EN 3841-508-2004 en Aerospace series - Circuit breakers - Test methods - Part 508 Centrifugal acceleration《航空航天系列 断路器的试验方法 第508部分 离心式加速》.pdf

1、BRITISH STANDARD AEROSPACE SERIES BS EN 3841-508:2004 Circuit breakers Test methods Part 508: Centrifugal acceleration The European Standard EN 3841-508:2004 has the status of a British Standard ICS 49.060 BS EN 3841-508:2004 This British Standard was published under the authority of the Standards P

2、olicy and Strategy Committee on 22 February 2005 BSI 22 February 2005 ISBN 0 580 45544 0 National foreword This British Standard is the official English language version of EN 3841-508:2004. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electri

3、cal and fibre optic technology, to Subcommittee ACE/6/5, Circuit breakers, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publicati

4、ons referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessa

5、ry provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpr

6、etation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 4, an inside back cover and a back

7、 cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN3841508 December2004 ICS49.060 Englishversion AerospaceseriesCircuitbreakersTestmethodsP

8、art508: Centrifugalacceleration SriearospatialeDisjoncteursMthodesdessais Partie508:Acclrationcentrifuge LuftundRaumfahrtSchutzschalterPrfverfahrenTeil 508:Zentrifugalbeschleunigung ThisEuropeanStandardwasapprovedbyCENon10September2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulations

9、whichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(En

10、glish,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,Franc

11、e, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassar

12、t,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN3841508:2004:EEN 3841-508:2004 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Method 4 3.1 Mounting.4 3.2 Procedure .4 4 Requirement.4 EN 3841-508:2004 (E) 3 F

13、oreword This document (EN 3841-508:2004) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associatio

14、ns and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national standards shall

15、 be withdrawn at the latest by June 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hu

16、ngary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 3841-508:2004 (E) 4 1 Scope This standard specifies a method of verifying the capability of circuit breakers to withstand

17、 centrifugal acceleration. It shall be used together with EN 3841-100. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced

18、document (including any amendments) applies. ISO 2669, Environmental tests for aircraft equipment Steady-state acceleration EN 3841-100, Aerospace series Circuit breakers Test methods Part 100: General 3 Method 3.1 Mounting The circuit breakers shall be mounted in the centrifuge on a rotating suppor

19、t according to 4.2 and 4.3 of EN 3841-100. The electrical connection shall be made with the cables of the section specified in EN 3841-100, Table 1. The connection cables shall be attached to the support approximately 100 mm from the terminals. The circuit breakers and the cables shall be mounted wi

20、th the torque indicated in the product standard. The circuit breakers shall be shielded from air flow by a screen. 3.2 Procedure The behaviour of the circuit breakers in steady-state acceleration shall be tested according to ISO 2669. The test shall be carried out for six planes of the main axis of

21、the circuit breakers. Two tests in each direction are required per circuit breaker: 1st test: 10 min in the open position; 2nd test: 10 min in the closed position, at 90 % of current rating. The acceleration value shall be specified in the technical specification. During the test, it shall be establ

22、ished that the contacts do not close for a period 10 s (circuit breakers in the open position) or open for a period 10 s (circuit breakers in the closed position). 4 Requirement Requirements in accordance with technical specification and product standard. blankBS EN 3841-508:2004 BSI 389 Chiswick Hi

23、gh Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by ame

24、ndment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard

25、would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the

26、latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In

27、 response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards t

28、hrough its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members

29、 of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding on

30、line access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the inte

31、rnational standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Th

32、is does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.