EN 4132-2009 en Aerospace series - Bolts normal hexagonal head coarse tolerance normal shank long thread in alloy steel cadmium plated - Classification 1 100 MPa (at ambient temper.pdf

1、BS EN 4132:2009ICS 49.030.20NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Bolts, normalhexagonal head, coarsetolerance normalshank, long thread, inalloy steel, cadmiumplated Classification:1 100 MPa (at ambienttemperature) / 235 CThis British

2、Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 August2009 BSI 2009ISBN 978 0 580 68867 6Amendments/corrigenda issued since publicationDate CommentsBS EN 4132:2009National forewordThis British Standard is the UK implementation of EN 4132:2009.The UK partic

3、ipation in its preparation was entrusted to TechnicalCommittee ACE/12, Aerospace fasteners and fastening systems.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Us

4、ers are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 4132:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4132 July 2009 ICS 49.030.20 English Version Aerospace series - Bolts, normal hexagonal head, coarse tol

5、erance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 C Srie arospatiale - Vis tte hexagonale normale, tige normale tolrance large, filetage long, en acier alli, cadmies - Classification: 1 100 MPa ( temprature ambiante) / 235 C L

6、uft- und Raumfahrt - Sechskantschrauben, langes Gewinde, aus legiertem Stahl, verkadmet - Klasse : 1 100 MPa (bei Raumtemperatur) / 235 C This European Standard was approved by CEN on 23 April 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditi

7、ons for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three

8、official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Aus

9、tria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COM

10、MITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4132:2009: EBS EN 4132:2009EN 4132:2

11、009 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Required characteristics .53.1 Configuration Dimensions Masses 53.2 Tolerances of form and position 53.3 Materials .53.4 Surface treatment 54 Designation 85 Marking .86 Technical specification .8BS EN 4132:2009EN 4132:2009 (E) 3 Fo

12、reword This document (EN 4132:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associatio

13、ns and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shal

14、l be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Re

15、gulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Ne

16、therlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 4132:2009EN 4132:2009 (E) 4 1 Scope This standard specifies the characteristics of bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadm

17、ium plated. Classification: 1 100 MPa 1) / 235 C 2)2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including

18、any amendments) applies. EN 2133, Aerospace series Cadmium plating of steels with specified tensile strength 1 450 MPa, copper, copper alloys and nickel alloys. EN 2137, Steel FE-PL75 1 100 MPa Rm 1 250 MPa Bars De 100 mm Aerospace series.3)EN 2424, Aerospace series Marking of aerospace products. EN

19、 3514, Aerospace series Steel FE-PL711 Hardened and tempered 1 100 Rm 1 300 MPa Bar and wire for bolts De 25 mm. 4) EN 9100, Aerospace series Quality management systems Requirements (based on ISO 9001:2000) and Quality systems Model for quality assurance in design, development, production, installat

20、ion and servicing (based on ISO 9001:1994). EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts. TR 3775, Aerospace series Bolts and pins Materials. 5) ISO 3353-1, Aerospace Lead and runout threads Part 1: Rolled external threads. ISO 5855-2, Aer

21、ospace MJ threads Part 2: Limit dimensions for bolts and nuts. ISO 7689, Aerospace Bolts, with MJ threads, made of alloy steel, strength class 1 100 MPa Procurement specification. ISO 7913, Aerospace Bolts and screws, metric Tolerances of form and position. 1) Minimum tensile strength of the materia

22、l at ambient temperature. 2) Maximum temperature that the bolt can withstand without continuous change in its original characteristics, after return to ambient temperature. The maximum temperature is determined by the surface treatment. 3) Published as ASD Standard at the date of publication of this

23、 standard. 4) Published as ASD Prestandard at the date of publication of this standard. 5) Published as ASD Technical Report at the date of publication of this standard. BS EN 4132:2009EN 4132:2009 (E) 5 3 Required characteristics 3.1 Configuration Dimensions Masses See Figure 1 and Table 1. Dimensi

24、ons and tolerances are expressed in millimetres and apply after surface treatment. 3.2 Tolerances of form and position ISO 7913 3.3 Materials EN 2137, EN 3514 or TR 3775 (alloy steel, classification 1 100 MPa) 3.4 Surface treatment EN 2133, 8 m to 14 m on all surfaces which can be contracted by a 20

25、 mm diameter ball. On all other surfaces, a continuous cadmium plating shall be present, but no value is specified. Black colour option: code B BS EN 4132:2009EN 4132:2009 (E) 6 Values in micrometres apply prior to surface treatment. Break sharp edges 0,1 to 0,4. Details of form not stated are left

