EN 3867-2004 en Aerospace series - Pipe couplings loose flanges and seals - Flanges in titanium alloy TI-P64001《航空航天系列 管连接件 松套法兰和密封件 TI-P64001钛合金法兰》.pdf

1、BRITISH STANDARD AEROSPACE SERIES BS EN 3867:2004 Pipe couplings, loose flanges and seals Flanges in titanium alloy TI-P64001 The European Standard EN 3867:2004 has the status of a British Standard ICS 49.080 BS EN 3867:2004 This British Standard was published under the authority of the Standards Po

2、licy and Strategy Committee on 6 January 2005 BSI 6 January 2005 ISBN 0 580 45178 X National foreword This British Standard is the official English language version of EN 3867:2004. It supersedes BS EN 3867:2003 which is withdrawn. The UK participation in its preparation was entrusted to Technical C

3、ommittee ACE/12, Aerospace fasteners and fastening systems, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in

4、 this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a

5、 contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or propos

6、als for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI co

7、pyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3867 November 2004 ICS 49.080 Supersedes EN 3867:2003 English version Aerospace series - Pipe couplin

8、gs, loose flanges and seals - Flanges in titanium alloy TI-P64001 Srie arospatiale - Raccords, brides amovibles et joints - Brides en alliage de titane TI-P64001 Luft- und Raumfahrt - Rohrverbindungen mit losen Flanschen und Flanschdichtungen - Flansche aus Titanlegierung TI-P64001 This European Sta

9、ndard was approved by CEN on 11 September 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concern

10、ing such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own la

11、nguage and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

12、 Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploit

13、ation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3867:2004: EEN 3867:2004 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Required characteristics.4 4 Designation 6 5 Marking .6 6 Quality assurance6 EN 3867:2004 (E) 3 Foreword This docume

14、nt (EN 3867:2004) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Ser

15、vices of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the lat

16、est by May 2005. This document supersedes EN 3867:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germa

17、ny, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 3867:2004 (E) 4 1 Scope This standard specifies the characteristics of flanges for pipe couplings in TI

18、-P64001, for aerospace applications. NOTE Assembly in accordance with TR 4053 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the refe

19、renced document (including any amendments) applies. ISO 286-2, ISO system of limits and fits Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts EN 2424, Aerospace series Marking of aerospace products EN 3310, Aerospace series Titanium alloy TI-P64001 Not heat treat

20、ed Grade 2 forging stock, for annealed forgings a or D 360 mm 1)EN 3311, Aerospace series Titanium alloy TI-P64001 Annealed Bar for machining D 150 mm 1)EN 9100, Aerospace series Quality management systems Requirements (based on ISO 9001:2000) and Quality systems Model for quality assurance in desig

21、n, development, production, installation and servicing (based on ISO 9001:1994) TR 4053, Aerospace series Pipe couplings, loose flanges and seals in titanium alloy Assembly recommendations 2)3 Required characteristics 3.1 Configuration Dimensions Tolerances Masses See Figure 1 and Table 1. Dimension

22、s and tolerances are in millimetres. 3.2 Materials EN 3310 or EN 3311 1)Published as AECMA Prestandard at the date of publication of this standard 2)Published as AECMA Technical Report at the date of publication of this standard EN 3867:2004 (E) 5 R a6,3 Remove sharp edges 0,2 to 0,4 Key 1 chamfer 0

23、,4 40 to 50 2 three equidistant holes diameter 5,4 H13 3 marking 4 boring diameter D 4 5 admissible form 6 radius 0,7 to 0,9 Figure 1 R a3,2 EN 3867:2004 (E) 6 Table 1 D 1D 2D 3D 4E F R 1R 2Mass bDiameter code Tube nominal diameter H13aH10a0 0,3 + 0,2 5 0 0 , 120 12 14,1 21,4 16,2 29 13,8 56,2 90 14

24、0 14 16,1 23,4 18,2 31 14,8 49,4 98 160 16 19,1 26,4 21,2 34 4,5 2 16,3 44,8 110 180 18 21,1 28,4 23,2 36 17,3 43,5 143 200 20 23,1 30,4 25,2 38 19,3 35,9 195 220 22 25,1 32,4 27,2 40 5,5 2,5 20,3 36,6 194 250 25 28,1 35,4 30,2 43 21,8 261 280 28 31,1 38,4 33,2 46 23,3 37,5 267 320 32 35,1 42,4 37,2

25、 50 25,3 38,9 292 400 40 43,1 50,4 45,2 58 6,5329,3 42 340 aTolerance in accordance with ISO 286-2 bMass quoted in kg/1 000 parts 4 Designation EXAMPLE Description block FLANGE Identity block EN3867-120 Number of this standard Diameter code (see Table 1) NOTE If necessary, the code I9005 shall be pl

26、aced between the description block and the identity block. 5 Marking EN 2424, category A, as indicated on Figure 1. 6 Quality assurance EN 9100 blankBS EN 3867:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for prepari

27、ng British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.

28、 It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside

29、front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications

30、should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that hav

31、e been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also

32、 available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of s

33、tandards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information abo

34、ut BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract m

35、ay be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols,

36、 and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.