EN 4644-133-2016 en Aerospace series - Connector electrical and optical rectangular modular rectangular inserts operating temperature 175 (or 125 continuous - Part 133 Size 3 recep.pdf

1、BSI Standards PublicationBS EN 4644-133:2016Aerospace series Connector,electrical and optical,rectangular, modular,rectangular inserts, operatingtemperature 175 C (or 125 C)continuousPart 133: Size 3 receptacle for rack andpanel application, class C and D ProductStandardBS EN 4644-133:2016 BRITISH S

2、TANDARDNational forewordThis British Standard is the UK implementation of EN 4644-133:2016.It supersedes BS EN 4644-133:2011 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organiza

3、tions represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN

4、978 0 580 90784 5ICS 49.060; 49.090Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2016.Amendments issued since publicationDate Text affectedBS EN 4644-13

5、3:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4644-133 April 2016 ICS 49.060; 49.090 Supersedes EN 4644-133:2011English Version Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous - Part 133:

6、Size 3 receptacle for rack and panel application, class C and D - Product Standard Srie arospatiale - Connecteur, lectrique et optique, rectangulaire, modulaire, inserts rectangulaire, temprature de fonctionnement 175 C (ou 125 C) continu - Partie 133 : Embase, taille 3, pour applications rackables,

7、 classes C et D - Norme de produit Luft- und Raumfahrt - Elektrische und optische Rechtecksteckverbinder, modular, rechteckige Kontakteinstze, Dauerbetriebstemperatur 175 C (oder 125 C) konstant - Teil 133: Fester Steckverbinder, Gre 3, fr Einschubanwendungen, Klassen C und D - Produktnorm This Euro

8、pean Standard was approved by CEN on 27 September 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

9、 concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN memb

10、er into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Fra

11、nce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KO

12、MITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4644-133:2016 EBS EN 4644-133:2016EN 4644-133:2016 (E) 2 Contents Page European Foreword 3 1 Sco

13、pe 4 2 Normative references 4 3 Terms and definitions . 4 4 Required characteristics 4 5 Designation 9 6 Marking . 9 7 Technical specification 9 BS EN 4644-133:2016EN 4644-133:2016 (E) 3 European Foreword This document (EN 4644-133:2016) has been prepared by the Aerospace and Defence Industries Asso

14、ciation of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. Thi

15、s European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2016, and conflicting national standards shall be withdrawn at the latest by October 2016. Attention is drawn to the possibility that some of t

16、he elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 4644-133:2011. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

17、following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlan

18、ds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4644-133:2016EN 4644-133:2016 (E) 4 1 Scope This European Standard specifies the size 3 receptacle for rack and panel application used in the family of modular rectangular elec

19、trical and optical connector with rectangular inserts. The plug corresponding to this receptacle is defined in EN 4644-131. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references

20、, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 4644-001, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts operating temperature 175 C (or 125 C) continuous Par

21、t 001: Technical specification EN 4644-002, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts operating temperature 175 C (or 125 C) continuous Part 002: Specification of performance and contact arrangements EN 4644-131, Aerospace series Connector, electri

22、cal and optical, rectangular, modular, rectangular inserts operating temperature 175 C (or 125 C) continuous Part 131: Size 3 plug for rack and panel applications, class C and D Product standard 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4644-001

23、 apply. 4 Required characteristics 4.1 Dimensions and recommended panel cut out See Figure 1 and Figure 2. BS EN 4644-133:2016EN 4644-133:2016 (E) 5 Key 1 Coding pins 2 Dimension include a slight floating in the mating axis NOTE Ar, Br, Cr axis, see EN 4644-001. Figure 1 BS EN 4644-133:2016EN 4644-1

24、33:2016 (E) 6 Key 1 2 self-locking thread (see housing type in Clause designation for more details) Floating on Cr and Br axis = 1,4 mm min., 1,6 mm max. 2 See EN 4644-001 3 Chamfer NOTE Ar, Br, Cr axis, see EN 4644-001. Figure 2 Universal panel cut-out (compatible with all the shell coding) BS EN 4

25、644-133:2016EN 4644-133:2016 (E) 7 4.2 Mass 60 g max. 4.3 Panel cut-out coding When several size 3 connectors are used in the same equipment, a coding is available on the shell to associate the correct shell with the correct panel cut-out. On the panel cut-out, four area are coded, area 1, 2, 3 and

26、4 (see Figure 3). For each area, 1 of the 2 holes should be drilled (hole No. 1 or hole No. 2) Each hole on the panel cut-out corresponds to the use of a coding pin on the shell. Coding shown on Figure 3 as an example is: Coding H: 1221 Hole No. 1 drilled in Area 1 Hole No. 2 drilled in Area 2 Hole

27、No. 2 drilled in Area 3 Hole No. 1 drilled in Area 4 Key 1 Black holes correspond to holes that should not be machined in the example. Figure 3 Panel front view BS EN 4644-133:2016EN 4644-133:2016 (E) 8 Table 1 Panel cut-out coding Hole No. drilled in area Remarks 1 2 3 4 Shell coding equivalent to

28、the panel cut-out coding Position of the coding pin in Area 1 Position of the coding pin in Area 2 Position of the coding pin in Area 3 Position of the coding pin in Area 4 A Hole 1 and 2 drilled on the panel cut-out Coding pin delivered unassembled with the shell Hole 1 and 2 drilled on the panel c

29、ut-out Coding pin delivered unassembled with the shell Hole 1 and 2 drilled on the panel cut-out Coding pin delivered unassembled with the shell Hole 1 and 2 drilled on the panel cut-out Coding pin delivered unassembled with the shell Universal panel cut-out that could be used with all the shell B 1

30、 1 1 1 C 1 1 1 2 D 1 1 2 1 E 1 1 2 2 F 1 2 1 1 G 1 2 1 2 H 1 2 2 1 (shown in Figure 3) J 1 2 2 2 K 2 1 1 1 L 2 1 1 2 M 2 1 2 1 N 2 1 2 2 P 2 2 1 1 R 2 2 1 2 S 2 2 2 1 T 2 2 2 2 Z Connector delivered without coding pin BS EN 4644-133:2016EN 4644-133:2016 (E) 9 5 Designation EXAMPLE Description block

31、ELECTRICAL CONNECTOR, SIZE 3 RECEPTACLE Identity block EN4644-133 C M 000 G Number of this standard Shell class (see EN 4644-002) Housing type: (see Figure 2) M: locking thread M3 0,5. U: locking thread 4-40 UNC. Polarization code 999: shell delivered with no polarizing hardware 000: shell delivered

32、 with polarizing hardware unassembled Others codes: shell delivered with polarizing hardware assembled (see EN 4644-002) Panel cut-out coding A to T (see Table 1) 6 Marking Housing identification marking, as specified in Clause 5. In addition, marking shall show: date of manufacture (year-week); man

33、ufacturer name or trademark. 7 Technical specification See EN 4644-001. This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Roy

34、al Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape

35、their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achie

36、ve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions o

37、f BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Servic

38、es team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards f

39、rom your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS i

40、s an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL

41、) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publicati

42、ons are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documen

43、tation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publ

44、ication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice

45、can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW