ImageVerifierCode 换一换
格式:PDF , 页数:20 ,大小:1.59MB ,
资源ID:711343      下载积分:10000 积分
快捷下载
登录下载
邮箱/手机:
温馨提示:
如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
如填写123,账号就是123,密码也是123。
特别说明:
请自助下载,系统不会自动发送文件的哦; 如果您已付费,想二次下载,请登录后访问:我的下载记录
支付方式: 支付宝扫码支付 微信扫码支付   
注意:如需开发票,请勿充值!
验证码:   换一换

加入VIP,免费下载
 

温馨提示:由于个人手机设置不同,如果发现不能下载,请复制以下地址【http://www.mydoc123.com/d-711343.html】到电脑端继续下载(重复下载不扣费)。

已注册用户请登录:
账号:
密码:
验证码:   换一换
  忘记密码?
三方登录: 微信登录  

下载须知

1: 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。
2: 试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。
3: 文件的所有权益归上传用户所有。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 本站仅提供交流平台,并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

版权提示 | 免责声明

本文(EN 3844-2-2011 en Aerospace series - Flammability of non metallic materials - Part 2 Small burner test horizontal - Determination of the horizontal flame propagation《航空航天系列 非金属材料的可.pdf)为本站会员(王申宇)主动上传,麦多课文库仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文库(发送邮件至master@mydoc123.com或直接QQ联系客服),我们立即给予删除!

EN 3844-2-2011 en Aerospace series - Flammability of non metallic materials - Part 2 Small burner test horizontal - Determination of the horizontal flame propagation《航空航天系列 非金属材料的可.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 3844-2:2011Aerospace series Flammability of non metallicmaterialsPart 2: Small burner test, horizontal Determination of the horizontal flamepropagationBS EN 3844-2:2011 BRI

2、TISH STANDARDNational forewordThis British Standard is the UK implementation of EN 3844-2:2011.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/65, Non-metallic materials for aerospace purposes(excluding textiles).A list of organizations represented on this committee c

3、an beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 73880 7ICS 13.220.40; 49.025.99Compliance with a British Standard cannot confer immunity fromlega

4、l obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2011.Amendments issued since publicationDate Text affectedBS EN 3844-2:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3844-2 November 2011 ICS 49.025.15 Englis

5、h Version Aerospace series - Flammability of non metallic materials - Part 2: Small burner test, horizontal - Determination of the horizontal flame propagation Srie arospatiale - Inflammabilit des matriaux non mtalliques - Partie 2: Essai au brleur, horizontal - Dtermination de la propagation horizo

6、ntale de la flammeLuft- und Raumfahrt - Entflammbarkeit nichtmetallischer Werkstoffe - Teil 2: Kleinbrenner-Prfung, waagerecht - Bestimmung der waagerechten Flammenausbreitung This European Standard was approved by CEN on 10 March 2011. CEN members are bound to comply with the CEN/CENELEC Internal R

7、egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN m

8、ember. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions

9、. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloven

10、ia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nat

11、ional Members. Ref. No. EN 3844-2:2011: EBS EN 3844-2:2011EN 3844-2:2011 (E) 2 Contents Foreword . 31 Scope . 42 Normative references . 43 Terms and definitions . 44 Principle of method 45 Designation . 56 Test apparatus 57 Test specimens . 68 Conditioning 79 Burner adjustment 710 Test procedure 711

12、 Calculation . 812 Report. 8Bibliography . 15BS EN 3844-2:2011EN 3844-2:2011 (E) 3 Foreword This document (EN 3844-2:2011) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules

13、of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or

14、 by endorsement, at the latest by May 2012, and conflicting national standards shall be withdrawn at the latest by May 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for iden

15、tifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Ger

16、many, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 3844-2:2011EN 3844-2:2011 (E) 4 1 Scope This European Standard specifies the test method

17、for the determination of the horizontal flame propagation of non metallic materials when subjected to a small flame. This test method is also used for testing non metallic materials which have to meet the test criteria for the horizontal Bunsen burner test. It is used for evaluation of non metallic

18、materials or constructions used in the interiors of aerospace vehicles but may be used in other applications as specified in applicable procurement and regulatory documents. This standard should be used to measure and describe the properties of non metallic materials, products or assemblies in respo

19、nse to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However results of this test may be used as elements of a fire risk assessment which takes into

20、 account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references,

21、 the latest edition of the referenced document (including any amendments) applies. ASTM-D 5025, A laboratory burner used for small-scale burning test on plastic materials 1) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 flame spread rate di

22、stance travelled by a flame front during its propagation, per unit time, under specified test conditions NOTE In this test, it is the speed with which a flame front moves across a test specimen mounted horizontally. 3.2 time of flame application length of time the burner flame is applied to the spec

23、imen 3.2 burn length distance in millimetres from the original specimen edge to the farthest evidence of damage of the test specimen due to that areas combustion, including areas of partial consumption, charring, or embrittlement, but not including areas sooted, stained, warped or discoloured, nor a

24、reas where material has shrunk or melted away from the heat 4 Principle of method Testing is performed on a specimen that is held horizontal. A burner flame, having defined parameters, is applied to the specimen for a defined period of time. The after flame time and the burn length is measured. The

25、occurrence of drips and their after flame time is measured. 1) Published by: ASTM National (US) American Society for Testing and Materials http:/www.astm.org/. BS EN 3844-2:2011EN 3844-2:2011 (E) 5 5 Designation EXAMPLE Description block HORIZONTAL BUNSEN BURNER TEST Identity block EN3844-2 Number o

26、f this standard 6 Test apparatus 6.1 Test cabinet Tests shall be conducted in a draught-free cabinet, as shown in Figure 1. Details and dimensions of the test cabinet are given in Figure 2. The cabinet shall have a removable cover which either contains a pyrex observation window with a 8,5 mm wide v

27、entilating clearance all around, 50 mm away from the edges, or 28 equally spaced, 12,5 mm ventilating holes distributed over the cover evenly. 1 mm thick metal sheet shall be used for the bottom surface and the cabinet shall have six equally spaced 12,5 mm ventilating holes along each side, placed 4

28、5 mm above the lower end of the side wall. It is recommended to paint the entire inside back walls of the cabinet mat black to facilitate the viewing of the test specimen. Cabinets of larger dimensions may be used if it has been proven that similar results are obtained. It is suggested that the cabi

29、net be located inside an exhaust hood for clearing the cabinet of smoke and fumes after each test. 6.2 Specimen holder The specimen holder shall be fabricated of corrosion-resistant metal. A specimen holder shall be provided, such that the exposed area of the specimen is 50 mm 305 mm. An example for

30、 a construction is given in Figure 3. Each of the rectangular frames must be 6,5 mm in thickness. An example for a construction is given in Figure 3. 6.3 Burner 6.3.1 Burner type The burner shall be a Bunsen or Tirril type, have a 9,5 mm inside diameter barrel, and shall be equipped with a needle va

31、lve to adjust the gas flow rate and thereby adjust the flame height. The burner shall have no air supplied either directly or by aspiration. The Bunsen burner defined in ASTM-D 5025 has been found acceptable. BS EN 3844-2:2011EN 3844-2:2011 (E) 6 6.3.2 Burner fuel Bottled methane gas shall be used a

32、s burner fuel. Natural gas is also acceptable if it contains more than 90 % methane. 6.3.3 Plumbing for gas supply The necessary gas connections and the applicable plumbing shall be essentially as specified in Figure 4. A control valve system with a delivery rate designed to furnish gas to the burne

33、r under a pressure of at least 5 kPa at the burner inlet shall be installed between the gas supply and the burner. 6.3.4 Flame height indicator There shall be a flame height indicator spaced 25 mm from the burner barrel and extending above the burner, as shown in Figure 5. The indicator shall have t

34、wo prongs, 8 mm in length, marking the distances, 22 mm and 38 mm above the top of the burner. When the flame is properly adjusted, then the tip of the flame shall be at the 38 mm prong and for pure methane the tip of the inner cone of the flame will be at the 22 mm prong. The flame height indicator

