EN 4056-003-2016 en Aerospace series - Cable ties for harnesses - Part 003 Plastic cable ties - Operating temperatures -65 to 105 and -65 to 150 - Product standard《航空航天系列-导线电缆扎匝-第0.pdf

1、BS EN 4056-003:2016Aerospace series Cable tiesfor harnessesPart 003: Plastic cable ties Operatingtemperatures -65 C to 105 C and -65 Cto 150 C Product standardBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 4056-003:2016 BRITISH STANDARDNational forewordThis Br

2、itish Standard is the UK implementation of EN 4056-003:2016The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to its secretary.This p

3、ublication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 92078 3ICS 49.060Compliance with a British Standard cannot confer immunity

4、fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2016.Amendments/corrigenda issued since publicationDate Text affectedBS EN 4056-003:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4056-003 September

5、2016 ICS 49.060 English Version Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating temperatures -65 C to 105 C and -65 C to 150 C - Product standard Srie arospatiale - Frettes de cblage pour harnais - Partie 003: Frettes en plastique - Tempratures dutilisation -65

6、 C 105 C et -65 C 150 C - Norme de produit Luft- und Raumfahrt - Befestigungsbnder fr Leitungsbndel - Teil 003: Kabelbinder aus Kunststoff -Betriebstemperatur -65 C bis 105 C und -65 C bis 150 C - Produktnorm This European Standard was approved by CEN on 2 January 2016. CEN members are bound to comp

7、ly with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

8、 Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the sa

9、me status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg

10、, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 201

11、6 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4056-003:2016 EBS EN 4056-003:2016EN 4056-003:2016 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Required characteristic

12、s 4 5 Tests and requirements 7 6 Quality assurance 8 7 Designation 8 8 Marking . 8 9 Packaging and storage . 8 BS EN 4056-003:2016EN 4056-003:2016 (E) 3 European foreword This document (EN 4056-003:2016) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardizatio

13、n (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given

14、 the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2017, and conflicting national standards shall be withdrawn at the latest by March 2017. Attention is drawn to the possibility that some of the elements of this document may be th

15、e subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgi

16、um, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer

17、land, Turkey and the United Kingdom. BS EN 4056-003:2016EN 4056-003:2016 (E) 4 1 Scope This European Standard defines the required characteristics of cable ties with either internal or external serrations manufactured entirely from plastics material, for installation under controlled tension on airc

18、raft cable harnesses. It shall be used together with EN 4056-001. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references,

19、the latest edition of the referenced document (including any amendments) applies. EN 2825, Aerospace series Burning behaviour of non metallic materials under the influence of radiating heat and flames Determination of smoke density EN 2826, Aerospace series Burning behaviour of non metallic material

20、s under the influence of radiating heat and flames Determination of gas components in the smoke EN 4056-001, Aerospace series Cable ties for harnesses Part 001: Technical specification EN 4057 (all parts), Aerospace series Cable ties for harnesses Test methods MS 90387, Tool, hand, adjustable for pl

21、astic and metal tie down straps 1)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4056-001 apply. 4 Required characteristics 4.1 Dimensions See Figure 1 and Table 1. 1) Published by: DoD National (US) Mil. Department of Defense. http:/www.defenselink.

22、mil/ BS EN 4056-003:2016EN 4056-003:2016 (E) 5 Figure 1 Cable tie Table 1 Dimensions and mass Size code Recommended bundle diameter Length of tie Thickness of strap Width of strap Head dimensions Loop tensile strength Mass of 10 ties related to minimum length Length Width Height A B E F D C mm mm mm

23、 mm mm mm mm N g min. max. min. max. min. max. max. max. max. min. max. P 1,6 20 92 1,1 2,3 2,5 4,3 5,0 4,0 80 3,0 R 1,6 50 190 1,3 3,3 3,8 6,3 6,6 5,0 120 9,5 S 1,6 80 280 1,3 3,3 3,8 6,3 6,6 5,0 120 17,0 T 1,6 80 280 1,3 4,4 4,8 6,7 8,6 6,0 220 21,0 U 5,0 100 335 1,9 6,6 7,1 9,4 13,5 8,3 530 65,0

24、V 1,6 110 360 1,3 4,4 4,8 6,7 8,5 6,0 220 24,5 W a 5,0 230 700 1,9 7,6 8,9 9,4 13,5 8,3 400 94 X a5,0 130 456 1,9 7,4 7,8 9,4 13,5 8,3 530 86 aBased on NSA 835401. 4.2 Material 4.2.1 Temperature rating (type) The ties shall be capable of use within the following temperature ranges: Type 1: 65 C to 1

