EN 4297-2017 en Aerospace series - Nuts hexagon self-locking by plastic ring normal height normal across flats in corrosion resisting steel passivated - Classification 900 MPa (at .pdf

1、BS EN 4297:2017Aerospace series Nuts,hexagon, self-locking byplastic ring, normal height,normal across flats, in corrosionresisting steel, passivated Classification: 900 MPa (atambient temperature) / 120 CBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 4297:201

2、7 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 4297:2017. The UK participation in its preparation was entrusted to TechnicalCommittee ACE/12, Aerospace fasteners and fastening systems. A list of organizations represented on this committee can be obtained on r

3、equest to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 92612 9 ICS 49.030.30 Compliance with a Bri

4、tish Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 4297:2017EUROPEAN STANDARD NORME EUROP

5、ENNE EUROPISCHE NORM EN 4297 January 2017 ICS 49.030.30 English Version Aerospace series - Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in corrosion resisting steel, passivated - Classification: 900 MPa (at ambient temperature) / 120 C Srie arospatiale - crous hex

6、agonaux, freinage interne par bague plastique, hauteur normale, surplats normaux, en acier rsistant la corrosion, passivs - Classification: 900 MPa ( temprature ambiante) / 120 C Luft- und Raumfahrt - Sechskantmuttern, selbstsichernd mit Plastikring, mit normaler Schlsselweite, aus korrosionsbestndi

7、gem Stahl, passiviert - Klasse: 900 MPa (bei Raumtemperatur) / 120 C This European Standard was approved by CEN on 11 March 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standa

8、rd without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any

9、 other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repub

10、lic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. E

11、UROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4297:2017 EBS

12、 EN 4297:2017EN 4297:2017 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Required characteristics 4 4 Designation 6 5 Marking . 7 6 Technical specification 7 BS EN 4297:2017EN 4297:2017 (E) 3 European foreword This document (EN 4297:2017) has been prepared by the Aero

13、space and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of

14、ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2017, and conflicting national standards shall be withdrawn at the latest by July 2017. Attention is dra

15、wn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the followi

16、ng countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Nor

17、way, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4297:2017EN 4297:2017 (E) 4 1 Scope This European Standard specifies the characteristics of hexagonal nuts, self-locking by plastic ring, normal height, normal across flats, i

18、n corrosion resisting steel, passivated. Classification: 900 MPa 1)/ 120 C 2). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated

19、 references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products EN 2516, Aerospace series Passivation of corrosion resisting steels and decontamination of nickel base alloys EN 9100, Quality Management Systems - R

20、equirements for Aviation, Space and Defense Organizations EN 9133, Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts ISO 5855-2, Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts ISO 5858, Aerospace Nuts, self-locking, with maximum op

21、erating temperature less than or equal to 425 degrees C Procurement specification ISO 8788, Aerospace Nuts, metric Tolerances of form and position 3 Required characteristics 3.1 Configuration Dimensions Masses See Figure 1 and Table 1. Dimensions and tolerances are expressed in millimetres and apply

22、 after surface treatment. Details of form not stated are at the manufacturers option. 3.2 Tolerances of form and position ISO 8788. 1) Corresponds to the minimum tensile stress which the nut is able to withstand at ambient temperature without breaking or cracking when tested with a bolt of a higher

23、strength class. 2) Maximum temperature that the nut is able to withstand, without permanent alteration to its original characteristics, after ambient temperature has been restored. The maximum temperature is conditioned by the plastic ring. BS EN 4297:2017EN 4297:2017 (E) 5 3.3 Materials Threaded el

24、ement: FE-PA1801. Plastic ring: polyamide 6.6. 3.4 Surface treatment EN 2516, process class appropriate to the material These values in micrometres apply before surface treatment. They do not apply to threads the surface texture of which will be as achieved by usual manufacturing methods. Remove sha

25、rp edges 0,1 to 0,4 Key 1 90 to 120 a2 Thread 3 Threaded element 4 Plastic ring 5 Marking a All forms of entry (chamfer or radius) option within these limiting dimensions. bForm of contour within these limiting dimensions is at the manufacturers option. Diameter M may be tangential to, but shall not

26、 intrude on the flats. Figure 1 Ramax 6,3 Ramax 1,6 BS EN 4297:2017EN 4297:2017 (E) 6 Table 1 Diameter code Thread a E F H L M N P T Mass b min. Nom. Tol. max. Nom. Tol. min. max. min. min. min. 020 MJ2x0,4-4H6H 4,2 4 h12 3,2 2,2 +0,6 0 3,4 0,4 0,2 1 1,3 0,16 025 MJ2,5x0,45-4H6H 5,3 5 4 2,7 4,4 1,4

27、1,6 0,37 030 MJ3x0,5-4H6H 6,5 6 4,5 3,2 5,4 1,8 2 0,48 040 MJ4x0,7-4H6H 7,6 7 5,6 4,2 6,4 0,5 2,4 2,6 0,98 050 MJ5x0,8-4H6H 8,7 8 6,2 5,2 7,4 3,2 3,2 1,36 060 MJ6x1-4H5H 10,9 10 h13 7,5 6,3 +0,8 0 9,3 4 3,9 2,66 070 MJ7x1-4H5H 12 11 8,8 7,3 10,2 4,8 4,6 3,45 080 MJ8x1-4H5H 14,3 13 10 8,3 12,2 5,5 5,

28、2 6,03 100 MJ10x1,25-4H5H 18,9 17 11,5 10,3 16 0,6 0,3 7 6,5 12 120 MJ12x1,25-4H5H 21,1 19 13,8 12,3 18 8,6 7,8 18,2 140 MJ14x1,5-4H5H 24,5 22 16,1 14,4 21 10,2 9,1 26,9 160 MJ16x1,5-4H5H 26,8 24 18,4 16,4 23 11,8 10,4 33,4 180 MJ18x1,5-4H5H 30,2 27 20,7 18,4 26 13,4 11,7 50,6 200 MJ20x1,5-4H5H 33,6

29、 30 23 20,4 29 15 13 71,6 220 MJ22x1,5-4H5H 35,8 32 25,3 22,4 30,9 16,4 14,3 82 240 MJ24x2-4H5H 40,4 36 27,6 24,5 34,9 18,1 15,6 120 aIn accordance with ISO 5855-2. bApproximate values (kg/1 000 pieces), given for information purposes only. 4 Designation EXAMPLE Description block NUT Identity block

30、EN4297-050 Number of this standard Diameter code (see Table 1) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. BS EN 4297:2017EN 4297:2017 (E) 7 5 Marking EN 2424, style N. See Figure 1. 6 Technical specification ISO 5858, except for: Approval

31、of manufacturers: see EN 9100; Qualification of products: see EN 9133. This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Roya

32、l Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based

33、solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with

34、 the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and

35、 international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI pu

36、blications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the

37、 provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using st

38、andardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 cop

39、y is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create

40、 an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content fro

41、m BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 Brit

42、ish and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscriptio

43、n format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of member

44、ship, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, ema

45、il .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowle

46、dge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20