EN 4165-002-2015 en Aerospace series - Connectors electrical rectangular modular - Operating temperature 175 continuous - Part 002 Specification of performance and contact arrangem.pdf

1、BSI Standards PublicationBS EN 4165-002:2015Aerospace series Connectors, electrical,rectangular, modular Operating temperature 175 CcontinuousPart 002: Specification of performance andcontact arrangementsIncorporating corrigendum April 2016BS EN 4165-002:2015 BRITISH STANDARDNational forewordThis Br

2、itish Standard is the UK implementation of EN 4165-002:2015,The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to its secretary.This

3、publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 94235 8ICS 49.060Compliance with a British Standard cannot confer immunity

4、 fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2015.Amendments/corrigenda issued since publicationDate Text affected31 May 2016 Implementation of CEN corrigendum April 2016:Figure 9 and Figure 10 modifiedBS EN 4

5、165-002:2007 which is withdrawn.incorporating corrigendum April 2016. It supersedesEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4165-002 July 2015 ICS 49.060 Supersedes EN 4165-002:2007English Version Aerospace series - Connectors, electrical, rectangular, modular -Operating temperature 175

6、C continuous - Part 002: Specification of performance and contact arrangements Srie arospatiale - Connecteurs lectriques rectangulaires modulaires - Temprature dutilisation 175 C continu - Partie 002: Spcification de performances et arrangement de contacts Luft- und Raumfahrt - Elektrischer Rechteck

7、steckverbinder in modularer Bauweise - Betriebstemperatur 175 C konstant - Teil 002: Leistungsdaten und Kontaktanordnungen This European Standard was approved by CEN on 5 March 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving t

8、his European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official

9、 versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Aus

10、tria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swed

11、en, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CE

12、N national Members. Ref. No. EN 4165-002:2015 EIncorporating corrigendum April 2016BS EN 4165-002:2015EN 4165-002:2015 (E) 2 Contents Page European foreword .3 1 Scope 4 2 Normative references 4 3 Terms and definitions .5 4 Synoptic 5 5 Description and codification of shell classes .6 6 Operating co

13、nditions .7 6.1 Combinations of plugs and receptacles .7 6.2 Combinations of protective covers and connectors 7 6.3 Combinations of accessories and connectors .8 6.4 Combinations of chimneys and accessories 8 6.5 Permissible cables and maximum permissible current 8 7 Operating characteristics 10 7.1

14、 Electrical conditions . 10 7.2 Climatic conditions . 10 7.3 Mechanical conditions . 10 8 Models types . 11 9 Modules contact arrangements Series 2 and series 3 . 12 10 Contacts . 16 11 Sealing plugs . 16 12 Rear accessories 16 13 Tooling contacts . 16 14 Tooling accessories for modules 16 15 Assemb

15、ly and wiring instructions 16 Annex A (informative) Synoptic 17 A.1 Synoptic connectors series II and III, classes F and classes W, 2 and 4 modules 17 Synoptic connectors series II, classes J, M and C, 2 and 4 modules 18 Annex B (informative) Synoptic, single module series II, classes M 19 Bibliogra

16、phy . 20 BS EN 4165-002:2015EN 4165-002:2015 (E) 3 European foreword This document (EN 4165-002:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association,

17、this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at t

18、he latest by January 2016, and conflicting national standards shall be withdrawn at the latest by January 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any o

19、r all such patent rights. This document supersedes EN 4165-002:2007. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark,

20、 Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4165-002:201

21、5EN 4165-002:2015 (E) 4 1 Scope This European standard defines a number of conditions common to rectangular electrical modular connectors for receptacles, plugs and rack and panel, with interchangeable modules and continuous operating temperature 175 C. 2 Normative references The following documents

22、, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-209, Aerospace series

23、Elements of electrical and optical connection Test methods Part 209: Current temperature derating EN 3155-002, Aerospace series Electrical contacts used in elements of connection Part 002: List and utilization of contacts EN 3155-082, Aerospace series Electrical contacts used in elements of connecti

24、on Part 082: Contacts, electrical, female, type A, crimp, class S Product standard EN 3197, Aerospace series Design and installation of aircraft electrical and optical interconnection systems EN 4165-001, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C conti

25、nuous Part 001: Technical specification EN 4165-003, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 003: Modules series 2 and series 3 Product standard EN 4165-004, Aerospace series Connectors, electrical, rectangular, modular Operating temp

26、erature 175 C continuous Part 004: Stackable mounting receptacle 2 and 4 modules, series 2 Product standard EN 4165-005, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 005: Stackable mounting receptacle 2 and 4 modules, series 3 Product stan

27、dard EN 4165-006, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 006: Plug for 2 and 4 modules, series 2 Product standard EN 4165-007, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part

28、007: Plug for 2 and 4 modules, series 3 Product standard EN 4165-008, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 008: Rack and panel plug for 2 and 4 modules, series 2 Product standard EN 4165-009, Aerospace series Connectors, electrical

