EN 3773-006-2017 en Aerospace series - Circuit breakers single-pole temperature compensated rated currents 1 A to 25 A - Part 006 6 3 mm blade terminal - Product standard.pdf

1、Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 APart 006: 6,3 mm blade terminal - Product standardBS EN 3773-006:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM

2、 EN 3773-006 June 2017 ICS 49.060 English Version Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 006: 6,3 mm blade terminal - Product standard Srie arospatiale - Disjoncteurs unipolaires compenss en temprature, intensits nominales 1 A 25

3、A - Partie 006 : Raccordement par lame 6,3 mm - Norme de produit Luft- und Raumfahrt - Schutzschalter, einpolig, temperaturkompensiert, Nennstrme von 1 A bis 25 A - Teil 006: Flachsteckverbinder 6,3 mm - ProduktnormThis European Standard was approved by CEN on 20 February 2017. CEN members are bound

4、 to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN

5、-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre ha

6、s the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lu

7、xembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-

8、1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3773-006:2017 ENational forewordThis British Standard is the UK implementation of EN 3773-006:2017.The UK participation in its preparation was entrusted to Technica

9、l Committee ACE/6, Aerospace avionic electrical and fibre optic technology.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct

10、application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 96342 1ICS 49.060Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Com

11、mittee on 31 August 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 3773006:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3773-006 June 2017 ICS 49.060 English Version Aerospace series - Circuit breakers, single-pole, temperature compensated, rat

12、ed currents 1 A to 25 A - Part 006: 6,3 mm blade terminal - Product standard Srie arospatiale - Disjoncteurs unipolaires compenss en temprature, intensits nominales 1 A 25 A - Partie 006 : Raccordement par lame 6,3 mm - Norme de produit Luft- und Raumfahrt - Schutzschalter, einpolig, temperaturkompe

13、nsiert, Nennstrme von 1 A bis 25 A - Teil 006: Flachsteckverbinder 6,3 mm - ProduktnormThis European Standard was approved by CEN on 20 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status

14、 of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, Germ

15、an). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia

16、, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey

17、and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref.

18、 No. EN 3773-006:2017 EBS EN 3773006:2017EN 3773-006:2017 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Dimensions and mass 4 4 Characteristics . 7 5 Designation. 11 6 Rated current code 11 7 Hardware delivery codes 12 8 Marking 12 9 Technical specification . 12 BS E

19、N 3773006:2017EN 3773-006:2017 (E) 3 European foreword This document (EN 3773-006:2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard

20、has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by D

21、ecember 2017, and conflicting national standards shall be withdrawn at the latest by December 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such p

22、atent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedoni

23、a, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 3773006:2017EN 3773-006:2017 (E) 4 1 Scope This European St

24、andard specifies the characteristics of single-pole circuit breakers, temperature compensated with a rated current from 1 A to 25 A, used in aircraft on-board circuits at a temperature between 55 C and 125 C and at an altitude of 15 000 m max. These circuit breakers are operated by a push-pull type

25、single push button (actuator), with delayed action “trip-free“ tripping. They will continue to function up to the short-circuit current. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dat

26、ed references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2282, Aerospace series Characteristics of aircraft electrical supplies EN 3773-001, Aerospace series Circuit breakers, single-pole, temperature

27、compensated, rated currents 1 A to 25 A Part 001: Technical specification EN 3841-100, Aerospace series Circuit breakers Test methods Part 100: General EN 3841-505, Aerospace series Circuit breakers Test methods Part 505: Strength of main terminals EN 6113, Aerospace series Circuit breaker, connecti

28、ng and attachment hardware EN 9133, Aerospace series Quality Management Systems Qualification Procedure for Aerospace Standard Products FED-STD-595C, Colors used in government procurement 1)IEC 60934, Circuit-breakers for equipment 2)TR 6083, Aerospace series Cut-outs for installation of electrical

