EN 4167-2004 en Aerospace series - Clips spring tension three parts - Inner clips in heat resisting steel FE-PA2601 (A286)《航空航天系列 三部分弹簧张力夹具 耐热钢FE-PA2601(A286)制内夹具》.pdf

1、BRITISH STANDARD AEROSPACE SERIES BS EN 4167:2004 Clips, spring tension, three parts Inner clips in heat resisting steel FE-PA2601 (A286) The European Standard EN 4167:2004 has the status of a British Standard ICS 49.080 BS EN 4167:2004 This British Standard was published under the authority of the

2、Standards Policy and Strategy Committee on 25 January 2005 BSI 25 January 2005 ISBN 0 580 45319 7 National foreword This British Standard is the official English language version of EN 4167:2004. It supersedes BS EN 4167:2003 which is withdrawn. The UK participation in its preparation was entrusted

3、to Technical Committee ACE/12, Aerospace fasteners and fastening systems, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications

4、referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary p

5、rovisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretat

6、ion, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cov

7、er. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4167 December 2004 ICS 49.080 Supersedes EN 4167:2003 English version Aerospace series

8、- Clips, spring tension, three parts - Inner clips in heat resisting steel FE-PA2601 (A286) Srie arospatiale - Colliers de fixation ressort en trois parties - Demi-colliers intrieurs, en acier rsistant chaud FE-PA2601 (A286) Luft- und Raumfahrt - Rohrschellen, federnd, dreiteilig - Innenschelle aus

9、hochwarmfestem Stahl FE-PA2601 (A286) This European Standard was approved by CEN on 11 September 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

10、Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation u

11、nder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,

12、Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stas

13、sart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4167:2004: EEN 4167:2004 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Required characteristics.4 4 Designation 6 5 Marking .6 6 Qua

14、lity assurance6 EN 4167:2004 (E) 3 Foreword This document (EN 4167:2004) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the app

15、roval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2005, and conf

16、licting national standards shall be withdrawn at the latest by June 2005. This document supersedes EN 4167:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus,

17、 Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 4167:2004 (E) 4 1 Scope This standard specifie

18、s the characteristics of inner clips, three part clips, spring tension, in FE-PA2601 for applications at a maximum temperature of 260 C, for aerospace applications. They shall be assembled with parts from EN 4166 and EN 4168. 2 Normative references The following referenced documents are indispensabl

19、e for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products EN 2516, Aerospace series Passivation of cor

20、rosion resisting steels and decontamination of nickel base alloys EN 3638, Aerospace series Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) Consumable electrode remelted Solution and precipitation treated Sheet, strip and plate 0,5 mm a 10 mm 1)EN 4166, Aerospace series Clips, spring tension, thre

21、e parts PTFE bushes EN 4168, Aerospace series Clips, spring tension, three parts Outer clips in heat resisting steel FE-PA2601 (A286) EN 9100, Aerospace series - Quality management systems - Requirements (based on ISO 9001:2000) and Quality systems - Model for quality assurance in design, developmen

22、t, production, installation and servicing (based on ISO 9001:1994) 3 Required characteristics 3.1 Configuration Dimensions Tolerances Masses See Figure 1 and Table 1. Dimensions and tolerances are in millimetres. They apply after passivation. 3.2 Materials EN 3638 3.3 Surface treatment EN 2516 3.4 H

23、eat surface Precipitation heat treated after forming 3.5 Hardness 260 HV to 345 HV 1) Published as AECMA Prestandard at the date of publication of this standard EN 4167:2004 (E) 5 Key 1 break sharp edges 0,1 to 0,4 2 10,4 to 10,8 3 direction of grain 4 R = 7 to 9 5 marking 6 6 to 6,2 7 2 to 2,3 Figu

24、re 1 Table 1 Diameter code A B E F Mass kg/1 000 parts max. min. max. min. max. min. max. min. 004 7,8 7,2 13,6 13,1 17 006 9,8 9,2 14,5 14 19 008 11,8 11,2 15,5 15 22 010 13,8 13,2 16,4 15,9 0,9 0,7 25 012 15,8 15 17,8 17,3 36 014 17,8 17 18,7 18,2 39 016 19,8 19 19,6 19,1 43 018 18 21,8 21 20,5 48

25、 020 23,8 23 21,5 21 50 025 28,8 28 24 23,5 58 032 35,8 35 27,5 27 1,1 0,9 5,8 5,5 71 EN 4167:2004 (E) 6 4 Designation EXAMPLE Description block INNER CLIP Identity block EN4167-012 Number of this standard Diameter code (see Table 1) NOTE If necessary, the code I9005 shall be placed between the desc

26、ription block and the identity block. 5 Marking EN 2424, style A, as indicated on Figure 1. 6 Quality assurance The manufacturers quality systems shall conform to EN 9100. blankBS EN 4167:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national

27、body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the la

28、test amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which

29、 can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and for

30、eign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI impl

31、ementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic i

32、nformation services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discount

33、s on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.

34、bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and P

35、atents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necess

36、ary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.