29、, rectangular, modular Operating temperature 175 C continuous Part 009: Rack and panel plug for 2 and 4 modules, series 3 Product standard EN 4165-010, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 010: Rack and panel rear mounted plug 2 an

30、d 4 modules, series 2 Product standard EN 4165-011, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 011: Flange mounting receptacle 2 and 4 modules, series 2 Product standard EN 4165-012, Aerospace series Connectors, electrical, rectangular,

31、modular Operating temperature 175 C continuous Part 012: Flange mounting receptacle 2 and 4 modules, series 3 Product standard BS EN 4165-002:2015EN 4165-002:2015 (E) 5 EN 4165-013, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 013: Cable c

32、lamp 2 and 4 modules for connectors, series 2 and series 3 Product standard EN 4165-014, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 014: Shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3 Product standard EN 4

33、165-015, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 015: Round chimney for accessory (1 per module cavity) Product standard EN 4165-016, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous

34、 Part 016: Double oval chimney for accessory (1 per 2 modules) Product standard EN 4165-017, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 017: Blank chimney for accessory (1 per module cavity) Product standard EN 4165-018, Aerospace series

35、 Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 018: Protective cover for receptacle 2 and 4 modules, series 2 and series 3 Product standard EN 4165-024, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Par

36、t 024: Single module plug Product standard EN 4165-025, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 025: Module receptacle Product norm EN 4165-026, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C

37、 continuous Part 026: Accessories for single modules Product norm EN 4165-027, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 027: Rack and panel rear mounted plug for 2 and 4 modules, series 3 Product standard 1)EN 4529-002, Aerospace serie

38、s Elements of electrical and optical connection Sealing plugs Part 002: Index of products standards 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4165-001 apply. 4 Synoptic For intermountabilities between plugs and receptacles, modules series 2 and

39、series 3, male and female, see Annex A (informative) and Annex B (informative). 1) Published as ASD-STAN Prestandard at the date of publication of this European standard (http:/www.asd-stan.org/).BS EN 4165-002:2015EN 4165-002:2015 (E) 6 5 Description and codification of shell classes See Table 1. T

40、able 1 Material and class Classes Description Connectors C Plug and receptacle with housing (shell), composite material unplated, 500 h resistance to salt mist, maximum operating temperature: 175 C continuous. W Plug and receptacle with housing (shell) olive drab cadmium plated, aluminium alloy, 500

41、 h resistance to salt mist, maximum operating temperature: 175 C continuous. F Plug and receptacle with housing (shell) black nickel plated aluminium alloy, 96 h resistance to salt mist, maximum operating temperature: 175 C continuous. J Plug and receptacle with housing (shell) olive drab cadmium pl

42、ated, composite material, 500 h resistance to salt mist, maximum operating temperature: 175 C continuous. M Plug and receptacle with housing (shell) nickel plated composite material, 500 h resistance to salt mist, maximum operating temperature: 175 C continuous. Protective cover W Protective cover f

43、or plug and receptacle olive drab cadmium plated, aluminium alloy, 500 h resistance to salt spray, maximum operating temperature: 175 C continuous. F Protective cover for plug and receptacle black nickel plated aluminium alloy, 96 h resistance to salt spray, maximum operating temperature: 175 C cont

44、inuous. M Protective cover for single module receptacle, nickel plated composite shell, 500 h resistance to salt spray, maximum operating temperature: 175 C continuous. Accessories C Cable clamp composite material unplated, 500 h resistance to salt mist, maximum operating temperature: 175 C continuo

45、us W Cable clamp in olive drab cadmium plated, aluminium alloy, 500 h resistance to salt spray, maximum operating temperature: 175 C continuous. F Cable clamp in black nickel plated, aluminium alloy, 96 h resistance to salt spray, maximum operating temperature: 175 C continuous. W Accessory with hou

46、sing (shell) olive drab cadmium plated, aluminium alloy, 500 h resistance to salt mist, maximum operating temperature 175 C continuous. F Accessory with housing (shell) black nickel plated, aluminium alloy, 96 h resistance to salt mist, maximum operating temperature 175 C continuous J Accessory in o

47、live drab cadmium plated, composite shell, 500 h resistance to salt spy, maximum operating temperature: 175 C continuous. M Accessory nickel plated composite shell, 500 h resistance to salt spray, maximum operating temperature: 175 C continuous. Chimney for rear accessories W Blank, round, or double

48、 oval chimney, olive drab cadmium plated aluminium alloy, 500 h resistance to salt spray, maximum operating temperature: 175 C continuous. F Blank, round, or double oval chimney, black nickel plated, aluminium alloy, 96 h resistance to salt spray, maximum operating temperature: 175 C continuous. B B

49、lank, round, or double oval chimney, nickel plated, aluminium alloy, 48 h resistance to salt spray, maximum operating temperature: 175 C continuous. BS EN 4165-002:2015EN 4165-002:2015 (E) 7 6 Operating conditions 6.1 Combinations of plugs and receptacles See Annex A (informative) and Annex B (informative). Table 2 shows the recommended com