29、components 3)3 Dimensions and mass 3.1 Dimensional characteristics The circuit breakers do not have to correspond to the pictorial illustration, only the dimensions given shall be adhered to. The mounting surface is the contact surface with the circuit breaker panel. See Figure 1. 1) Published by: D

30、oD National (US) Mil. Department of Defense (http:/www.defenselink.mil/). 2) Published by: IEC International Electrotechnical Commission (http:/www.iec.ch/). 3) Published as ASD-STAN Technical Report at the date of publication of this standard by AeroSpace and Defence industries Association of Europ

31、e - Standardization (ASD-STAN) (www.asd-stan.org) BS EN 3773006:2017EN 3773-006:2017 (E) 5 Standard push button (S): Dimensions are in millimetres BS EN 3773006:2017EN 3773-006:2017 (E) 6 Extra length push button (L): Dimensions are in millimetres Key 1 Push button released 7 Mounting surface 2 Push

32、 button pressed 8 Marking, see Clause 8 9 Optional hole compliant to IEC 60934, Annex E 3 Black conical barrel (C version) 4 Metric barrel version (M version) 10 Silver plated blade according to IEC 60934, Annex E 5 Black colour according to FED-STD-595B 11 Rated current marking (white on black) 6 W

33、hite 12 Positioning lug in accordance with the panel cut-out, as per TR 6083C202 Figure 1 Circuit breakerBS EN 3773006:2017EN 3773-006:2017 (E) 7 3.2 Electrical diagram See Figure 2. Push button released: CB open. Push button pressed: CB closed. Key 1 Supply 2 Load Load and supply can be inverted. F

34、igure 2 Electrical diagram 3.2.1 Mass Mass shall not exceed 20 g. 3.3 Panel Mounting Thickness: 1,5 mm to 3 mm. 4 Characteristics 4.1 Material, surface treatment See EN 3773-001. 4.2 Mechanical characteristics 4.2.1 Fasteners None 4.2.2 Recommended tightening torque of attaching nut for installation

35、 (4,00 0,25) Nm (for version with threaded barrel and if nut is needed). 4.2.3 Recommended tightening torque of connection hardware for installation With 6,3 mm terminal blades, test EN 3841-505 is not applicable. BS EN 3773006:2017EN 3773-006:2017 (E) 8 4.2.4 Resistance to vibrations 4.2.4.1 Combin

36、ed test: ambient temperature at 70 C and vibrations Sinusoidal : 10 g-PK, see EN 3773-001. Random : 5,8 Grms, see EN 3773-001. Low frequencies : 10 g-PK, see EN 3773-001. 4.2.4.2 Combined test: ambient temperature at 85 C, altitude and vibrations Sinusoidal : 3 g-PK, see EN 3773-001. 4.2.5 Resistanc

37、e to shocks 50 g-PK, see EN 3773-001. 4.2.6 Mechanical endurance See Table 6. 4.3 Environment characteristics 4.3.1 Humidity See EN 3773-001. 4.3.2 Corrosion See EN 3773-001. 4.3.3 Contaminating liquids See EN 3773-001. 4.3.4 Overvoltage caused by lightning See EN 3773-001. 4.3.5 Electrical characte

38、ristics 4.3.6 Nominal voltage of operational circuits See Table 1. Table 1 Nominal voltage 28 V d.c. 26 V a.c., frequency 400 Hz, single-phase 115 V a.c., frequency 400 Hz, single-phase When using on a variable frequency aircraft power supply, according to EN 2282, limit values (for voltage and freq

39、uency) shall be specified. BS EN 3773006:2017EN 3773-006:2017 (E) 9 4.3.7 Voltage drop at nand low current See Table 2. Table 2 Ratings A 1 2 2,5 3 4 5 6 7,5 10 15 20 25 U max. at n V 1,10 0,75 0,70 0,55 0,45 0,35 0,35 0,30 0,30 0,25 0,25 0,20 U max. at = 100 mA mV 110 40 30 18 12 8 8 4 3 2,5 2,5 2,

