5 1,5 0,15 to 4,00 0,15 to 5,20 0,05 to 1,00 0,06 to 1,30 NOTE 1 When 3 poles are loaded, they will be connected in series. NOTE 2 When 1 pole is loaded, the two other poles are not loaded. 4.4.6 Short-circuit va

39、lues See Table 5. Table 5 Nominal voltage 115/200 V a.c., 360 Hz to 800 Hz 0,8 cos 1 Prospective currents 2 000 A r.m.s. Test altitudes On the ground and at maximum altitude (15 000 m, 12 100 Pa) Number of operations 1 CO a+ 2 OCO baBreak operation (for definition see EN 3841-305). bMake operation (

40、for definition see EN 3841-305). EN 3662-006:200610 4.4.7 No-load and load endurance See Table 6. Table 6 Number of operations to be provided No-load Load 5 000 2 500 Main contacts ApplicableInductive 0,6 cos 0,7 n, 115/200 V a.c. - 360 Hz to 800 Hz All ratings Signal contacts ApplicableResistive 3

41、mA, 28 V d.c. Resistive 3 mA, 5 V d.c. Lamp 0,2 A, 28 V d.c. Resistive 0,5 A, 28 V d.c. NOTE 1 One operation corresponds to one closing + one opening. NOTE 2 Tolerances 5 % on current, voltage and frequency values. 4.4.8 Dielectric rigidity See Table 7. Table 7 Closed position Z = 0 m Z = 15 000 m A

42、1, B1, C1 with attachment A1, B1, C1 with 3 A1, B1, C1 with 5 A1, A2 with B1, B2 and C1, C2 B1, B2 with A1, A2 and C1, C2 1 500 V 400 V 3 with 5 3 and 5 with attachment 500 V 150 V Open position Z = 0 m Z = 15 000 m A1, B1, C1 with A2, B2, C2 A1, B1, C1, A2, B2, C2 with attachment 3 and 5 with A1, B

43、1, C1 3 and 5 with A2, B2, C2 A1, A2 with B1, B2 and C1, C2 B1, B2 with A1, A2 and C1, C2 1 500 V 400 V 3 and 5 with attachment 500 V 150 V EN 3662-006:200611 4.4.9 Insulation resistance According to EN 3662-001, Table 5. 4.4.10 Overload endurance Not applicable. 5 Designation EXAMPLE Description bl

44、ock CIRCUIT BREAKER Identity block EN3662-006A20AA Number of EN standard Design code, A: green button Rated current code (see Table 8) Delivery code A (see Table 9) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 6 Rated current code See Table

45、8. Table 8 Rating current n (A) 20 25 30 35 40 45 50 Marking on actuator 20 25 30 35 40 45 50 Rated current code 20A 25A 30A 35A 40A 45A 50A EN 3662-006:200612 7 Delivery codes See Table 9. Table 9 Connection and attachment hardware kits EN 6113 Delivery conditions Delivery code Kit part-No. aInclud

46、ed parts Pieces per part Fitted Supplied separately Connecting screw 6 Connecting lock washer 6 Attachment nut 1 A EN 6113C Attachment lock washer 1 X Attachment nut 1 B EN 6113B Attachment lock washer 1 X aSpare parts could be ordered separately, for information see EN 6113. 8 Marking As defined on

47、 the drawing and unless otherwise specified by contract, marking shall include: the designation defined in Clause 5 on the packaging; the manufacture date (year, week); the manufacturers name or trademark; the electrical diagram and the terminal identification; the manufacturers part number (corresp

48、onding to the part number which includes connection and attachment hardware supplied separately in a bag). NOTE The marking could be on both opposite sides. For electrical diagram printed on the circuit breaker and/or terminal identification numbers see Figure 1. 9 Technical specification See EN 366

49、2-001. EN 3662-006:2006blankBS EN 3662-006:2006BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make su