EN 3726-2004 en Aerospace series - Nuts self-locking clip in heat resisting steel FE-PA2601 (A286) MoS2 coated - Classification 1 100 MPa (at ambient temperature) 425 degrees C《航空.pdf

1、BRITISH STANDARD AEROSPACE SERIES BS EN 3726:2004 Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS 2coated Classification: 1 100 MPa (at ambient temperature) / 425 C The European Standard EN 3726:2004 has the status of a British Standard ICS 49.030.30 BS EN 3726:2004 This Brit

2、ish Standard was published under the authority of the Standards Policy and Strategy Committee on 5 January 2005 BSI 5 January 2005 ISBN 0 580 45189 5 National foreword This British Standard is the official English language version of EN 3726:2004. It supersedes BS EN 3726:2003 which is withdrawn. Th

3、e UK participation in its preparation was entrusted to Technical Committee ACE/12, Aerospace fasteners and fastening systems, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards whi

4、ch implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publica

5、tion does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international

6、/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title pag

7、e, pages 2 to 6, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3726 November 2004 ICS 49.030.30 Su

8、persedes EN 3726:2003 English version Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS2 coated - Classification: 1 100 MPa (at ambient temperature) / 425 C Srie arospatiale - crous pincer, freinage interne, en acier rsistant chaud FE-PA2601 (A286), revtus Mo

9、S2 - Classification : 1 100 MPa ( temprature ambiante ) / 425 C Luft- und Raumfahrt - Klemmuttern, selbstsichernd, aus hochwarmfestem Stahl FE-PA2601 (A286), MoS2- beschichtet - Klasse: 1 100 MPa (bei Raumtemperatur) / 425 C This European Standard was approved by CEN on 11 September 2003. CEN member

10、s are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application

11、 to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the sam

12、e status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, S

13、lovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for

14、CEN national Members. Ref. No. EN 3726:2004: E EN 3726:2004 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Required characteristics.4 4 Designation 6 5 Marking .6 6 Technical specification .6 EN 3726:2004 (E) 3 Foreword This document (EN 3726:2004) has been prepared by the Europe

15、an Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to

16、its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the latest by May 2005. This document supersedes EN 3726

17、:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lat

18、via, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 3726:2004 (E) 4 1 Scope This standard specifies the characteristics of self-locking clip nuts in FE-PA2601, MoS 2coated, for aerospace applications. Classif

19、ication: 1 100 MPa 1)/ 425 C 2)2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) appl

20、ies. ISO 5855-2, Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts EN 2424, Aerospace series Marking of aerospace products EN 2491, Aerospace series Molybdenum disulphide dry lubricants Coating methods EN 3638, Aerospace series Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) Consuma

21、ble electrode remelted Solution and precipitation treated Sheet, strip and plate 0,5 mm a 10 mm 3)EN 3639, Aerospace series Heat resisting alloy FE-PA2601 Softened and cold worked Wire for forged fasteners D 15 mm 900 MPa R m 1 100 MPa 3)EN 3752, Aerospace series Nuts, self-locking, MJ threads, in h

22、eat resisting steel FE-PA2601 (A286), MoS 2coated Classification: 1 100 MPa (at ambient temperature) / 425 C Technical specification 3 Required characteristics 3.1 Configuration Dimensions Tolerances Masses The configuration of the clip nut in this standard, see Figure 1, is given as an example only

23、. Forms not stated are at the manufacturers option. Only the maximum overall dimensions given in the Table 1 and the interchangeability requirements are imposed. The minimum dimensions are limited by the requirements of the technical specification. Dimensions and tolerances are in millimetres. They

24、apply before MoS 2coating. 3.2 Materials Nut element: EN 3638 or EN 3639 Clip: EN 3638 3.3 Surface treatment EN 2491 1) Correspond to the minimum tensile stress which the nut is able to withstand at ambient temperature without breaking or cracking when tested with a bolt of a higher strength class.

25、2) Maximum test temperature of the parts 3) Published as AECMA Prestandard at the date of publication of this standard EN 3726:2004 (E) 5 Key 1 form out-of-round in this area to achieve the self-locking requirement (tooling marks permissible). 2 thread 3 marking 4 pitch diameter Figure 1 Table 1 Thr

26、ead aA F H K L M N P R T V W X Code Designation 0,5 max. max. 0,5 0,5 min 0,5 0,15 0,5 0,5 0,05 max. min. Mass kg/1 000 parts Panel thickness range 040 MJ40,7-4H6H 5,8 2,5 050 MJ50,8-4H6H 5,5 6,45 6,9 7 5,2 0,50 13,0 0,25 2,6 060 MJ61-4H5H 8,5 8,05 8,8 2,7 10 1,6 10 6,6 0,75 0,75 0,63 18,5 0,30 4,3

27、0,9 to 2,0 aIn accordance with ISO 5855-2 6,3 EN 3726:2004 (E) 6 4 Designation EXAMPLE Description block NUT Identity block EN3726-060 Number of this standard Thread code (see Table 1) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 5 Marking E

28、N 2424, style F, as indicated on Figure 1. 6 Technical specification EN 3752 blankBS EN 3726:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europ

29、e and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our produc

30、ts and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BS

31、I offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001.

32、 Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.

33、Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Con

34、tact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membershi

35、p Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright

36、 Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in an

37、y form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.