25、05 C, 135 C; Type 2: 65 C to 150 C. 4.2.2 Flammability class Available as class 1 and class 2. BS EN 4056-003:2016EN 4056-003:2016 (E) 6 See Table 3 for requirements. 4.2.3 Colour See Table 2 of EN 4056-001. 4.2.4 Burning behaviour Materials for cable tie shall satisfy the following requirements whe

26、n tested to EN 2825 and EN 2826. 4.2.4.1 Smoke density The maximum specific optical smoke density (average) shall not exceed: Dm = 200 (flaming mode); Dm = 150 (non flaming mode). 4.2.4.2 Toxicity The average concentration in parts per million (ppm) of the following gas components shall not exceed t

27、he following limits after a test duration of 4 min. Gas component Limit of concentration ppm Hydrogen Fluoride HF 100 Hydrogen Chloride HCl 150 Hydrogen Cyanide HCN 150 Sulphur Dioxide SO2100 Hydrogen Sulphide H2S 100 Nitrous Gases NO/NO2100 Carbon Monoxide CO 1 000 4.3 U.V. resistance U.V. resistan

28、t cable ties shall meet the requirements of EN 4057-307, given in Table 3. 4.4 Application tool Cable ties shall be applied using a tensioning tool as specified in MS 90387, verificated in accordance with EN 4057-407 ensuring that the application force does not exceed the values shown in Table 2. Ta

29、ble 2 Maximum recommended application force Size code N P 60 R 100 S 150 T 300 U 150 V 300 W 320 X 300 BS EN 4056-003:2016EN 4056-003:2016 (E) 7 5 Tests and requirements See Table 3 and EN 4056-001. Table 3 Tests EN 4057- Designation of the test Requirement 201 Visual examination There shall be no s

30、harp or abrasive edges. 202 Examination of mass and dimensions The mass and dimensions shall be in accordance with Table 1 of this European Standard. 301 Salt mist test Not applicable 302 Flammability After removal of the burner from the specimen, any flame shall extinguish within 5 s. If there are

31、no flaming droplets (or particles) during the test, and the flame extinguishes within 5 s, the specimen will be classified as Class 1. If there are flaming droplets (or particles) but all the flames extinguish within 5 s, the specimen will be classified as class 2. 303 Resistance to fluids All the s

32、pecimens shall meet the minimum loop tensile strength as stated in Table 1 of this European Standard. 304 Loop tensile strength at maximum working temperature All specimens shall meet at least 60 % of the minimum loop tensile strength as stated in Table 1 of this European Standard. 305 Colour fastne

33、ss (applicable only to coloured ties) The colour fastness of the specimen shall not be less than wool standard number 6. 306 Heat ageing test The tensile strength shall not be lower than that specified in the appropriate product standard. The elongation at break of the aged, flat samples shall be no

34、t less than 75 % of the elongation at break of the unaged flat samples as defined in the product standard. 307 Resistance to ultra violet radiation All the specimens shall meet at least 95 % of requirement for EN 4057-401. The average elongation at break shall be not less than 60 % of that of the un

35、exposed standard. 401 Loop tensile strength All the specimens shall meet the minimum loop tensile strength as stated in Table 1 of this European Standard. 402 Life cycle After the vibration test: There shall be no damage to the cable insulation when viewed with a 10 times magnification aid. The spec

36、imens shall be examined for cracks, breaking and/or release of the locking device during removal from the vibration test harness. All specimens shall meet the minimum loop tensile strength as stated in Table 1 of this European Standard. 404 Low temperature installation All the specimens shall meet t

37、he minimum loop tensile strength as stated in Table 1 of this European Standard. 405 Compass safe distance Not applicable 406 Locking device retention (ties containing metal locking barbs only). Not applicable 407 Verification of application tool settings See Table 2 ( 5 %). BS EN 4056-003:2016EN 40

38、56-003:2016 (E) 8 6 Quality assurance Quality assurance requirements to be in accordance with EN 4056-001. 7 Designation EXAMPLE Description block CABLE TIE Identity block EN4056-003B1ROB Number of this standard Material code (see EN 4056-001, Table 1) Flammability class (see EN 4056-001, 4.2) Size

39、code (see EN 4056-001, Table 6) Colour code (see EN 4056-001, Table 2) Variant code (see EN 4056-001, Table 7) NOTE If necessary, the code I9005 may be placed between the description block and the identity block. 8 Marking See EN 4056-001. 9 Packaging and storage See EN 4056-001. This page deliberat

40、ely left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards In

41、stitution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through o

42、ur open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at o

43、r contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and fo

44、reign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyr

45、ight in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not

46、adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole name

47、d user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purch

48、ased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to

49、 share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (B