EN 4102-2005 en Aerospace series - Aluminium alloy AL-P2219-T81 - Clad sheet and strip - 0 5 mm less than or equal to a less than or equal to 6 mm《航空航天系列 铝合金AL-P2219-T81 覆层薄板和带材 0 .pdf

1、BRITISH STANDARD AEROSPACE SERIES BS EN 4102:2005 Aerospace series Aluminium alloy AL-P2219-T81 Clad sheet and strip 0,5 mm ua u6 mm The European Standard EN 4102:2005 has the status of a British Standard ICS 49.025.20 BS EN 4102:2005 This British Standard was published under the authority of the St

2、andards Policy and Strategy Committee on 13 October 2005 BSI 13 October 2005 ISBN 0 580 46348 6 National foreword This British Standard is the official English language version of EN 4102:2005. The UK participation in its preparation was entrusted by Technical Committee ACE/61, Metallic materials fo

3、r aerospace purposes, to Subcommittee ACE/61/-/24, Light alloys, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referr

4、ed to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisi

5、ons of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, o

6、r proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BS

7、I copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4102 June 2005 ICS 49.025.20 English version Aerospace series - Aluminium alloy AL-P2219-T81 - Cl

8、ad sheet and strip - 0,5 mm a 6 mm Srie arospatiale - Alliage daluminium AL-P2219-T81 - Tles et bandes plaques - 0,5 mm a 6 mm Luft- und Raumfahrt - Aluminiumlegierung AL-P2219-T81 - Bleche und Bnder, plattiert - 0,5 mm a 6 mm This European Standard was approved by CEN on 22 April 2005. CEN members

9、are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application t

10、o the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same

11、status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slo

12、venia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CE

13、N national Members. Ref. No. EN 4102:2005: EEN 4102:2005 2 Foreword This document (EN 4102:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Stand

14、ard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the lates

15、t by December 2005, and conflicting national standards shall be withdrawn at the latest by December 2005. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all

16、such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irelan

17、d, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 4102:2005 3 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general orga

18、nization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-2. 1 Scope This standard specifies the requirements relating to: Aluminium alloy AL-P2219- T81 Clad sheet and strip 0,5 mm a 6 mm for aerospace application. 2 Normative references The followin

19、g referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 4258, Aerospace series Metallic materials General organiza

20、tion of standardization Links between types of EN standards and their use. EN 4400-2, Aerospace series Aluminium and aluminium alloy wrought products Technical specification Part 2: Sheet and strip. 1)EN 4500-2, Aerospace series Metallic materials Rules for drafting and presentation of material stan

21、dards Part 2: Specific rules for aluminium, aluminium alloys and magnesium alloys. 1) 1) Published as AECMA Prestandard at the date of publication of this standard. 4 1 Material designation Aluminium alloy AL-P2219- Others Element Si Fe Cu Mn Mg Zn Ti V Zr Each Total Al min. 5,8 0,20 0,02 0,05 0,10

22、2 Chemical composition % max. 0,20 0,30 6,8 0,40 0,02 0,10 0,10 0,15 0,25 0,05 0,15 Base 3 Method of melting 4.1 Form Clad sheet and strip 4.2 Method of production Rolled 4.3 Limit dimension(s) mm 0,5 a 6 5 Technical specification EN 4400-2 Delivery condition T31 T81 6.1 Heat treatment 530 C 540 C /

23、 WQ 40 C + approximately 1 % cold work + = ambient / t 5 d 530 C 540 C / WQ 40 C + approximately 1 % cold work + 171 C 182 C / 16 h t 20 h 6.2 Delivery condition code K U Use condition T81 T81 7 Heat treatment Delivery condition + 171 C 182 C / 16 h t 20 h Delivery condition Characteristics 8.1 Test

24、 sample(s) See EN 4400-2. 8.2 Test piece(s) See EN 4400-2. 8.3 Heat treatment Use condition. 9 Dimensions concerned mm 0,5 a 1,0 1,0 a 2,5 2,5 a 6 10 Thickness of cladding on each face % 8 4 2 11 Direction of test piece LT LT LT 12 Temperature C Ambient Ambient Ambient 13 Proof stress R p0,2 MPa 255

25、 285 295 14 Strength R mMPa 340 380 400 15 Elongation A % A 50 mm 6 A 50 mm 7 A 50 mm 7 16 T Reduction of area Z % 17 Hardness 18 Shear strength R cMPa 19 Bending k 20 Impact strength 21 Temperature C 22 Time h 23 Stress a MPa 24 Elongation a % 25 Rupture stress RMPa 26 C Elongation at rupture A % 2

26、7 Notes (see line 98) EN 4102:20055 44 External defects See EN 4400-2. 62 Diffusion in the cladding See EN 4400-2. See EN 4400-2. Material designation Aluminium alloy AL-P7072- Others Element Si + Fe Cu Mn Mg Zn Each Total Al min. 0,8 72 Cladding chemical composition % 7 max. 0,7 0,10 0,10 0,10 1,3

27、0,05 0,15 Base 82 Batch uniformity See EN 4400-2. 5 T31 T81 7 Electrical conductivity See EN 4400-2. See EN 4400-2. 95 Marking inspection See EN 4400-2. 96 Dimensional inspection See EN 4400-2. 98 Notes 99 Typical use EN 4102:20056 100 Product qualification See EN 4400-2. Qualification programme to

28、be agreed between manufacturer and purchaser. EN 4102:2005blankBS EN 4102:2005 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the intern

29、ational level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We

30、 would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an

31、 individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 899

32、6 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on stan

33、dards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Informatio

34、n Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. T

35、el: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists

36、 in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any me

37、ans electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.