EN 4645-001-2010 en Aerospace series - Connectors optical circular single and multipin coupled by threaded ring self-locking 1 25 mm diameter ferrule with removable alignment sleev.pdf

1、BS EN4645-001:2010ICS 49.060; 49.090NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Connectors, optical,circular, single andmultipin, coupledby threaded ring,self-locking 1,25 mmdiameter ferrule withremovable alignmentsleeve holderPart 001: Tech

2、nical specificationThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 28 February2010. BSI 2010ISBN 978 0 580 59243 0Amendments/corrigenda issued since publicationDate CommentsBS EN 4645-001:2010National forewordThis British Standard is the UK imple

3、mentation of EN 4645-001:2010.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport t

4、o include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 4645-001:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4645-001 January 2010 ICS 49.090 English Vers

5、ion Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 001: Technical specification Srie arospatiale - Connecteurs optiques circulaires accouplement par bague filete, aut

6、o-freinante ferrule 1,25 quips dun porte sleeve dmontable - Partie 001 : Spcificaton technique Luft- und Raumfahrt - Optische Rundsteckverbinder mit Schraubkupplung, selbstsichernd, Einzel- und Multipin, Ferrulendurchmesser 1,25 mm, demontierbarer Zentrierhlsenhalter - Teil 001: Technische Lieferbed

7、ingungen This European Standard was approved by CEN on 10 October 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliograp

8、hical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a

9、CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

10、 Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Mar

11、nix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4645-001:2010: EBS EN 4645-001:2010EN 4645-001:2010 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definiti

12、ons .6 4 Description .6 4.1 General 6 4.2 Receptacle 6 4.3 Plug .7 4.4 Materials and surface treatment .7 5 Design .7 5.1 Housings .7 5.2 Inserts .8 5.3 Removable sleeve holder 8 6 Definition drawings and masses 8 6.1 General 8 6.2 Mating dimensions of receptacles with male insert.8 6.3 Mating dimen

13、sions of plugs with female insert . 10 6.4 Displacement of the optical contact in the female insert . 11 6.5 Receptacle and plug polarization 12 7 Tests . 24 7.1 Tests according to EN 2591-100 24 7.2 Special tests Fluid resitance 29 8 Quality assurance . 30 8.1 General . 30 8.2 Qualification 30 8.3

14、Maintenance of qualification . 34 9 Designation and marking . 35 9.1 Connectors (receptacle or plug) . 35 9.2 Optical contact 36 BS EN 4645-001:2010EN 4645-001:2010 (E) 3 Foreword This document (EN 4645-001:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Stand

15、ardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall

16、 be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2010, and conflicting national standards shall be withdrawn at the latest by July 2010. Attention is drawn to the possibility that some of the elements of this document ma

17、y be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria

18、, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS

19、EN 4645-001:2010EN 4645-001:2010 (E) 4 Introduction This family of fibre optic connectors is derived from MIL-DTL-38999 series III and EN 3645-001. It is suitable for use on aerospace onboard applications. It provides easy access for optical contact end face cleaning. Standards for optical contacts

20、are defined in EN 4639-002. The connectors with shell size 11 and 13 are 100 % scoop proof. The optical contacts are capable of accepting single cable sizes up to a maximum of 2 mm outside diameter. BS EN 4645-001:2010EN 4645-001:2010 (E) 5 1 Scope This standard specifies the general characteristics

21、, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for threaded ring coupling circular fibre optic self-locking connectors, fire-resistant or non fire-resistant, intended for use in a temperature range from 65 C to 150 C continuous. 2 Normat

22、ive references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 68-1:1998, ISO general purpose

23、 screw threads Basic profile Part 1: Metric screw threads ISO 261:1998, ISO general purpose metric screw threads General plan ISO 262:1998, ISO general purpose metric screw threads Selected sizes for screws, bolts and nuts ISO 965-1:1998, ISO general-purpose metric screw threads Tolerances Part 1: P

24、rinciples and basic dataEN 2591-100*, Aerospace series Elements of electrical and optical connection Test methods Part 100: General. EN 3197, Aerospace series Installation of aircraft electrical and optical interconnection systems1) EN 3645-001, Aerospace series Connectors, electrical, circular, sco

25、op-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 001: Technical specification EN 4531-002, Aerospace series Connectors, optical, circular, single and multipin, coupled by threaded ring Flush contacts Part 002: Specification of performance and contact arr

26、angements EN 4639-002, Aerospace series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 002: List of product standards EN 4639-101, Aerospace series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferr

27、ule, with removable alignment sleeve holder Part 101: Optical contact for cable EN 4641-100 Operating temperatures between 65 C and 125 C Product standard EN 4639-102, Aerospace series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve hol

28、der Part 102: Optical contact for cable EN 4641-102 Operating temperatures between 55 C and 100 C Product standard EN 4645-003, Aerospace series Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder

29、Part 003: Square flange receptacle Product standard * And all parts quoted in this standard. 1) Published as ASD Prestandard at the date of publication of this standard. BS EN 4645-001:2010EN 4645-001:2010 (E) 6 EN 4645-004, Aerospace series Connectors, optical, circular, single and multipin, couple

30、d by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder Part 004: Jam nut receptacle Product standard EN 4645-005, Aerospace series Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with remova

31、ble alignment sleeve holder Part 005: Plug Product standard EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts MIL-DTL-38999, Connector, electrical circular, miniature, high density quick disconnect (bayonet, threaded and breech coupling), envir

32、onment resistant, removable crimp and hermetic solder contacts, general specification for2)MIL-STD-1373, Screw thread, modified, 60, stub, double2)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 2591-100 apply. 4 Description 4.1 General This document

33、describe optical connector arrangements for plug and receptacle housings. Plug and receptacle housings conform to EN 3645-001 standard. The connectors use rear removable optical contacts with a ferrule diameter of 1,25 mm. The receptacles connector with male arrangement as specified EN 4645-003 and

34、EN 4645-004. The plug connector with female arrangement as specified EN 4645-005. The female arrangement is equipped of a removable alignment sleeve holder as specified EN 4645-005. The sleeve holder is delivered with the female arrangement. It is considered as a part of the female arrangement (spec

35、ific design per manufacturer). The sleeve holder can be supplied separately only for repair purpose. The connectors are polarized by means of keyways and keys; polarization is obtained before the male contacts enter the insert of the female contacts and before the coupling ring is engaged. The posit

36、ion of the keying arrangement is given in EN 3645-001. The visual check of coupling is obtained by masking of a red coloured band on the receptacle. 4.2 Receptacle The receptacle may be attached by: 2) Published by: Department of Defense (DoD), the Pentagon, Washington, DC 20301, USA. BS EN 4645-001

37、:2010EN 4645-001:2010 (E) 7 square flange; jam nut. The receptacle contains five keyways in which the keys of the plug engage. The main keyway is fixed and is wider than the others. Polarization is ensured by the different positions which the secondary keyways may take. The position of the insert is

38、 fixed relative to the main keyway. 4.3 Plug The plug contains five keys which engage in the keyways of the receptacle. The main key is wider than the others. Polarization is ensured by the different positions which the secondary keys may take. The position of the insert is fixed relative to the mai

39、n key. The coupling ring permanently fitted on the plug enables the connectors to be coupled and uncoupled. The mating torque shall be lower than the unmating torque. The internal thread of the coupling ring may be treated with a suitable lubricant compatible with the performance required in this st

40、andard. 4.4 Materials and surface treatment 4.4.1 General When dissimilar metals are in close contact, adequate protection against corrosion shall be used for the electromotive force of the cell not to exceed 0,25 V (see EN 3197). 4.4.2 Housings The material of the connector housings and fittings sh

41、all be of suitable material protected against corrosion by passivation, nickel or cadmium plating (see EN 3197) as specified in the product standard. 4.4.3 Optical contacts and alignment sleeves The material of the optical contacts and alignment sleeves shall be of suitable materials as specified in

42、 the product standard. The optical contacts in both plug and receptacle are sprung-loaded. The spring force is defined in the product standard. 4.4.4 Metallic or non-metallic materials The materials used for insert, seals and grommets shall have hardness and mechanical characteristics consistent wit

43、h the required use. The material used for guiding pins shall have hardness and mechanical characteristics consistent with the required use. 5 Design 5.1 Housings The connector housings shall be in one unit. They contain teeth at the rear over the entire periphery and shall accommodate the cable outl

44、ets and other fittings. The receptacle shall be fitted with a seal for sealing the coupled housings. BS EN 4645-001:2010EN 4645-001:2010 (E) 8 The jam nut receptacle housing shall contain an O-ring seal (panel seal). The lock nut shall be provided with wire locking holes. Threads shall conform to st

45、andards ISO/R 68:1973, ISO/R 261:1973, ISO/R 262:1973 and ISO/R 965:1973, except for the triple start threads, which shall conform to standard MIL-STD-1373. The coupling ring shall be designed so that the optical contacts engage when it is screwed clockwise and disengage when it is unscrewed counter

46、 clockwise. The coupling ring shall be designed to provide a hand grip profile. Full locking of the connectors shall occur at approximately 360. On completion of tightening of the coupling ring, mechanical contact shall exist between the receptacle and plug shells. Masking of a red colour band on th

47、e receptacle shall show that the connectors are correctly mated. The front face of the plug shell shall seal when fully mated with the receptacle connector. 5.2 Inserts The insert carrying the optical contacts shall be in hard material and have a cross section and radii such that no cracks, flaking

48、or breaks can occur in normal operation. The insert for contacts shall be non-removable; it shall be mechanically held in the housing. Sealing shall be provided between the housing and insert. The mechanical contacts retention system shall be integrated in the hard insert. The design shall permit in

49、dividual installation of the contacts without removal of the connector. Fitting and removal of the contacts shall be from the rear. For ease of operation, tools as per MIL-I-81969/1-03 standard (P/N for size 16) may be used. Contact position identification shall be permanent and contrasted on the rear and the front face of the insert or grommet. The female insert (mounted into the plug connector), including the sleeve holder, shall incorporate two alignment pins for multiway con