35、 shall be removable. 6.4 Timer One or more stop-watches or other timers, calibrated and graduated to the nearest 0,1 s, shall be used to measure the time of flame application and the time of the specimen burning. 6.5 Ruler A ruler or a scale, calibrated and graduated to the nearest 1 mm, shall be us

36、ed to measure the burn length and for specimen preparation. 7 Test specimens 7.1 Number of specimens At least three specimens shall be prepared and tested. 7.2 Specimens orientation For materials which may have anisotropic flammability properties (i.e. different properties in different directions, s

37、uch as machine and cross-machine direction for extrusions, warp and weft for woven fabrics, etc.), the specimens shall be tested in both directions. The values for every direction have to be averaged and reported separately. 7.3 Specimens preparation The specimens shall be a rectangle of at least 75

38、 mm 305 mm. 7.4 Specimens size Mark gauge lines on the back surface (opposite the exposed surface) of the specimen as shown in Figure 6. BS EN 3844-2:2011EN 3844-2:2011 (E) 7 8 Conditioning Condition specimens at (23 2) C and at (50 5) % relative humidity for min. 24 h. Remove only one specimen at a

39、 time from the conditioning environment immediately before being tested. 9 Burner adjustment Assure that the air supply to the burner is shut off. Open the stopcock in the gas line fully. Light the burner. Adjust the gas flowrate to produce a flame height of 38 mm. 10 Test procedure Make sure that t

40、he test cabinet is essentially draught free. Place the burner at least 76 mm away from the test position. Mount the specimen into the specimen holder so that the clamped edges are held securely. One short edge of the specimen has to be flush with the open end of the specimen holder. The exposed surf

41、ace of the specimen, defined in the test specification shall be face down. Insert the holder with the specimen into the cabinet. Close the cabinet door, and keep it closed during the test. Assure that the lower edge of the specimen is 19 mm above the level of the top of the burner. Start the timer a

42、s soon as the burner is in test position. Apply the flame for 15 s, then withdraw the burner by moving the burner into start position. Note the times and/or locations on the specimen at which the following events occur: if the flame front crosses the 38 mm gauge line, note the elapsed time in second

43、s, t38, at which the crossing occurs; if the flame front crosses the 292 mm gauge line, note the elapsed time in seconds, t292, at which the crossing occurs; if the specimen burns very slowly so that the flame front does not reach the 292 mm gauge line within 5 min or if the flame extinguishes befor

44、e reaching the 292 mm gauge line, the total burn length in millimetres and the elapsed time in seconds may be noted and the test terminated. After all flaming ceases, open the cabinet door slowly to clear the test cabinet of fumes and smoke. Remove any material from the bottom of the cabinet that fe

45、ll from the specimen. If necessary, clean the test cabinet window prior to testing the next specimen. BS EN 3844-2:2011EN 3844-2:2011 (E) 8 11 Calculation Depending on the burning behaviour of the material calculate the flame spread rate as follows: a) if the flame front self-extinguished before cro

46、ssing the 292 mm gauge line: no calculation, record the flame spread rate as 0; b) if the most advanced part of the flame front reached the 292 mm gauge line calculate as follows: flame spread rate mm/min = () s)(s/min60mm38 29238292tt ; c) if the specimen burnt very slowly so that the flame front d

47、oes not reach the 292 mm gauge line within 5 min: no calculation, record the burn length in millimetres. 12 Report The test report shall include the following data: complete description of the specimen material and specimen construction (material designation, manufacturers identification, manufactur

48、ing number, construction, specimen thickness, density, etc.); manufacturer/supplier and order number; statement of conformity given by the quality assurance of specimen manufacturer; designation of the test method; flame spread rate for each specimen tested and the average value; burn length for eac

49、h specimen tested; specimen orientation (if applicable); observations about melting, sagging, delamination, or other behaviour that affected the exposed surface area or mode of burning occurred, and the time in seconds at which such behaviour occurred; changes in test procedure required by the test specification; name and address of the test laboratory/organisation; date of testing; operators name and signature of the responsible engineer. BS EN 3844-2:2011EN

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1