26、to the manufacturers discretion Key 1 Continuous surface 2 2 holes D6 optional 3 Thread 4 Conforms to ISO 3353-1 5 Marking Figure 1 3,2 1,6 0,8 BS EN 4132:2009EN 4132:2009 (E) 7 Table 1 Diameter code Thread aD1D2D3D4bD5D6D7E F G h12 min. 0 0,5 min. nom. Tol. H13 H13 min. max. min. 0 0,3 030 MJ30,5 -

27、 4h6h 3 5,5 5,4 2,3 0 0,5 6,5 0,4 0,2 2 040 MJ40,7 - 4h6h 4 6,4 6,4 3 1,1 7,6 0,5 2,5 050 MJ50,8 - 4h6h 5 7,4 5,25 7,4 3,4 0,5 1 1,5 8,7 3 060 MJ61 - 4h6h 6 9,4 6,25 9,3 4,2 1,4 10,9 3,5 070 MJ71 - 4h6h 7 10,3 7,25 10,2 5,2 1,9 12 4 080 MJ81 - 4h6h 8 12,3 8,25 12,2 6,2 14,3 4,5 100 MJ101,25 - 4h6h 1

28、0 16,3 10,25 16 7,9 1,6 2,4 18,9 0,6 0,3 5 120 MJ121,25 - 4h6h 12 18,3 12,25 18 9,8 21,1 6 140 MJ141,5 - 4h6h 14 21,3 14,25 21 11,5 3 24,5 7 160 MJ161,5 - 4h6h 16 23,3 16,25 23 13,5 26,8 8 180 MJ181,5 - 4h6h 18 26,3 18,25 26 15,5 3,8 30,2 9 200 MJ201,5 - 4h6h 20 29,3 20,25 29 17,5 33,6 10 Diameter c

29、ode H J K L1c, d, eL2c, d, eL3L4e, fN R Mass gnom. Tol. min. max. Length code nom. 0 0,3 max. min. hi030 6 h12 0,4 2 12 014 to 042 14 to 42 0,4 0,2 1,201 0,110 040 7 14 016 to 056 16 to 56 2,101 0,198 050 1,35 8 3,25 0,5 4 16 020 to 070 20 to 70 2 0,5 0,3 3,772 0,306 060 1,6 10 h13 4,1 0,7 18 022 to

30、 084 22 to 84 2,3 0,7 0,5 6,823 0,444 070 1,85 11 4,5 20 024 to 098 24 to 98 2, 7 9,380 0,604 080 2,1 13 5,35 22 026 to 112 26 to 112 3 14,331 0,790 100 2,35 17 7,1 0,8 6 25 032 to 140 32 to 140 3,4 0,8 0,6 27,531 1,232 120 2,85 19 7,9 0,9 30 036 to 168 36 to 168 4 0,9 44,482 1,774 140 3,35 22 9,2 1

31、,1 34 040 to 196 40 to 196 4,7 1,1 0,8 66,445 2,416 160 3,85 24 10,05 38 044 to 224 44 to 224 5,4 97,498 3,156 180 4,35 27 11,3 1,3 42 048 to 252 48 to 252 6 1,3 1 136,684 3,994 200 4,85 30 12,6 46 052 to 280 52 to 280 6,7 185,948 4,932 aIn accordance with ISO 5855-2. bD4 max. shall be less than J.

32、cFirst length corresponding to first L4length. dCondition L1min. and L2max. cannot be obtained simultaneously. eIncrements: - 2 for L4 100; - 4 for L4 100. fIf greater lengths are required, they shall be chosen using the above increments. The length code corresponds to the length L4, completed by on

33、e or two zeros to the left, where necessary, to obtain a three digit code. gApproximate values (kg/1 000 pieces), calculated on the basis of 7,85 kg/dm3, given for information purposes only. They apply to bolts without holes. h Value for head and first L4.i Increase for each additional 2 mm of L4. B

34、S EN 4132:2009EN 4132:2009 (E) 8 4 Designation EXAMPLE Description block BOLT Identity block EN4132H050040B Number of this standard Hole code (see Table 2) Diameter code (see Table 1) Length code (see Table 1) Black colour code (see 3.4) NOTE If necessary the originator code I9005 shall be placed be

35、tween the description block and the identity block. Table 2 Holes Code with H without (hyphen) 5 Marking See Table 3 and Figure 1. Table 3 Diameter code EN 2424 Style 030 and 040 N 050 to 120 B 140 to 200 A 6 Technical specification ISO 7689, except for clauses: Approval of manufacturers: see EN 910

36、0; Qualification of bolts: see EN 9133. BS EN 4132:2009This page has been intentionally left blank BS EN4132:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible fo

37、r preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditio

38、ns.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside f

39、ront cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should

40、 beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have

41、been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also availa

42、ble whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof th

43、ese and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyr

44、ight subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or

45、 by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: