EN 4123-2018 en Aerospace series - Shank nuts self-locking in heat resisting nickel base alloy NI-PH2601 (Inconel 718) silver plated on thread - Classification 1 550 MPa (at ambien.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1 550 MPa (at ambient temperature) / 600 CBS EN 4123:2018EUROPEAN STAND

2、ARD NORME EUROPENNE EUROPISCHE NORM EN 4123 May 2018 ICS 49.030.30 Supersedes EN 4123:2004English Version Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1 550 MPa (at ambient temperature) / 600 C Sri

3、e arospatiale - crous sertir, freinage interne, en alliage rsistant chaud base de nickel NI-PH2601 (Inconel 718), argents sur filetage - Classification : 1 550 MPa ( temprature ambiante ) / 600 C Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, aus hochwarmfester Nickelbasislegierung NI-PH2601

4、(Inconel 718), Gewinde versilbert - Klasse: 1 550 MPa (bei Raumtemperatur) / 600 C This European Standard was approved by CEN on 22 January 2018. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a

5、 national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German).

6、A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyp

7、rus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and U

8、nited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref.

9、No. EN 4123:2018 ENational forewordThis British Standard is the UK implementation of EN 4123:2018. It supersedes BS EN 4123:2004, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee ACE/12, Aerospace fasteners and fastening systems.A list of organizations

10、represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978

11、 0 580 51748 8ICS 49.030.30Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH ST

12、ANDARDBS EN 4123:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4123 May 2018 ICS 49.030.30 Supersedes EN 4123:2004English Version Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1 550 MPa (

13、at ambient temperature) / 600 C Srie arospatiale - crous sertir, freinage interne, en alliage rsistant chaud base de nickel NI-PH2601 (Inconel 718), argents sur filetage - Classification : 1 550 MPa ( temprature ambiante ) / 600 C Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, aus hochwarmfes

14、ter Nickelbasislegierung NI-PH2601 (Inconel 718), Gewinde versilbert - Klasse: 1 550 MPa (bei Raumtemperatur) / 600 C This European Standard was approved by CEN on 22 January 2018. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving thi

15、s European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official v

16、ersions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austr

17、ia, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain

18、, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldw

19、ide for CEN national Members. Ref. No. EN 4123:2018 EBS EN 4123:2018EN 4123:2018 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Required characteristics 4 3.1 Configuration Dimensions Tolerances Masses . 4 3.2 Material . 4 3.3 Surface treatment . 4 4 Designation 6 5 M

20、arking . 6 6 Technical specification 6 BS EN 4123:2018EN 4123:2018 (E) 3 European foreword This document (EN 4123:2018) has been prepared by the Aerospace and Defence Industries Association of Europe Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of th

21、is Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by e

22、ndorsement, at the latest by November 2018, and conflicting national standards shall be withdrawn at the latest by November 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying an

23、y or all such patent rights. This document supersedes EN 4123:2004. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark,

24、Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4123:

25、2018EN 4123:2018 (E) 4 1 Scope This document specifies the characteristics of self-locking shank nuts in NI-PH2601, silver plated on thread, for aerospace applications. Classification: 1 550 MPa1/ 600 C2. 2 Normative references The following documents are referred to in the text in such a way that s

26、ome or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products EN 2786, Aero

27、space series Electrolytic silver plating of fasteners EN 2952, Aerospace series Heat resisting alloy NI-PH2601 Solution treated and cold worked Bar for forged fasteners D 50 mm 1 270 MPa Rm 1 550 MPa3EN 4047, Aerospace series Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2

28、601 (Inconel 718), silver plated Classification: 1 550 MPa (at ambient temperature) / 600 C Technical specification ISO 5855-2, Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts 3 Required characteristics 3.1 Configuration Dimensions Tolerances Masses See Figure 1 and Table 1. Dimensi

29、ons and tolerances are in millimetres. They apply after silver plating for thread surface. 3.2 Material EN 2952. 3.3 Surface treatment EN 2786 on thread only. Thickness: thread MJ6: 5 m min. on thread flanks; thread MJ5: shall show complete coverage, without thickness requirement. 1Correspond to the

30、 minimum tensile stress which the nut is able to withstand at ambient temperature without breaking or cracking when tested with a bolt of a higher strength class. 2Maximum test temperature of the parts. 3Published as ASD-STAN Prestandard at the date of publication of this standard. http:/www.asd-sta

31、n.org/. BS EN 4123:2018EN 4123:2018 (E) 5 Coating may extend to counterbore and chamfers at manufacturers option, without thickness requirement. Key 1 values applicable before silver plating. Thread surface will be as achieved by normal methods of manufacture 2 remove sharp edges 0,1 to 0,4 3 not co

32、nvex 4 chamfer or radius 0,08 max. 5 thread 6 form out-of-round in this area to achieve the self-locking requirement (tooling marks permissible) 7 pitch diameter 8 marking in these areas but not in locking area Details of form not stated are left to the manufacturers discretion aLimit of the blend r

33、adius Figure 1 BS EN 4123:2018EN 4123:2018 (E) 6 Table 1 Threada C E H J L P S T Z Mass kg/1 000 parts Code Designation null0,1 null0,25 h14 +0,10nom.Tol. 00,1null0,1 null0,25max. 050 MJ5null0,8-4H6H 7 13 7 5,2 1,8 null0,10 6,5 9,5 2,4 8,5 2,78 060 MJ6null1-4H5H 8 14 8 6,2 7,5 10,5 9,5 3,45 070 MJ7n

34、ull1-4H5H 9 16 9 7,2 2,8 8,5 11,5 3,4 10,5 4,28 080 MJ8null1-4H5H 10 17 10 8,2 3,2 null0,15 9,5 12,5 3,9 11,5 5,56 aIn accordance with ISO 5855-2. In the self-locking zone, the tolerances apply before forming out-of-round. 4 Designation EXAMPLE NOTE If necessary, the code I9005 shall be placed betwe

35、en the description block and the identity block. 5 Marking EN 2424, style A, as indicated on Figure 1. 6 Technical specification EN 4047. BS EN 4123:2018This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other st

36、andards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators

37、and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standard

38、s to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and dow

39、nload PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased.If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from

40、our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally

41、 licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof

42、 in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 devi

43、ce provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only. Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or i

44、nternal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription produ

45、ct (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go

46、 to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date.You can keep in touch with standards developments and receive substantial

47、discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member.PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced.To f

48、ind out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre availab

49、le, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI pub