40、5 NOTE The test shall be performed when the contact is established (no switching). 4.3.8 Minimum and maximum tripping thresholds See Table 3. Table 3 Overload (in % of n) Temperatures C Ratings Minimum thresholds value 1 h Maximum thresholds value 1 h On ground At 15 000 m On ground 23 5 All 115 105

41、 140 55 5 115 105 160 70 5 105 100 140 125 5 100 80 140 4.3.9 Overload trip See Table 4. Table 4 Overload (in % of n) 200 500 1 000 Temperatures C Ratings A Trip time s 23 5 1 to 3 2 to 13 0,15 to 2,50 0,035 to 0,600 4 to 15 4 to 18 20 to 25 6 to 20 55 5 All 40 125 5 1,5 BS EN 3773006:2017EN 3773-00

42、6:2017 (E) 10 4.3.10 Short-circuit values See Table 5. Table 5 Nominal voltage 28 V d.c. 115 V a.c., 400 Hz a Prospective currents 65 n L/R 1 ms 0,8 cos 1 65 n or 1 000 A r.m.s. (value the most favourable) Test altitudes On the ground and at maximum altitude 15 000 m Number of operations 1 CO b + 2

43、OCO c + 1 CO + 2 OCO a115 V a.c. covers 26 V a.c. bRemoval of short-circuit. cApplication of a short-circuit. 4.3.11 No-Load and load endurance See Table 6. Table 6 Number of operations to be provided No-load Load 5 000 2 500 2 500 2 500 2 500 All ratings Main contacts Applicable Resistive Low curre

44、nt 100 mA, 28 V d.c. (rating 3 A) Resistive n, 28 V d.c. Inductive L/R = 5 ms n, 28 V d.c. Inductive 0,6 cos 0,7 n, 115 V a.c. - 400 Hz NOTE 1 One operation corresponds to one closing and one opening. NOTE 2 Tolerances 5 % on current, voltage and frequency values. 4.3.12 Dielectric rigidity See Tabl

45、e 7. Voltage at 15 000 m Table 7 Closed position Z = 0 m Z = 15 000 m 1 and 2 with attachment 1 500 V d.c. 400 V d.c. Open position Z = 0 m Z = 15 000 m 1 with 2 1 and 2 with attachment 1 500 V d.c. 400 V d.c. BS EN 3773006:2017EN 3773-006:2017 (E) 11 4.3.13 Insulation resistance 100 M (measurement

46、points identical to dielectric rigidity points). 4.3.14 Overload endurance Not applicable. 5 Designation 5.1 Product designation EXAMPLE Description block CIRCUIT BREAKER Identity block EN3773-00610ACS Number of EN standard Rated current code (see Table 8) M = Metric threading C = Conical barrel wit

47、h no threading S = Standard push button L = Extra length push button NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 5.2 Procurement designation EXAMPLE Description block CIRCUIT BREAKER Identity block EN3773-00610ACSC Number of EN standard Har

48、dware delivery code NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 6 Rated current code See Table 8. Table 8 Ratings n 1 2 2,5 3 4 5 6 7,5 10 15 20 25 Marking on actuator 1 2 2 3 4 5 6 7 10 15 20 25 Rated current code 01A 02A 2A5 03A 04A 05A 0

49、6A 7A5 10A 15A 20A 25A BS EN 3773006:2017EN 3773-006:2017 (E) 12 7 Hardware delivery codes See Table 9. Table 9 Hardware delivery code Connection and attachment hardware kits EN 6113 Delivery conditions Kit part-No. a Fitted Supplied separately A EN 6113B1 X B EN 6113B1 X C Without connection and attachment hardware kits aSpare parts could be ordered separately, for information see EN 6113 8 Marking As defined on the drawing and unless otherwise