EN 4165-013-2016 en Aerospace series - Connectors electrical rectangular modular - Operating temperature 175 continuous - Part 013 Cable clamp 2 and 4 modules for connectors series.pdf

1、BS EN 4165-013:2016Aerospace series Connectors, electrical, r e c t a n g u l a r , m o d u l a r Operating temperature 175 C continuousPart 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 Product standardBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2

2、013 15:06BS EN 4165-013:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 4165-013:2016. It supersedes BS EN 4165-013:2005 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and

3、fibre optic technology.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016.

4、Published by BSI Standards Limited 2016ISBN 978 0 580 87660 8 ICS 49.060 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2016.Amendments/corrigenda i

5、ssued since publicationDate T e x t a f f e c t e dBS EN 4165-013:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4165-013 November 2016 ICS 49.060 Supersedes EN 4165-013:2005English Version Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 C contin

6、uous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standard Srie arospatiale - Connecteurs lectriques rectangulaires modulaires - Temprature dutilisation 175 C continu - Partie 013 : Serre-cbles 2 et 4 modules pour connecteurs, srie 2 et srie 3 - Norme de pr

7、oduit Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise, Betriebstemperatur 175 C konstant - Teil 013: Gehuse mit Zugentlastung fr Steckverbinder mit 2 und 4 Modulen, Serie 2 und Serie 3 - Produktnorm This European Standard was approved by CEN on 29 November 2014. CEN m

8、embers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applic

9、ation to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Mana

10、gement Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvi

11、a, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix

12、 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4165-013:2016 EBS EN 4165-013:2016EN 4165-013:2016 (E) 2 Contents Page European foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions 4 4 Req

13、uired characteristics . 4 5 Cable clamp 5 6 Designation 8 7 Marking . 8 8 Technical specification 8 BS EN 4165-013:2016EN 4165-013:2016 (E) 3 European foreword This document (EN 4165-013:2016) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN

14、). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status

15、 of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2017, and conflicting national standards shall be withdrawn at the latest by May 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of pa

16、tent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 4165-013:2005. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europ

17、ean Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slov

18、enia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4165-013:2016EN 4165-013:2016 (E) 4 1 Scope This European Standard defines cable clamp for 2 and 4 module connectors, series 2 and series 3 used in the family of rectangular electrical connectors. 2 Normative references The follo

19、wing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospa

20、ce series Marking of aerospace products EN 4165-001, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 001: Technical specification EN 4165-002, Aerospace series Connector, electrical, rectangular, modular Operating temperature 175 C continuous

21、 Part 002: Specification of performance and contact arrangements 3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 4165-001 apply. 4 Required characteristics See Figure 1 and Figure 3 for 2 modules; Figure 2 and Figure 4 for 4 modules. BS EN 4165-013:20

22、16EN 4165-013:2016 (E) 5 5 Cable clamp 5.1 For 2 modules classes W and F See Figure 1. Dimensions are in millimetres. Key 1 see Figure 5 Figure 1 5.2 For 4 modules classes W and F See Figure 2. Dimensions are in millimetres. Key 1 See Figure 5 Figure 2 BS EN 4165-013:2016EN 4165-013:2016 (E) 6 5.3 F

23、or 2 modules class C See Figure 3. Dimensions are in millimetres. Key 1 See Figure 6. Figure 3 5.4 For 4 modules class C See Figure 4. Dimensions are in millimetres. Key 1 See Figure 6 Figure 4 BS EN 4165-013:2016EN 4165-013:2016 (E) 7 5.5 Cable clamp class See Table 1. Table 1 Class Description W C

24、able clamp with housing (shell) olive drab cadmium plated, aluminium alloy, 500 hours resistance to salt mist, maximum operating temperature 175 C continuous F Cable clamp with housing (shell) black nickel plated, aluminium alloy, 96 hours resistance to salt mist, maximum operating temperature 175 C

25、 continuous C Monobloc cable clamp. composite material, maximum operating temperature 175 C continuous 5.6 Intermateability for series 2 and series 3 See Figure 5. Dimensions are in millimetres. Key 1 4 modules 70,9 max. 2 modules 40,4 max. Figure 5 BS EN 4165-013:2016EN 4165-013:2016 (E) 8 See Figu

26、re 6. Dimensions are in millimetres. Key 1 4 modules 70,9 max. 2 modules 40,4 max. Figure 6 6 Designation EXAMPLE 7 Marking Marking shall be applied to the cable clamp. This marking shall include: the identity block as defined in suitable product standard; the date of manufacture (year week); the ma

27、nufacturers name or trade mark. 8 Technical specification See EN 4165-001. This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards

28、and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embod

29、ied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your orga

30、nization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, thr

31、ough our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British

32、 Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may no

33、t transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in

34、 soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time

35、. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This inc

36、ludes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact th

37、e BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and

38、international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI S

39、ubscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-U

40、ser Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Stan

41、dards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.Useful ContactsCus

42、tomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20