EN 4122-2018 en Aerospace series - Shank nuts self-locking in heat resisting steel FE-PA2601 (A286) silver plated on thread - Classification 1 100 MPa (at ambient temperature) 650.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1 100 MPa (at ambient temperature) / 650 CBS EN 4122:2018EUROPEAN STANDARD NORME EUROPENNE

2、 EUROPISCHE NORM EN 4122 May 2018 ICS 49.030.30 Supersedes EN 4122:2004 English Version Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1 100 MPa (at ambient temperature) / 650 C Srie arospatiale - crous sertir, freinag

3、e interne, en acier rsistant chaud FE-PA2601 (A286), argents sur filetage - Classification : 1 100 MPa ( temprature ambiante ) / 650 C Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, aus hochwarmfestem Stahl FE-PA2601 (A286), Gewinde versilbert - Klasse: 1 100 MPa (bei Raumtemperatur) / 650 C

4、This European Standard was approved by CEN on 22 January 2018. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical ref

5、erences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a C

6、EN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedon

7、ia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATIO

8、N EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4122:2018 E National forewordThis British Standard is the UK implementation

9、of EN 4122:2018. It supersedes BS EN 4122:2004, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee ACE/12, Aerospace fasteners and fastening systems.A list of organizations represented on this committee can be obtained on request to its secretary.This pub

10、lication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 51747 1ICS 49.030.30Compliance with a British Standard cannot confer immuni

11、ty from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 4122:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4122 May

12、 2018 ICS 49.030.30 Supersedes EN 4122:2004 English Version Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1 100 MPa (at ambient temperature) / 650 C Srie arospatiale - crous sertir, freinage interne, en acier rsistant

13、 chaud FE-PA2601 (A286), argents sur filetage - Classification : 1 100 MPa ( temprature ambiante ) / 650 C Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, aus hochwarmfestem Stahl FE-PA2601 (A286), Gewinde versilbert - Klasse: 1 100 MPa (bei Raumtemperatur) / 650 C This European Standard was a

14、pproved by CEN on 22 January 2018. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nati

15、onal standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own langu

16、age and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,

17、 Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NOR

18、MUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4122:2018 E BS EN 4122:2018EN 4122:2018 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative

19、references 4 3 Required characteristics 4 3.1 Configuration Dimensions Tolerances Masses . 4 3.2 Materials . 4 3.3 Surface treatment . 4 4 Designation 6 5 Marking . 6 6 Technical specification 6 BS EN 4122:2018EN 4122:2018 (E) 3 European foreword This document (EN 4122:2018) has been prepared by the

20、 Aerospace and Defence Industries Association of Europe Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, p

21、rior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2018, and conflicting national standards shall be withdrawn at the latest by November 2018. Attention is d

22、rawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 4122:2004. According to the CEN-CENELEC Internal Regulations, the national standards or

23、ganisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembour

24、g, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4122:2018EN 4122:2018 (E) 4 1 Scope This document specifies the characteristics of self-locking shank nuts in FE-PA2601, silver plated on thread, for

25、 aerospace applications. Classification: 1 100 MPa1/ 650 C2. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated referen

26、ces, the latest edition of the referenced document (including any amendments) applies. EN 2399, Aerospace series Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15) Rm 900 MPa Bars for forged bolts D 25 mm EN 2424, Aerospace series Marking of aerospace products EN 2786, Aerospace series Electrolytic s

27、ilver plating of fasteners EN 3004, Aerospace series Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286) Classification: 1 100 MPa (at ambient temperature) / 650 C Technical specification EN 3639, Aerospace series Heat resisting alloy FE-PA2601 Softened and cold worked Wire for

28、forged fasteners D 15 mm 900 MPa Rm 1 100 MPa3ISO 5855-2, Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts 3 Required characteristics 3.1 Configuration Dimensions Tolerances Masses See Figure 1 and Table 1. Dimensions and tolerances are in millimetres. They apply after silver plating

29、 for thread surface. 3.2 Materials EN 2399 or EN 3639. 3.3 Surface treatment EN 2786 on thread and chamfers. Thickness: thread MJ6: 5 m min. on thread flanks; 1Correspond to the minimum tensile stress which the nut is able to withstand at ambient temperature without breaking or cracking when tested

30、with a bolt of a higher strength class. 2Maximum test temperature of the parts. 3Published as ASD-STAN Pre-Standard at the date of publication of this standard http:/www.asd-stan.org/. BS EN 4122:2018EN 4122:2018 (E) 5 thread MJ5: shall show complete coverage, without thickness requirement. Coating

31、may extend to counterbore and chamfers at manufacturers option, without thickness requirement. Key 1 values applicable before silver plating. Thread surface will be as achieved by normal methods of manufacture. 2 remove sharp edges 0,1 to 0,4. 3 not convex 4 chamfer or radius 0,08 max. 5 thread 6 fo

32、rm out-of-round in this area to achieve the self-locking requirement (tooling marks permissible). 7 pitch diameter 8 marking in these areas but not in locking area Details of form not stated are left to the manufacturers discretion. aLimit of the blend radius Figure 1 BS EN 4122:2018EN 4122:2018 (E)

33、 6 Table 1 ThreadaC E H J L P S T Z Mass kg/1 000 parts Code Designation null0,1 null0,25 h14 +0,10nom.Tol. 00,1null0,1 null0,25max. 050 MJ5null0,8-4H6H 7 13 7 5,2 1,8 null0,10 6,5 9,5 2,4 8,5 2,7 060 MJ6null1-4H5H 8 14 8 6,2 7,5 10,5 9,5 3,35 070 MJ7null1-4H5H 9 16 9 7,2 2,8 8,5 11,5 3,4 10,5 4,16

34、080 MJ8null1-4H5H 10 17 10 8,2 3,2 null0,15 9,5 12,5 3,9 11,5 5,4 aIn accordance with ISO 5855-2. In the self-locking zone, the tolerances apply before forming out-of-round. 4 Designation EXAMPLE NOTE If necessary, the code I9005 shall be placed between the description block and the identity block.

35、5 Marking EN 2424, style A, as indicated on Figure 1. 6 Technical specification EN 3004. BS EN 4122:2018This page deliberately left blankEN 4122:2018 (E) 6 Table 1 ThreadaC E H J L P S T Z Mass kg/1 000 parts Code Designation null0,1 null0,25 h14 +0,10nom.Tol. 00,1null0,1 null0,25max. 050 MJ5null0,8

36、-4H6H 7 13 7 5,2 1,8 null0,10 6,5 9,5 2,4 8,5 2,7 060 MJ6null1-4H5H 8 14 8 6,2 7,5 10,5 9,5 3,35 070 MJ7null1-4H5H 9 16 9 7,2 2,8 8,5 11,5 3,4 10,5 4,16 080 MJ8null1-4H5H 10 17 10 8,2 3,2 null0,15 9,5 12,5 3,9 11,5 5,4 aIn accordance with ISO 5855-2. In the self-locking zone, the tolerances apply be

37、fore forming out-of-round. 4 Designation EXAMPLE NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 5 Marking EN 2424, style A, as indicated on Figure 1. 6 Technical specification EN 3004. This page deliberately left blankBSI is the national body

38、responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring togethe

39、r business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizat

40、ions of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team

41、 or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased.If you need international and foreign standards from other Standards Dev

42、elopment Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as th

43、e international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit,

44、 or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company

45、use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only. Standards purchased in hard copy format: A British Sta

46、ndard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal netw

47、ork, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you.

48、 For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date.You can keep in to

49、uch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member.PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced.To find out more abo